Hi, On 4/24/2007 11:17 AM, Ralf Winkler wrote: > Arno, > > thanks. > > I created now two subdirectories, full and diff. > > In the sd the filestorage sections now point to /var/int_backup/full and > /var/int_backup/diff. > > Running two jobs, one full one diff give me this result: > > Device status: > Device "FileStorage" (/var/int_backup) is not open or does not exist. > Device "FileStorage2" (/var/int_backup/diff) is not open or does not exist. > Device "FileStorage3" (/var/int_backup/full) is mounted with > Volume="Veritas-Diff-0012" Pool="Diff" > Total Bytes=129,217,537 Blocks=2,003 Bytes/block=64,512 > Positioned at File=0 Block=129,217,752 > > I will give up for today.
I suppose you see this mail the next working day in your timezone :-) How did you run these jobs? Or, more low-level - which storage devices do they require? What you observe looks like they run on the same storage, but require different pools. To fix this, you only need to ensure that the jobs use different storage devices. Either do that per client, or per pool. Arno > Ralf > > > > On 4/24/07, * Arno Lehmann* <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > Hi, > > On 4/24/2007 10:09 AM, Ralf Winkler wrote: > > I am cross eyed now. > > I can not find where i did the mistake. > > So maybe someone on this list can it point out to me. > > > > I do a full backup every monday, and a differential all other days. > > I create to Pools, one for the full, one for the diff. > > Also create two Storages. > > But if there is a full is running, the differential get blocked. > > > > As far as i understand the documentation, it should be possible > to have > > a full and a differential running at the same time. > > > > Here is the error message! > > > > Jobs waiting to reserve a drive: > > 3608 JobId=374 wants Pool="Diff" but have Pool="Full" on drive > > "FileStorage3" (/var/int_backup). > > 3607 JobId=374 wants Vol="Veritas-Diff-0011" drive has Vol="" on > > drive "FileStorage3" (/var/int_backup). > > Ok, the problem is that both jobs refer to the same storage device: > FileStorage3. > > > > Here the config: > > > > bacula-dir.conf > ... > FileStorage2 and FileStorage3 are defined. Good. > > > Storage { > > Name = Full > > # Do not use "localhost" here > > # Address = veritas-safebox # N.B. Use a fully qualified > name here > > Address = 192.168.0.253 <http://192.168.0.253> > <http://192.168.0.253> # N.B. Use a > > fully qualified name here > > Is that *really* your Address line? I'm a little astonished about the > <http://-stuff... > > > SDPort = 9103 > > Password = "<pw>" > > Device = FileStorage3 > > Media Type = File > > Maximum Concurrent Jobs = 4 > > } > > > > Storage { > > Name = Diff > > # Do not use "localhost" here > > # Address = veritas-safebox # N.B. Use a fully qualified > name here > > Address = 192.168.0.253 <http://192.168.0.253> > <http://192.168.0.253> # N.B. Use a > > fully qualified name here > > SDPort = 9103 > > Password = "<pw>" > > Device = FileStorage2 > > Media Type = File > > Maximum Concurrent Jobs = 4 > > > > # Default pool definition > > Pool { > > Name = Default > > Pool Type = Backup > > Recycle = yes # Bacula can automatically > recycle > > Volumes > > AutoPrune = yes # Prune expired volumes > > Volume Retention = 10 days # one year > > Accept Any Volume = yes # write on any volume in > the pool > > VolumeUseDuration = 1200 m > > Maximum Volumes = 8 > > LabelFormat = "Veritas-File" > > } > > > > Pool { > > Name = Full > > Pool Type = Backup > > Recycle = no > > AutoPrune = yes > > Volume Retention = 100d > > VolumeUseDuration = 6d > > Accept Any Volume = yes > > LabelFormat = "Veritas-Full-" > > } > > > > > > Pool { > > Name = Diff > > Pool Type = Backup > > Recycle = no > > AutoPrune = yes > > Volume Retention = 14d > > VolumeUseDuration = 23h > > Accept Any Volume = yes > > LabelFormat = "Veritas-Diff-" > > } > > One solution would be to link each pool to its own storage device, using > a Storage= directive. > > > Client: > > JobDefs { > > Name = "Amy-Def" > > Type = Backup > > Level = Differential > > Client = Amy-fd > > FileSet = "Fileset-Amy" > > Schedule = "WeeklyCycle-Amy" > > Storage = File > > Messages = Failed > > Pool = Default > > Full Backup Pool = Full > > Differential Backup Pool = Diff > > Priority = 10 > > } > > > > > > JobDefs { > > Name = "Amy-Def" > > Type = Backup > > Level = Full > > Client = Amy-fd > > FileSet = "Fileset-Amy" > > Schedule = "WeeklyCycle-Amy" > > Storage = Full > > Messages = Failed > > Pool = Full > > Full Backup Pool = Full > > Differential Backup Pool = Diff > > Priority = 10 > > } > > > > Schedule { > > Name = "WeeklyCycle-Amy" > > Run = Level=Full Pool=Full mon at 14:20 > > Run = Level=Differential Pool=Diff tue-fri at 14:20 > > } > > This looks ok, but you seem to have two JobDefs "Amy-Def". > > For different storage devices for the levels, you could also add a > storage= override to the schedule lines. > > > > > > > bacula-sd.conf > > > > Device { > > Name = FileStorage > > Media Type = File > > Archive Device = /var/int_backup > > LabelMedia = yes; # lets Bacula label > unlabeled media > > Random Access = Yes; > > AutomaticMount = yes; # when device opened, read it > > RemovableMedia = no; > > AlwaysOpen = no; > > } > > Device { > > Name = FileStorage2 > > Media Type = File > > Archive Device = /var/int_backup > > LabelMedia = yes; # lets Bacula label > unlabeled media > > Random Access = Yes; > > AutomaticMount = yes; # when device opened, read it > > RemovableMedia = no; > > AlwaysOpen = no; > > } > > Device { > > Name = FileStorage3 > > Media Type = File > > Archive Device = /var/int_backup > > LabelMedia = yes; # lets Bacula label > unlabeled media > > Random Access = Yes; > > AutomaticMount = yes; # when device opened, read it > > RemovableMedia = no; > > AlwaysOpen = no; > > } > > I'm not sure that it's agood ida to have the storages use the same > directory; using identical Media Types will work then, probably, but I'd > prefer different storage directories and different media types. > > > The system is Debian 3.1 and Bacula in the version 1.38.11. > > > > TIA > > Ralf > > > The ky problem is that you use the same storage device for all your > jobs, curently. > > Arno > > -- > IT-Service Lehmann [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > Arno Lehmann http://www.its-lehmann.de > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > <http://sourceforge.net/powerbar/db2/> > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > <mailto:Bacula-users@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > > > ------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users -- IT-Service Lehmann [EMAIL PROTECTED] Arno Lehmann http://www.its-lehmann.de ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
