Mingus Dew pisze: > Hi all, > This is slightly off topic. I've been using an Exabyte Magnum 224 > autoloader with 12-slot magazine and single LTO-3 drive with Bacula > 2.2.7 for several months now. > I recently purchased an additional magazine to increase the number of > tapes in a given cycle. > > According to Exabyte I should only have to insert the magazine for the > autoloader to recognize it. Which it seemed to do. However, as a > precursor to using this with Bacula, I wanted to test the mtx status > output. > > [EMAIL PROTECTED]: mtx -f /dev/scsi/changer/c6t4d1 status > Storage Changer /dev/scsi/changer/c6t4d1:1 Drives, 13 Slots ( 1 > Import/Export ) > Data Transfer Element 0: Empty > Storage Element 1:Full > :VolumeTag=A00037 > Storage Element 2:Full > :VolumeTag=A00038 > Storage Element 3:Full > :VolumeTag=A00039 > Storage Element 4:Full:VolumeTag=A00040 > > Storage Element 5:Full > :VolumeTag=A00041 > Storage Element 6:Full > :VolumeTag=A00042 > Storage Element 7:Full > :VolumeTag=A00043 > Storage Element 8:Full > :VolumeTag=A00044 > Storage Element 9:Full > :VolumeTag=A00045 > Storage Element 10:Full > :VolumeTag=A00046 > Storage Element 11:Full > :VolumeTag=A00047 > Storage Element 12 IMPORT/EXPORT:Full :VolumeTag=A00048 > Storage Element 13:Empty :VolumeTag= > > So only 1 additional slot is seen, rather than the 12 more (24 total) > expected. Hi,
Our autoloader (Dell PV 124T) may be configured to report left, right or both magazines. Default setting was to report only left magazine. Maybe your problem is simmilar. Bye, R ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
