Hi, 18.01.2008 09:46, Jesper Krogh wrote: > Hi, > > my jobs has stopped with a blocked device, how do I make it start again? > > status 2 > > Device status: > Autochanger "LTO-4" with devices: > "LTO-4-0" (/dev/nst1) > Device "LTO-4-0" (/dev/nst1) is not open. > Device is BLOCKED. User unmounted during wait for media/mount. > Drive 1 status unknown. > ====
You use the 'mount' command... much like the 'unmount' you probably did earlier. Like so (i.e., right :-) : > *mount drive=1 > Automatically selected Catalog: MyCatalog > Using Catalog "MyCatalog" > Automatically selected Storage: LTO-4 > 3301 Issuing autochanger "loaded? drive 1" command. > 3302 Autochanger "loaded? drive 1", result: nothing loaded. > 3901 open device failed: ERR=dev.c:433 Unable to open device "LTO-4-0" > (/dev/nst1): ERR=No medium found > > * Of course, loading and - possibly - labeling a usable tape is best done before mounting again :-) If you're running this on an autochanger, Bacula should prompt you to specify a slot to load. In case of an autochanger, you also should ensure you've got the tape inventory up-to-date, i.e. 'update slots [scan]'. Arno > -- Arno Lehmann IT-Service Lehmann www.its-lehmann.de ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
