Thanks for the suggestion. It's a no go there as well. I did an updatedb
then locate bconsole
/downloads/bacula-2.2.7/manpages/bconsole.8
/downloads/bacula-2.2.7/scripts/bconsole
/downloads/bacula-2.2.7/scripts/bconsole.in
/downloads/bacula-2.2.7/src/console/bconsole.conf
/downloads/bacula-2.2.7/src/console/bconsole.conf.in
/downloads/bacula-2.2.7/src/win32/installer/bconsole.conf.in
/root/bacula/bin/bconsole
/root/bacula/bin/bconsole.conf
/root/bacula/bin/man8/bconsole.8.gz
/sbin/bconsole
[EMAIL PROTECTED] etc]# /sbin/bconsole
bconsole not properly installed.
Not in /etc but it's in /sbin which I thought might be it. Failure.
So I can't run it from the /root/bacula/bin which is where my sysconfigdir
was pointed. I can't run it from /sbin/bconsole for whatever reason.. So
I'm pretty much SOL unless I didn't do a ./configure option right which I
don't think I did. There a newer version than 2.2.7 out there.?
From: Masopust, Christian [mailto:[EMAIL PROTECTED]
Sent: Friday, February 15, 2008 1:03 AM
To: Glen Vickers; bacula-users@lists.sourceforge.net
Subject: RE: [Bacula-users] Bacula console configuration failure
Hello Glen,
try to run bconsole from the "etc" directory...
christian
--
"I sense much NT in you, NT leads to Blue Screen.
Blue Screen leads to downtime, downtime leads to suffering. NT is the path
to the darkside."
- Unknown Unix Jedi
_____
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Glen
Vickers
Sent: Friday, February 15, 2008 9:00 AM
To: bacula-users@lists.sourceforge.net
Subject: [Bacula-users] Bacula console configuration failure
I'm following along in the bacula setup guide. I got the backups to work on
the test. My volume is wrong still and I wanted to update/change the
volumes and finalize my backup schedule. Small problem with that.
./bconsole
bconsole not properly installed.
[EMAIL PROTECTED] bin]#
I did the configure as the following...
CFLAGS="-g -Wall" \
./configure \
--sbindir=$HOME/bacula/bin \
--sysconfdir=$HOME/bacula/bin \
--mandir=$HOME/bacula/bin \
--enable-smartalloc \
--enable-gnome \
--with-qwt=$HOME/bacula/depkgs/qwt \
--enable-bwx-console \
--enable-console \
--enable-tray-monitor \
--with-pid-dir=$HOME/bacula/bin/working \
--with-subsys-dir=$HOME/bacula/bin/working \
--with-mysql \
--with-working-dir=$HOME/bacula/bin/working \
exit 0
I also had the email bit in there but took that out for my own reasons. So
I type in ./bconsole and get a failure saying it's not properly installed.
Is there a switch or something I missed? I'm on FC8 RH Linux. Everything
else seems to be fine but this.
As a side note I'm SSH'd into the server remotely. I also am attempting to
configure Webmin to operate Bacula as well but without the console working
properly that's not possible. I checked passwords and they match. Out of
ideas as to why the console thinks its not installed properly when I believe
it is. Suggestions?
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
