Hi Michael, On Dienstag 18 Dezember 2007 23:46:26 wrote: > Hey guys, over the past week I have been attempting to restore to a > windows client with 512mb ram and no pagefile only to be frustrated > with "There is not enough storage to complete this operation". After > some searches this error seems to mean I've run out of memory! This is > a virtual machine with plenty of disk space and there is no reason > Bacula needs 400+mb of memory to transfer some 80GB of files over the > network. > > Monitoring the task manager through the process (after I upgraded the > machine to handle Bacula's memory appetite) revealed that Bacula's > memory usage continues to grow in size during the restore, finally > releasing the 400MB of ram used when the restore is finished. Perhaps > someone could take a gander at why this is happening?
can you please write which version of bacula and windows you use? The other guys here with programming skills on bacula need this information to give you some explanations! btw: for workaround is it surely possible to add temporary a bit of ram or a pagefile on a new virtual disk ... if really no disk space in the machine over iscsi ... Before you ask, the SLES10-SP1 has a iscsi target on board and a yast module to configure them. The client for win>=2k can you find under http://www.microsoft.com/downloads/details.aspx?familyid=12cb3c1a-15d6-4585-b385-befd1319f825&displaylang=en or with 'windows iscsi initiator' in your preferred search machine. Regards Falk ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
