Hello, In my bacula configuration, I have a single client configuration (and job) for every one of my ~30 clients. However, recently, one of the jobs has started to act differently. When the backup starts, it starts again, only to cause the job to fail.
21-Oct 18:00 secnet-def: Start Backup JobId 4376, Job=sv27.2007-10-21_18.00.07 21-Oct 18:00 secnet-def: Start Backup JobId 4376, Job=sv27.2007-10-21_18.00.07 21-Oct 17:42 sv27: DIR and FD clocks differ by -1078 seconds, FD automatically adjusting. 21-Oct 18:00 secnet-def: Labeled new Volume "sv270095" on device "sv27" (/home/bacula/storage/d1). 21-Oct 18:00 secnet-def: Wrote label to prelabeled Volume "sv270095" on device "sv27" (/home/bacula/storage/d1) 21-Oct 18:00 secnet-def: Volume used once. Marking Volume "sv270095" as Used. 21-Oct 17:42 sv27: Generate VSS snapshots. Driver="VSS Win 2003", Drive(s)="CD" 21-Oct 18:00 secnet-def: Start Backup JobId 4376, Job=sv27.2007-10-21_18.00.07 21-Oct 17:42 sv27: DIR and FD clocks differ by -1078 seconds, FD automatically adjusting. 21-Oct 18:00 secnet-def: Labeled new Volume "sv270095" on device "sv27" (/home/bacula/storage/d1). 21-Oct 18:00 secnet-def: Wrote label to prelabeled Volume "sv270095" on device "sv27" (/home/bacula/storage/d1) 21-Oct 18:00 secnet-def: Volume used once. Marking Volume "sv270095" as Used. 21-Oct 17:42 sv27: Generate VSS snapshots. Driver="VSS Win 2003", Drive(s)="CD" 21-Oct 18:00 secnet-def: Start Backup JobId 4376, Job=sv27.2007-10-21_18.00.07 21-Oct 17:42 sv27: DIR and FD clocks differ by -1078 seconds, FD automatically adjusting. 21-Oct 18:00 secnet-def: Labeled new Volume "sv270095" on device "sv27" (/home/bacula/storage/d1). 21-Oct 18:00 secnet-def: Wrote label to prelabeled Volume "sv270095" on device "sv27" (/home/bacula/storage/d1) .... this volume labeling sherade continues to happen about 10 more times .... JobId: 4376 Job: sv27.2007-10-21_18.00.07 Backup Level: Incremental, since=2007-10-08 18:00:21 Client: "sv27" 2.0.0 (04Jan07) Linux,Cross-compile,Win32 FileSet: "sv27" 2007-07-10 09:43:58 Pool: "sv27" (From Job resource) Storage: "sv27" (From Job resource) Scheduled time: 21-Oct-2007 18:00:06 Start time: 21-Oct-2007 18:00:21 End time: 22-Oct-2007 18:01:02 Elapsed time: 1 day 41 secs Priority: 10 FD Files Written: 0 SD Files Written: 0 FD Bytes Written: 0 (0 B) SD Bytes Written: 0 (0 B) Rate: 0.0 KB/s Software Compression: None VSS: no Encryption: no Volume name(s): sv270095 Volume Session Id: 51 Volume Session Time: 1192828139 Last Volume Bytes: 2,999,807,971 (2.999 GB) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: Error SD termination status: Error Termination: *** Backup Error *** However, I will then get a second error for the same job (but not the same JobId!). 22-Oct 18:01 secnet-def: Start Backup JobId 4397, Job=sv27.2007-10-22_18.00.07 22-Oct 18:01 secnet-def: Start Backup JobId 4397, Job=sv27.2007-10-22_18.00.07 22-Oct 18:01 secnet-def: Created new Volume "sv270096" in catalog. 22-Oct 17:43 sv27: DIR and FD clocks differ by -1083 seconds, FD automatically adjusting. 22-Oct 18:01 secnet-def: sv27.2007-10-22_18.00.07 Fatal error: acquire.c:355 Wanted to append to Volume "sv270096", but device "sv27" (/home/bacula/storage/d1) is busy writing on "sv270095" . 22-Oct 17:43 sv27: sv27.2007-10-22_18.00.07 Fatal error: ../../filed/job.c:1751 Bad response to Append Data command. Wanted 3000 OK data , got 3903 Error append data 22-Oct 18:01 secnet-def: sv27.2007-10-22_18.00.07 Error: Bacula 2.0.3 (06Mar07): 22-Oct-2007 18:01:16 JobId: 4397 Job: sv27.2007-10-22_18.00.07 Backup Level: Incremental, since=2007-10-08 18:00:21 Client: "sv27" 2.0.0 (04Jan07) Linux,Cross-compile,Win32 FileSet: "sv27" 2007-07-10 09:43:58 Pool: "sv27" (From Job resource) Storage: "sv27" (From Job resource) Scheduled time: 22-Oct-2007 18:00:06 Start time: 22-Oct-2007 18:01:14 End time: 22-Oct-2007 18:01:16 Elapsed time: 2 secs Priority: 10 FD Files Written: 0 SD Files Written: 0 FD Bytes Written: 0 (0 B) SD Bytes Written: 0 (0 B) Rate: 0.0 KB/s Software Compression: None VSS: yes Encryption: no Volume name(s): Volume Session Id: 78 Volume Session Time: 1192828139 Last Volume Bytes: 0 (0 B) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: Error SD termination status: Error Termination: *** Backup Error *** Whats the dilio? Could this be a bug? Sincerely, -Michael ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
