Michael Galloway schrieb: > [...] > with these changes implemented, the btape test passes (with a couple of > modifications to bacula-sd.conf) and the autochanger test passes. > > of of curiosity, what are others with LTO-4 using for scsi adapaters?
LSI20320, no problems with bacula. The only problem is that both HP LTO-4 drives only negotiate to U160 mode. Althought the controller offers U320 mode (min_period=0x08). mptscsih: ioc0: debug_level=00000200h mptspi: ioc0: id=1 Requested = 0x00000000 ( factor = 0x00 @ offset = 0x00 ) Vendor: HP Model: Ultrium 4-SCSI Rev: B12H Type: Sequential-Access ANSI SCSI revision: 05 mptspi: ioc0: id=1 min_period=0x08 max_offset=0x7f max_width=1 st 5:0:1:0: Attached scsi tape st0 st0: try direct i/o: yes (alignment 512 B) st 5:0:1:0: Attached scsi generic sg6 type 1 I tested this with an Adaptec 29320 and got the same U160 settings. But I didn't test bacula with the Adaptec controller, so I can't say if it would had worked with bacula. Ralf ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
