Hi there, I am having some problems trying to get my Tape drive working with
Bacula. I am very new to the world of Bacula as I was only introduced to it
back at the BSDCan 2007 gathering. Basically I am setting up a new file server
and need to backup the data on a daily basis but can't get past the point of
simply testing my drive. When running the btape test command, it seems that it
is able to write to the device but unable to read from it. Here is the error
output: # ./btape -c bacula-sd.conf /dev/sa0Tape block granularity is 1024
bytes.btape: butil.c:285 Using device: "/dev/sa0" for writing.btape:
btape.c:368 open device "HP_Ultrium" (/dev/sa0): OK*test=== Write, rewind, and
re-read test ===I'm going to write 1000 records and an EOFthen write 1000
records and an EOF, then rewind,and re-read the data to verify that it is
correct.This is an *essential* feature ...btape: btape.c:827 Wrote 1000 blocks
of 64412 bytes.btape: btape.c:501 Wrote 1 EOF to "HP_Ultrium" (/dev/sa0)btape:
btape.c:843 Wrote 1000 blocks of 64412 bytes.btape: btape.c:501 Wrote 1 EOF to
"HP_Ultrium" (/dev/sa0)btape: btape.c:501 Wrote 1 EOF to "HP_Ultrium"
(/dev/sa0)btape: btape.c:852 Rewind OK.1000 blocks re-read correctly.07-Nov
15:28 btape JobId 0: Error: block.c:995 Read error on fd=3 at file:blk 0:1000
on device "HP_Ultrium" (/dev/sa0). ERR=Operation not permitted.btape:
btape.c:864 Read block 1001 failed! ERR=Operation not permitted Here is a
copy of my baculad-sd.conf file: Storage { #
definition of myself Name = quagmire-sd SDPort = 9103 #
Director's port WorkingDirectory = "/usr/local/bacula/bin/working" Pid
Directory = "/usr/local/bacula/bin/working" Maximum Concurrent Jobs = 20}
Director { Name = quagmire-dir Password = "somthing random"}
Director { Name = quagmire-mon Password = "somthing random" Monitor = yes}
Device { Name = HP_Ultrium Media Type = LTO Archive Device = /dev/sa0
AutomaticMount = yes; Device Type = Tape AlwaysOpen = yes Removable Media =
yes Random Access = no; AutoChanger = no#FreeBSD Settings Offline On Unmount
= no Hardware End of Medium = no BSF at EOM = yes Backward Space Record = no
Backward Space File = no Fast Forward Space File = no TWO EOF = yes}
Messages { Name = Standard director = quagmire-dir = all} My software setup
is as follows:FreeBSD 5.5 x86Bacula 2.2.5 (Installed from source)MySQL 5.0.45
My hardware setup is as follows:CPU - AMD AM2 5600+Motherboard - Asus
M2N-LRSCSI Card - Adaptec 2130SLP (PCIX Ultra320)Tape Drive - HP StorageWorks
Ultrium 448Data Cartridge - HP LTO2 Ultrium 400GB I have been trying various
FreeBSD suggested configuration changes but in the end, I'm always getting the
same error. I manually tar'd 40GB of data to the tape drive then extracted it
back and it worked flawlessly. So I am guessing its a configuration setting
that I either got wrong or am missing.Any help would be very appreciated.
Thanks! Brad.
(Sorry if this gets posted twice as I had a message awaiting approval but it
disappeared)
_________________________________________________________________
Send a smile, make someone laugh, have some fun! Start now!
http://www.freemessengeremoticons.ca/?icid=EMENCA122-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
