>>>>> On Tue, 10 Jul 2007 18:15:06 -0600, Ken Gunderson said: > > On Tue, 10 Jul 2007 18:59:37 +0100 > Martin Simmons <[EMAIL PROTECTED]> wrote: > > > >>>>> On Tue, 10 Jul 2007 09:10:24 -0600, Ken Gunderson said: > > > > > > On Tue, 10 Jul 2007 11:12:35 +0100 > > > Martin Simmons <[EMAIL PROTECTED]> wrote: > > > > > > > >>>>> On Mon, 9 Jul 2007 20:27:23 -0600, Ken Gunderson said: > > > > > > > > > > Greetings: > > > > > > > > > > Since my baffled post I've been doing some testing w/various sd.conf > > > > > tweaks. btape results and fbsd ports message initially recommended: > > > > > > > > > > Due to lack of some features in the FreeBSD tape driver > > > > > implementation you MUST add some OS dependent options to > > > > > the bacula-sd.conf file: > > > > > > > > > > Hardware End of Medium = no; > > > > > Backward Space Record = no; > > > > > Backward Space File = no; > > > > > > > > > > With 2 filemarks at EOT (see man mt): > > > > > Fast Forward Space File = no; > > > > > BSF at EOM = yes; > > > > > TWO EOF = yes; > > > > > > > > > > > > > > > While btape completes w/above no problem, from man mt it looks like > > > > > FBSD > > > > > supports bsr, however, and a few tests from command line seem to > > > > > confirm so I trimmed sd.conf down thusly: > > > > > > > > > > Hardware End of Medium = no; > > > > > Fast Forward Space File = no; > > > > > BSF at EOM = yes; > > > > > TWO EOF = yes; > > > > > > > > > > btape test completes fine and no longer recommend the bsr related > > > > > tweaks. Maybe they're not necessary and btape should be modified? > > > > > Don't know about fill results yet - running now. Hopefully I'll > > > > > encounter the magic incantation to get my autochanger to actually > > > > > change tapes... > > > > > > > > In the current Bacula tape driver, Backward Space Record is only used to > > > > verify that the last block has been written correctly when a tape gets > > > > full, > > > > it is not strictly necessary. In addition, the setting of Backward > > > > Space File > > > > is ignored (bsf must work). > > > > > > > > You might be able to use these settings on some FBSD tape drives: > > > > > > > > Fast Forward Space File = yes > > > > BSF at EOM = no > > > > TWO EOF = no > > > > > > > > __Martin > > > > > > Thanks. I know that it's optional and not needed. But it seems btape's > > > suggestions regarding sd.conf tweaks may be a bit inconsistent depending > > > upon what flags are already set. > > > > > > This is all a bit confusing on FBSD because per mtio man page various > > > calls referenced in sd.conf docs are supported, e.g. mtiocget, mtbsr, > > > mtfsf, etc. Whether they're supported by SCSI device/driver remains > > > uncertain, as I don't know how to test. In this case I'm using LSI > > > controller and mpt driver. My assumption was that since btape said I > > > needed sd flags such as Backward Space Record, etc. that it did not. > > > But it looks like it does. So I'm wondering whether the issue is with > > > btape erroneously reporting or the mpt driver. > > > > > > To recap, btape and manual backups and restores work but Autochanger is > > > not changing tapes when it should so I suspected something was not > > > quite right in sd.conf. > > > > AFAIK, problems with the mechanics of tape changing in the autochanger will > > not be affected by any of the mtio options. The changer is a separate > > device > > with its own protocol. > > > > __Martin > > But is not the drive itself responsible for sending eom so that changer > device knows it's time to swap tapes?
Yes, but you said that the btape fill test worked, so that suggests eom handling is working. I don't think you ever posted any logs showing exactly what doesn't work! Also, does a backup load the correct tape at the start? __Martin ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
