Hello, 07.12.2007 08:45,, Johan van Vliet wrote:: > Hi, > > I have two questions about doing backups to harddisk with bacula. I'll put > them in seperate emails to keep this clean but they are somewhat related: > 1st - What is a good "volume/poll" setup? (Experience question) > 2nd - Why does my solution now only use inc-0003? (Config question). > > I'll use this email for the second question: > > My bacula has been running fine for a couple weeks. But since a couple > of days all Incrementals are added to "Inc-0003". I'm probably not doing > the automatic recycling for volumes correctly but I don't understand > where I made the mistake.
Most likely, in my opinion, is that the volume parameters for Inc-0003 are not set according to your pool defaults (which look ok, btw). This easily happens when you have volumes left from your setup and experimenting stage as the volume parameters are not automatically updated to reflect the current pool defaults. The pool settings are used as a template when creating new volumes. Using the update command, you can change them afterwards. In your case, check the actual volume parameters using 'llist volume=Inc-0003' in bconsole, and, if they are different to your expected settings, update them using the 'update volume=Inc-0003' command. Hope this helps, Arno -- Arno Lehmann IT-Service Lehmann www.its-lehmann.de ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
