Aha! There's my problem: I neglected to edit the Autochanger section's
"Changer Command =" line to reflect my own server's directory structure.
It seems to be working now. There's no initial error message when I launch
btape, and the autochanger test section has passed. I'm moving on to the
multiple-tape fill test. (Good thing it's the weekend!)
-dP
-----Original Message-----
From: Michael Nelson [SPAM-Blocked]
Sent: Friday, April 27, 2007 5:03 PM
To: Petcher, Daniel
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Dell PV124T (LTO3) autochanger problem remains
Daniel, here's my bacula-sd.conf file which works fine with my Quantum
Superloader3 with a single LTO-3 drive:
#
# Bacula Storage Daemon Configuration file # # For Bacula release 1.38.11
(28 June 2006) -- redhat #
Storage { # definition of myself
Name = nts-sd
SDPort = 9103 # Director's port
WorkingDirectory = "/var/bacula"
Pid Directory = "/var/run"
Maximum Concurrent Jobs = 20
}
#
# List Directors who are permitted to contact Storage daemon # Director {
Name = nts-dir
Password = ""
}
#
# Restricted Director, used by tray-monitor to get the
# status of the storage daemon
#
Director {
Name = nts-mon
Password = ""
Monitor = yes
}
#
# Devices supported by this Storage daemon # To connect, the Director's
bacula-dir.conf must have the # same Name and MediaType.
#
Device {
Name = FileStorage
Media Type = File
Archive Device = /var/bacula/archive
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = no;
AlwaysOpen = no;
}
#
# An autochanger device with two drives
#
Autochanger {
Name = Autochanger
Device = Drive-1
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg3
}
Device {
Name = Drive-1 #
Drive Index = 0
Media Type = LTO-3
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Maximum Spool Size = 161061273600 # 150GB in bytes
Maximum Job Spool Size = 107374182400 #100GB in bytes
Spool Directory = /var/bacula/spool
AutoChanger = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
#
# Send all messages to the Director,
# mount messages also are sent to the email address # Messages {
Name = Standard
director = nts-dir = all
}
Here is the pertinent section from bacula-dir.conf:
# Definition of LTO-3 tape storage device Storage {
Name = Autochanger
Address = 10.10.0.8
SDPort = 9103
Password = ""
Device = Drive-1 # must be same as Device in Storage
daemon
Media Type = LTO-3 # must be same as MediaType in
Storage daemon
Autochanger = yes # enable for autochanger device
}
Try modifying those to fit your configuration.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
