Hello, Since a few days I get "Block checksum mismatch" errors when trying to restore. I run bacula nearly a year now, I have done successfull restore jobs before. btape test completes successfull.
Errors looks like this: 19-Dec 08:29 bs1-sd JobId 3242: Error: block.c:318 Volume data error at 33:9495! Block checksum mismatch in block=9495 len=64512: calc=88d085a3 blk=cb1338f1 Next try: 19-Dec 11:33 bs1-sd JobId 3245: Error: block.c:318 Volume data error at 33:9495! Block checksum mismatch in block=9495 len=64512: calc=5218e505 blk=cb1338f1 Sometimes the error is on the same block, but with other calc value, another time I get the errors at a complete different block. The error appears with new tapes and with tapes being in use some month now. And yes, I have cleaned the drive with the cleaning tape. I'm using bacula 2.2.5 (debian-backports packages) on Debian Etch Tape drive is a SONY SDX-700C in an autochanger tape library SONY LIB-162. Regards, Henry ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
