This is what I got in the bacula console :
Connecting to Director ILEMMA009:9101
1000 OK: ilemma009-dir Version: 2.0.3 (06 March 2007)
Enter a period to cancel a command.
*messages
29-Mar 09:11 ilemma009-dir: Start Backup JobId 31, Job=Client1.2007-03-29_09.11.
00
29-Mar 09:11 ilemma009-sd: Job Client1.2007-03-29_09.11.00 waiting. Cannot find
any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: "HPStorageTape0" (Tape0)
Media type: HPUltriumTape
Pool: Default
29-Mar 09:11 ilemma009-dir: Client1.2007-03-29_09.11.00 Error: ../../lib/message
.c:713 Operator mail program terminated in error.
CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula) Administrato
r" -s "Bacula: Intervention needed for Client1.2007-03-29_09.11.00" Administrato
r
ERR=Unknown error
*label
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
Automatically selected Storage: HPTape
Connecting to Storage daemon HPTape at ILEMMA009:9103 ...
Enter autochanger drive[0]:
Enter new Volume name: A
Enter slot (0 or Enter for none): 0
Automatically selected Pool: Default
Connecting to Storage daemon HPTape at ILEMMA009:9103 ...
Sending label command for Volume "A" Slot 0 ...
Invalid slot=0 defined, cannot autoload Volume.
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3912 Failed to label Volume: ERR=../../stored/dev.c:764 Rewind error on "HPStora
geTape0" (Tape0). ERR=Unknown error.
Label command failed for Volume A.
Do not forget to mount the drive!!!
*mount
Automatically selected Storage: HPTape
Enter autochanger drive[0]: 1
Enter autochanger slot: 1
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 1, drive 1" command.
3305 Autochanger "load slot 1, drive 1", status is OK.
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3901 open device failed: ERR=../../stored/dev.c:425 Unable to open device "HPSto
rageTape1" (Tape1): ERR=No such file or directory
*mount
Automatically selected Storage: HPTape
Enter autochanger drive[0]:
Enter autochanger slot: 1
3001 OK mount. Device="HPStorageTape0" (Tape0)
*label
Automatically selected Storage: HPTape
Enter autochanger drive[0]:
Enter new Volume name: A
Enter slot (0 or Enter for none): 1
Automatically selected Pool: Default
Connecting to Storage daemon HPTape at ILEMMA009:9103 ...
Sending label command for Volume "A" Slot 1 ...
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 1, drive 0" command.
3305 Autochanger "load slot 1, drive 0", status is OK.
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result is Slot 1.
3920 Cannot label Volume because it is already labeled: "TestVolume1"
Label command failed for Volume A.
Do not forget to mount the drive!!!
You have messages.
*messages
29-Mar 09:13 ilemma009-sd: Job Client1.2007-03-29_09.11.00 waiting. Cannot find
any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: "HPStorageTape0" (Tape0)
Media type: HPUltriumTape
Pool: Default
29-Mar 09:13 ilemma009-dir: Client1.2007-03-29_09.11.00 Error: ../../lib/message
.c:713 Operator mail program terminated in error.
CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula) Administrato
r" -s "Bacula: Intervention needed for Client1.2007-03-29_09.11.00" Administrato
r
ERR=Unknown error
*label
Automatically selected Storage: HPTape
Enter autochanger drive[0]:
Enter new Volume name: HPStorageTape0
Enter slot (0 or Enter for none): 1
Automatically selected Pool: Default
Connecting to Storage daemon HPTape at ILEMMA009:9103 ...
Sending label command for Volume "HPStorageTape0" Slot 1 ...
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result is Slot 1.
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result is Slot 1.
3920 Cannot label Volume because it is already labeled: "TestVolume1"
Label command failed for Volume HPStorageTape0.
Do not forget to mount the drive!!!
*messages
You have no messages.
*
I don't understand what he needs !
because I have this in the director always when launching a job : (it doesn't
change for a long time !)
Running Jobs:
Writing: Full Backup job Client1 JobId=31 Volume=""
pool="Default" device=""HPStorageTape0" (Tape0)"
spooling=0 despooling=0 despool_wait=0
Files=0 Bytes=0 Bytes/sec=0
FDReadSeqNo=6 in_msg=6 out_msg=4 fd=784
====
----- Message d'origine ----
De : Kern Sibbald <[EMAIL PROTECTED]>
À : bacula-users@lists.sourceforge.net
Envoyé le : Mercredi, 28 Mars 2007, 14h01mn 29s
Objet : Re: [Bacula-users] ioctl MTWEOF error (was :Windows::Permission denied)
On Wednesday 28 March 2007 15:28, Brian Debelius wrote:
> So does the statement from btape 'The last block of the first tape
> matches.' tell us that everything is ok even though the we received the
> error?
Yes, I should have mentioned, that as far as I can see from the write part and
the seek/read back part, it worked.
That said, as I mentioned, I believe that the WEOF error is indication of a
bad driver (or Bacula not understanding Win32 error codes, or a real
problem), and I wouldn't run my tape drives that way.
>
> 6-Mar 18:39 btape: Ready to read from volume "TestVolume1" on device
> "HPStorage
> Tape0" (Tape0).
> Rewinding.
> Reading the first 10000 records from 0:0.
> 10000 records read now at 1:5084
> Reposition from 1:5084 to 148:13127
> Reading block 13127.
>
> The last block of the first tape matches.
>
> Kern Sibbald wrote:
> > On Wednesday 28 March 2007 12:57, Brian Debelius wrote:
> >
> >> A workaround, which I do because i have not figured out how to correct
> >> this, is to just make sure your backups do not fill the tape.
> >>
> >
> > First, these problems are not normally fatal, but I wouldn't run my tape
drive
> > like that.
> >
> > Excluding tape/drive errors which produce similar problems, the most
frequent
> > causes of this are:
> >
> > 1. Old tape drives that don't have a logical end of tape marker (this is
not
> > likely to be the case except in drives manufactured more than 10 years
ago).
> >
> > 2. Poor tape driver implementation. This is the most common cause. Tape
> > driver writers often don't really know what they are doing. The driver
must
> > read the logical end of tape (this occurs before the physical end of the
> > tape) and must signal it to the program. In the Unix world most off brand
> > OSes do not signal the end of the tape. I won't mention their names other
> > than to say that Solaris, Linux, and I think FreeBSD, do so correctly.
> > Correctly signaling a logical end of tape means sending back a error
status
> > to the write with an errno == ENOSPC then allowing the program to continue
> > writing until the hardware end of tape.
> >
> > Alternatively, the OS can signal with an error status and errno == EIO and
> > continue to allow the program to write until the physical end of the tape.
> > This is *much* less correct since Bacula does not know if it is a real
error
> > condition or an end of tape. However, aside from the worrysome error
> > messages, the results are the same -- i.e. OK.
> >
> > The worst case is the OS signals an error status (errno = EIO) and does
not
> > allow the program to write to the physical end of the tape. This is a bad
> > situation, but Bacula should handle it. At least the data can be
recovered --
> > in most cases. The problem is when the WEOF fails, one cannot be sure
> > whether or not the tape is properly terminated, and there is a chance that
> > some restore operation may read off the end of the tape.
> >
> > 3. Since I think we are talking about Win32, it is possible that the low
level
> > system calls (via mscrt.dll or whatever the name of the Microsoft
> > compatibility layer we use) is not well written to return
reasonable/correct
> > statuses. This would be equivalent to poorly written Unix OS drivers I
> > mentioned above.
> >
> >
> >> brian-
> >>
> >> [EMAIL PROTECTED] wrote:
> >>
> >>> Can any one help us fix this problem ? (details below)
> >>>
> >>> Thank you
> >>>
> >>> Nawfel BERAICH
> >>> Casablanca 9h30 AM
> >>>
> >>> ----- Message d'origine ----
> >>> De : Brian Debelius <[EMAIL PROTECTED]>
> >>> À : [EMAIL PROTECTED]
> >>> Cc : bacula-users@lists.sourceforge.net
> >>> Envoyé le : Mardi, 27 Mars 2007, 14h15mn 51s
> >>> Objet : Re : [Bacula-users] Re : Windows::Permission denied
> >>>
> >>> You are not to the point to start backing up files yet. This needs to
> >>> be fixed first.
> >>>
> >>>
> >>> [EMAIL PROTECTED] wrote:
> >>>
> >>>> Is it that blocking ? I think that with this kind of error bacula
> >>>>
> >>> will start the Job and fail while trying to finish it (because it's an
> >>> I/O error) but my bacula dont start writing the jobs ! it always say
> >>> that there is an error and stop without spending any time in writing
> >>> files... :-( !
> >>>
> >>>> Thank you so much Brian for you precious help !
> >>>>
> >>>> ----- Message d'origine ----
> >>>> De : Brian Debelius <[EMAIL PROTECTED]>
> >>>> À : [EMAIL PROTECTED]
> >>>> Cc : bacula-users@lists.sourceforge.net
> >>>> Envoyé le : Mardi, 27 Mars 2007, 13h25mn 14s
> >>>> Objet : Re: Re : Re : Re : Re : [Bacula-users] Re :
> >>>>
> >>> Windows::Permission denied
> >>>
> >>>> Ok, you are now beyond my experience. Can someone help with fixing his
> >>>> EOF error?
> >>>>
> >>>> 26-Mar 18:35 btape: End of Volume "TestVolume1" at 148:13128 on device
> >>>> "HPStorag
> >>>> eTape0" (Tape0). Write of 64512 bytes got -1.
> >>>> 26-Mar 18:35 btape: btape Error: Error writing final EOF to tape. This
> >>>> Volume ma
> >>>> y not be readable.
> >>>> ../../stored/dev.c:1688 ioctl MTWEOF error on "HPStorageTape0" (Tape0).
> >>>> ERR=Inpu
> >>>> t/output error.
> >>>>
> >>>> brian-
> >>>>
> >>>>
> >> -------------------------------------------------------------------------
> >> Take Surveys. Earn Cash. Influence the Future of IT
> >> Join SourceForge.net's Techsay panel and you'll get the chance to share
your
> >> opinions on IT & business topics through brief surveys-and earn cash
> >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> >> _______________________________________________
> >> Bacula-users mailing list
> >> Bacula-users@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/bacula-users
> >>
> >>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur
Yahoo! Questions/Réponses
http://fr.answers.yahoo.com-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
