Hi Dan,
Thanks for the quick response. I'm running Bacula 2.2.6 on RedHat EL4 64
bit. The system is in production for close to two months backing up 8
clients and I haven't had a single hitch. Also, I've done batch labeling
multiple times before without ever encountering the mentioned problem. FYI,
I haven't changed any storage related parameters since going production.
Thanks.
Win
On Jan 21, 2008 9:19 AM, Dan Langille <[EMAIL PROTECTED]> wrote:
> Win Htin wrote:
> > Hi folks,
> >
> > I loaded 5 brand new tapes into the auto-changer and ran the label
> > command from "bconsole" with the following parameters.
> >
> > *label barcodes Storage=TS3200_1 Pool=Scratch Slots=26-30
> >
> > Only ONE volume was successfully labeled and the rest failed with
> > "ERR=Child died from signal 15." message. When I re-ran the label
> > command individually for each failed volume, everything went ok.
> > Wondering what might have been the root cause. FYI, there was no other
> > Bacula related activities during this period.
>
> Did your changer pass all the tests?
>
> This sounds like it may be a timing issue. Perhaps the solution is as
> easy as adding a sleep command into the autochanger script you are using.
>
> BTW, you didn't mention the Bacula version or the OS. However, in this
> case, I don't think that's the issue.
>
> >
> > Thanks in advance.
> >
> > Following is the actual output:
> > ============================================================
> > *label barcodes Storage=TS3200_1 Pool=Scratch Slots=26-30
> > Connecting to Storage daemon TS3200_1 at backupserver:9103 ...
> > 3306 Issuing autochanger "slots" command.
> > Device "LTO4_1" has 47 slots.
> > Connecting to Storage daemon TS3200_1 at backupserver:9103 ...
> > 3306 Issuing autochanger "list" command.
> > The following Volumes will be labeled:
> > Slot Volume
> > ==============
> > 26 935ABO
> > 27 936ABO
> > 28 937ABO
> > 29 938ABO
> > 30 939ABO
> > Do you want to label these Volumes? (yes|no): yes
> > Connecting to Storage daemon TS3200_1 at backupserver:9103 ...
> > Sending label command for Volume "935ABO" Slot 26 ...
> > 3307 Issuing autochanger "unload slot 2, drive 0" command.
> > 3304 Issuing autochanger "load slot 26, drive 0" command.
> > 3992 Bad autochanger "load slot 26, drive 0": ERR=Child died from signal
> > 15: Termination.
> > Results=Program killed by Bacula watchdog (timeout)
> > Label command failed for Volume 935ABO.
> >
> > Sending label command for Volume "936ABO" Slot 27 ...
> > 3301 Issuing autochanger "loaded? drive 0" command.
> > 3302 Autochanger "loaded? drive 0", result is Slot 26.
> > 3307 Issuing autochanger "unload slot 26, drive 0" command.
> > 3304 Issuing autochanger "load slot 27, drive 0" command.
> > 3992 Bad autochanger "load slot 27, drive 0": ERR=Child died from signal
> > 15: Termination.
> > Results=Program killed by Bacula watchdog (timeout)
> > Label command failed for Volume 936ABO.
> >
> > Sending label command for Volume "937ABO" Slot 28 ...
> > 3301 Issuing autochanger "loaded? drive 0" command.
> > 3302 Autochanger "loaded? drive 0", result is Slot 27.
> > 3307 Issuing autochanger "unload slot 27, drive 0" command.
> > 3304 Issuing autochanger "load slot 28, drive 0" command.
> > 3305 Autochanger "load slot 28, drive 0", status is OK.
> > 3301 Issuing autochanger "loaded? drive 0" command.
> > 3302 Autochanger "loaded? drive 0", result is Slot 28.
> > 3000 OK label. VolBytes=64512 DVD=0 Volume="937ABO" Device="LTO4_1"
> > (/dev/st0)
> > Catalog record for Volume "937ABO", Slot 28 successfully created.
> >
> > Sending label command for Volume "938ABO" Slot 29 ...
> > 3301 Issuing autochanger "loaded? drive 0" command.
> > 3302 Autochanger "loaded? drive 0", result is Slot 28.
> > 3307 Issuing autochanger "unload slot 28, drive 0" command.
> > 3304 Issuing autochanger "load slot 29, drive 0" command.
> > 3992 Bad autochanger "load slot 29, drive 0": ERR=Child died from signal
> > 15: Termination.
> > Results=Program killed by Bacula watchdog (timeout)
> > Label command failed for Volume 938ABO.
> >
> > Sending label command for Volume "939ABO" Slot 30 ...
> > 3301 Issuing autochanger "loaded? drive 0" command.
> > 3302 Autochanger "loaded? drive 0", result is Slot 29.
> > 3307 Issuing autochanger "unload slot 29, drive 0" command.
> > 3304 Issuing autochanger "load slot 30, drive 0" command.
> > 3992 Bad autochanger "load slot 30, drive 0": ERR=Child died from signal
> > 15: Termination.
> > Results=Program killed by Bacula watchdog (timeout)
> > Label command failed for Volume 939ABO.
> >
> > *update slots Storage=TS3200_1
> > ..
> > ..
> > Volume "935ABO" not found in catalog. Slot=26 InChanger set to zero.
> > Volume "936ABO" not found in catalog. Slot=27 InChanger set to zero.
> > Catalog record for Volume "937ABO" updated to reference slot 28.
> > Volume "938ABO" not found in catalog. Slot=29 InChanger set to zero.
> > Volume "939ABO" not found in catalog. Slot=30 InChanger set to zero.
> > *
>
>
> --
> Dan Langille
>
> BSDCan - The Technical BSD Conference : http://www.bsdcan.org/
> PGCon - The PostgreSQL Conference: http://www.pgcon.org/
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
