Sorry, I meant after running the device and changer tests, I need more information on what is wrong. Child died from signal 15?
=== Autochanger test === 3301 Issuing autochanger "loaded" command. Slot 1 loaded. I am going to unload it. 3302 Issuing autochanger "unload 1 0" command. unload status=Bad 268435457 3992 Bad autochanger command: /etc/bacula/mtx-changer /dev/sg0 unload 1 /dev/nst0 0 3992 result="Unloading Data Transfer Element into Storage Element 1...mtx: Request Sense: Long Report=yes ": ERR=Child exited with code 1 3303 Issuing autochanger "load 1 0" command. 3993 Bad autochanger command: /etc/bacula/mtx-changer /dev/sg0 load 1 /dev/nst0 0 3993 result="Drive 0 Full (Storage Element 1 loaded) ": ERR=Child died from signal 15: Termination You must correct this error or the Autochanger will not work. Mike >I've successfully run btape and the test functions on the tape drive in my >changer. >I can't seem to find any information on how I will be using the changer >itself now, to add/remove tapes, change them, etc. ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
