On 18 Oct 2007 at 21:35, [EMAIL PROTECTED] wrote: > Dan, I've sent three replies to you but it looks like my email is being > blocked from your server. Thought I would keep the main stuff out of the > mailing list and the answers in it.
Why do you think the email is being blocked? Putting stuff on the list ensures others can correct my errors and ensures that you are getting good advice. > I do have full access now, no more dbase errors. I'm trying to find > information on your suggestion about setting the volume/catalog size. I am not sure you can set Volume size using the update command. I'm guessing you might not have anything useful in that Volume, in which case you could just delete it (using the delete command in bconsole). > > Here are the two jobs run again now; > > 18-Oct 15:54 qualsrv-dir JobId 21: Start Backup JobId 21, > Job=Client1.2007-10-18_15.54.03 > 18-Oct 15:54 qualsrv-dir JobId 21: Using Device "FileStorage" > 18-Oct 15:54 qualsrv-sd JobId 21: Volume "file1" previously written, moving > to > end of data. > 18-Oct 15:54 qualsrv-sd JobId 21: Ready to append to end of Volume "file1" > size=962 > 18-Oct 15:54 qualsrv-sd JobId 21: Job write elapsed time = 00:00:01, Transfer > rate = 0 bytes/second > 18-Oct 15:54 qualsrv-dir JobId 21: Bacula qualsrv-dir 2.2.5 (09Oct07): > 18-Oct-2007 15:54:34 > Build OS: i686-pc-linux-gnu redhat > JobId: 21 > Job: Client1.2007-10-18_15.54.03 > Backup Level: Incremental, since=2007-10-18 15:44:13 > Client: "qualsrv-fd" 2.2.5 (09Oct07) > i686-pc-linux-gnu,redhat, > FileSet: "Full Set" 2007-10-16 23:05:00 > Pool: "Default" (From Job resource) > Storage: "File" (From Job resource) > Scheduled time: 18-Oct-2007 15:53:57 > Start time: 18-Oct-2007 15:54:33 > End time: 18-Oct-2007 15:54:34 > Elapsed time: 1 sec > Priority: 10 > FD Files Written: 0 > SD Files Written: 0 > FD Bytes Written: 0 (0 B) > SD Bytes Written: 0 (0 B) > Rate: 0.0 KB/s > Software Compression: None > VSS: no > Encryption: no > Volume name(s): file1 > Volume Session Id: 1 > Volume Session Time: 1192740803 > Last Volume Bytes: 1,340 (1.340 KB) > Non-fatal FD errors: 0 > SD Errors: 0 > FD termination status: OK > SD termination status: OK > Termination: Backup OK > > 18-Oct 15:54 qualsrv-dir JobId 21: Begin pruning Jobs. > 18-Oct 15:54 qualsrv-dir JobId 21: No Jobs found to prune. > 18-Oct 15:54 qualsrv-dir JobId 21: Begin pruning Files. > 18-Oct 15:54 qualsrv-dir JobId 21: No Files found to prune. > 18-Oct 15:54 qualsrv-dir JobId 21: End auto prune. That job ran just fine. No errors. Nothing backed up, but then perhaps nothing has changed so there is nothing to backup. > -------------------------- > > 18-Oct 15:55 qualsrv-dir JobId 22: BeforeJob: run command > "/etc/bacula/make_catalog_backup bacula bacula" > 18-Oct 15:55 qualsrv-dir JobId 22: Start Backup JobId 22, > Job=BackupCatalog.2007-10-18_15.54.04 > 18-Oct 15:55 qualsrv-dir JobId 22: Using Device "FileStorage" > 18-Oct 15:55 qualsrv-sd JobId 22: Volume "file1" previously written, moving > to > end of data. > 18-Oct 15:55 qualsrv-sd JobId 22: Ready to append to end of Volume "file1" > size=1340 > 18-Oct 15:55 qualsrv-sd JobId 22: Job write elapsed time = 00:00:01, Transfer > rate = 562.3 K bytes/second > 18-Oct 15:55 qualsrv-dir JobId 22: Bacula qualsrv-dir 2.2.5 (09Oct07): > 18-Oct-2007 15:55:01 > Build OS: i686-pc-linux-gnu redhat > JobId: 22 > Job: BackupCatalog.2007-10-18_15.54.04 > Backup Level: Full > Client: "qualsrv-fd" 2.2.5 (09Oct07) > i686-pc-linux-gnu,redhat, > FileSet: "Catalog" 2007-10-16 23:10:00 > Pool: "Default" (From Job resource) > Storage: "File" (From Job resource) > Scheduled time: 18-Oct-2007 15:54:57 > Start time: 18-Oct-2007 15:55:01 > End time: 18-Oct-2007 15:55:01 > Elapsed time: 0 secs > Priority: 11 > FD Files Written: 1 > SD Files Written: 1 > FD Bytes Written: 562,207 (562.2 KB) > SD Bytes Written: 562,320 (562.3 KB) > Rate: 0.0 KB/s > Software Compression: None > VSS: no > Encryption: no > Volume name(s): file1 > Volume Session Id: 2 > Volume Session Time: 1192740803 > Last Volume Bytes: 564,480 (564.4 KB) > Non-fatal FD errors: 0 > SD Errors: 0 > FD termination status: OK > SD termination status: OK > Termination: Backup OK > > 18-Oct 15:55 qualsrv-dir JobId 22: Begin pruning Jobs. > 18-Oct 15:55 qualsrv-dir JobId 22: No Jobs found to prune. > 18-Oct 15:55 qualsrv-dir JobId 22: Begin pruning Files. > 18-Oct 15:55 qualsrv-dir JobId 22: No Files found to prune. > 18-Oct 15:55 qualsrv-dir JobId 22: End auto prune. > > 18-Oct 15:55 qualsrv-dir JobId 22: AfterJob: run command > "/etc/bacula/delete_catalog_backup" That's OK too. Jobs are running fine. -- Dan Langille - http://www.langille.org/ Available for hire: http://www.freebsddiary.org/dan_langille.php ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
