Thank you Jason and John, Mtx-changer was a good hint. I was using wrong SCSI device /dev/sg0 I was using this for Exabyte and had not problem.
With Tanabderg I had to use /dev/sg1 and it was working perfect. Like below ./mtx-changer /dev/sg1 list ./mtx-changer /ded/sg1 load 3 /dev/st0 0 So now I can write that Bacula and 1U Tandberg StorageLoader work nicely without any problem. Mtx-changer can be used to control the tape library and it works perfectly. Thank you all and I must applaud Bacula developers for developing such a great product. -Jai -----Original Message----- From: John Drescher [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 30, 2008 6:00 PM To: Jai Rangi; bacula users Subject: Re: [Bacula-users] Bacula with EXABYTE STORAGELOADER LTO 3 On Jan 30, 2008 9:00 PM, John Drescher <[EMAIL PROTECTED]> wrote: > > > > We just bought the TandBerg (Former Exabyte) 1U Storage Loader LTO3. I amn > > trying to configure that with Bacula. Has anyone done this so far. > > > > > > > > We also have Bacula + Exabyte Magnum 1×7 LTO Tape Auotloader. That works > > just perfect. I can use mtx-changer to manage the tapes between slots and > > drive. I want to know what utility I can I use for TandBerg 1U Storage > > Loader LTO3. > > > > > > > > Mtx-changer did not with with the new Storage Loader. > > > I would start with mtx directly and get it to load and unload tapes. > > John > -- John M. Drescher ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
