I am trying to migrate my bacula system to a newer machine. I have installed bacula with mysql with no problems. I installed a Dell PV 132 T to this machine and ran "cat /proc/scsi/scsi" and got the following results: Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0 Type: Processor ANSI SCSI revision: 02 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: MegaRAID Model: LD 0 RAID1 279G Rev: 521X Type: Direct-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 06 Lun: 00 Vendor: IBM Model: ULTRIUM-TD2 Rev: 333K Type: Sequential-Access ANSI SCSI revision: 03
Then when I run the command "mtx -f /dev/sg2 inquiry," I get the following results: mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=0 (Unknown?!) mtx: Request Sense: Sense Key=No Sense mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx: Request Sense: ILI=no mtx: Request Sense: Additional Sense Code = 00 mtx: Request Sense: Additional Sense Qualifier = 00 mtx: Request Sense: BPV=no mtx: Request Sense: Error in CDB=no mtx: Request Sense: SKSV=no INQUIRY Command Failed Would anyone know the cause of this error? I have the device set at the factory default settings except I have turned off the scanner, since I don't have any barcodes. TIA Mike -- View this message in context: http://www.nabble.com/Setting-up-a-Dell-PV-132T-tf4152467.html#a11813266 Sent from the Bacula - Users mailing list archive at Nabble.com. ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
