Hi List,
this is the last bacula message:
01-Sep 08:31 backup-sd-bb: 3301 Issuing autochanger "loaded? drive 0" command.
01-Sep 08:31 backup-sd-bb: 3302 Autochanger "loaded? drive 0", result is Slot
20.
01-Sep 08:31 backup-sd-bb: Volume "FUL110" previously written, moving to end of
data.
status sd
Autochanger "JBBB" with devices:
"JBBB-1" (/dev/nst0)
"JBBB-2" (/dev/nst1)
Device "JBBB-1" (/dev/nst0) is mounted with:
Volume: FUL110
Pool: FUL
Media type: SDLT-320
Device is being initialized.
Slot 20 is loaded in drive 0.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
tape library drive status
Tape Motion Reading
since one hour the "end of data" is not found ...
looks like a defective tape.
how does bacula find the end of data?
first forward to the last written file/block, and if this fails, reading the
tape from beginning to find the end of data?
this could explain the tape motion "Reading" and the time it took, the tape was
filled with 175GB.
i have canceled this operation by shutting down the sd and ejecting the tape
with mtx.
is there a better way to handle this ?
Regards
Thomas
grrrr, the next tape failed also:
01-Sep 11:14 backup-sd-bb: zlato.bb.ic3s.de.2007-08-31_23.01.10 Error: Unable
to position to end of data on device "JBBB-1"
(/dev/nst0): ERR=dev.c:885 ioctl MTEOM error on "JBBB-1" (/dev/nst0).
ERR=Eingabe-/Ausgabefehler.
01-Sep 11:14 backup-sd-bb: Marking Volume "FUL111" in Error in Catalog.
this one fails faster it contains only ~ 500 MB,
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
