on 07/02/07 19:28 tomasz dereszynski wrote: [SNIP] > > have u tried to debug mtx? I tried using mtx to do this too. > > i have seen this error output earlier with quantum and that was hardware > problem with autochanger. > > and i think its always good idea to use whole command like according to > mtx-changer > <ciach> > # mtx-changer /dev/sg0 load 1 /dev/nst0 0 (on a Linux system) > </ciach> > which will be nearly the same for mtx 'mtx /dev/sg0 load 1 /dev/nst0 0' > That actually worked for a short while. I could load the drive from slot 1. When I tried to unload it: # /etc/bacula/mtx-changer /dev/sg0 unload 1 /dev/nst0 0 Unloading drive 0 into Storage Element 1...mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=70 (Current) mtx: Request Sense: Sense Key=Aborted Command mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx: Request Sense: ILI=no mtx: Request Sense: Additional Sense Code = 4E mtx: Request Sense: Additional Sense Qualifier = 00 mtx: Request Sense: BPV=no mtx: Request Sense: Error in CDB=no mtx: Request Sense: SKSV=no MOVE MEDIUM from Element Address 82 to 1 Failed
and now the status call fails again (and I'm no where near the physical device - so I can't turn it off from here :( Could this be a faulty device? (seems more like "sensitive" firmware). > AFAIK u can easy change mode on this pv-122t so you can try both methods. I would be very happy if you could tell me how? as I stated I only found a method for the 120t - and the 122t manual only says it "automatically selects the right mode". Thank you in advance -- Regards, Klavs Klavsen, GSEC - [EMAIL PROTECTED] - http://www.vsen.dk PGP: 7E063C62/2873 188C 968E 600D D8F8 B8DA 3D3A 0B79 7E06 3C62 "Those who do not understand Unix are condemned to reinvent it, poorly." --Henry Spencer ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
