Hi,

11.01.2008 11:14, Robert Wirth wrote:
> Hi!
> 
> Running Bacula 1.38.11, I want to change the MaxStartDelay of a job.
> Situation:  
> 
> - several Jobs are started at 23:10 with priority 10
> - the Catalog job is started at 23:15 with priority 13
> 
> The MaxStartDelay for the Catalog job was 1 hour.  This was to short 
> (it came from the misunderstanding of MaxStartDelay which, I now learned
> to be likely a "MaxStartDelayAfterSchedule").
> The Catalog is aborted (without an email warning/error message) because
> higher jobs are still running 1 hour after it was _scheduled_ (and still
> waiting for the higher jobs to complete).
> 
> Manually run of the Catalog job in the morning works, thus the Job is ok.
> 
> Now, I increased the MaxStartDelay in the bacula-dir.conf to 6 hours.  
> Quite long enough that all higher jobs are completed before.   After 
> reloading the configuration using bconsole, nothing has changed :-(
> 
> I wonder if the value of MaxStartDelay is buffered somewhere in the
> Bacula DB, and changes on the configuration file will not proceed
> without an update of the DB entries?  
> (I tried to find out the value of MaxStartDelay using bconsole's show, 
> but I can't find it).

Show job=... might reveal it.

Other than that, I can only tell you that these values are not stored 
in the catalog, as far as I know. My job changes show up immediately 
after a 'reload'. But I haven't worked with the delay settings much...

Arno

> Any help welcome.
> 
> Regards,
> 
>       Robert
> 
> ----------------------------------------------------------------
> +++    German Research Center for Artificial Intelligence    +++
> +++       I N F R A  -  S T R U C T U R E  -  G R O U P      +++
> ----------------------------------------------------------------
> DFKI GmbH,ISG,Campus D32,Stuhlsatzenhausweg 3,66123 Saarbruecken
> @office: +49-681-302-5572,-5514,-5078 @telefax: +49-681-302-5020
> mailto:isg-sb(at)dfki.de     Germany     http://www.dfki.de/web/
> ----------------------------------------------------------------
> Deutsches Forschungszentrum fuer kuenstliche Intelligenz GmbH
> - Firmensitz Trippstadter Strasse 122, D-67663 Kaiserslautern
> 
> Geschaeftsfuehrung (executive board):
> - Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender)
> - Dr. Walter Olthoff
> 
> Vorsitzender des Aufsichtsrats (supervisory board chairman):
> - Prof. Dr. h.c. Hans A. Aukes
> 
> Amtsgericht Kaiserslautern, HRB 2313
> ----------------------------------------------------------------
> 
> 
> 
> 
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
> 

-- 
Arno Lehmann
IT-Service Lehmann
www.its-lehmann.de

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to