Please Help!
Bacula 1.38.2 on Linux RedHat.
During a bconsole restore a get this msg:
26-Mar 17:48 lis-backup-sd: Please mount Volume "UG2027L1" on Storage Device
"Drive-1" (/dev/nst0) for Job RestoreFiles.2007-03-26_17.47.15
Then I give the command mount storage= HP but the job ends with error.
The mount command is correct? If not which is the right form.
The required volume was loaded from autochanger (/dev/sg0) to the drive
(/dev/nst0)
Thanks for the help.
Rui Goncalves
BACULA-DIR.conf CONFIGURATION
Storage {
Name = "HP"
Maximum Concurrent Jobs = 4
Device = Drive-1 # must be same as Device in Storage
daemon
Media Type = DLT-8000
Address = lis-backup # N.B. Use a fully qualified name here
SDPort = 9103
Password = "XXXXXXX" # password for Storage daemon
AutoChanger = yes
}
BACULA-SD.CONF CONFUGURATION
Autochanger {
Name = Autochanger
Device = Drive-1
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg0
}
Device {
Name = Drive-1 #
Drive Index = 0
Media Type = DLT-8000
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
============== bconsole EXECUTION LOG
*restore
Using default Catalog name=MyCatalog DB=bacula
First you select one or more JobIds that contain files
to be restored. You will be presented several methods
of specifying the JobIds. Then you will be allowed to
select which files from those JobIds are to be restored.
To select the JobIds, you have the following choices:
1: List last 20 Jobs run
2: List Jobs where a given File is saved
3: Enter list of comma separated JobIds to select
4: Enter SQL list command
5: Select the most recent backup for a client
6: Select backup for a client before a specified time
7: Enter a list of files to restore
8: Enter a list of files to restore before a specified time
9: Find the JobIds of the most recent backup for a client
10: Find the JobIds for a backup for a client before a specified time
11: Enter a list of directories to restore for found JobIds
12: Cancel
Select item: (1-12): 3
Enter JobId(s), comma separated, to restore: 7235
You have selected the following JobId: 7235
Building directory tree for JobId 7235 ...
++++++++++++++++++++++++++++++++++++++++++++++++
1 Job, 7,650 files inserted into the tree.
You are now entering file selection mode where you add (mark) and
remove (unmark) files to be restored. No files are initially added, unless
you used the "all" keyword on the command line.
Enter "done" to leave this mode.
cwd is: /
$
$ ls
C:/
K:/
$ cd K:/
cwd is: K:/
$ ls
40abda4f950fb75ba5/
System Volume Information
$ mark *
3 files marked.
$ lsmark
*40abda4f950fb75ba5/
*%temp%dd_msxml_retMSI.txt
*System Volume Information
$
Bootstrap records written to
/var/bacula/working/lis-backup-dir.restore.*Console*.2007-03-26_17.42.12.bsr
The job will require the following Volumes:
UG2027L1
3 files selected to be restored.
Defined Clients:
1: lis-backup-fd
2: ffranco-fd
3: matou-fd
4: rg-fd
5: mail-fd
6: fileserver-fd
7: egtfilesrv-fd
8: lxdc-fd
9: clp-0937-fd
10: clp-0961-fd
11: proxy-fd
12: clp-0967-fd
13: lxmail-fd
14: printserver-fd
15: dezdc-fd
16: logtec-fd
17: owa-fd
18: mssql-fd
19: compta-vpn-fd
20: faxserver-fd
21: remedy-fd
22: dnsdominio-fd
23: smtp-fd
24: www-fd
25: websweeper-fd
26: clp-0915-fd
27: asterix-fd
28: cluster2-fd
29: cluster1-fd
30: clp1080-fd
31: clp1079-fd
Select the Client (1-31): 24
Run Restore job
JobName: RestoreFiles
Bootstrap:
/var/bacula/working/lis-backup-dir.restore.*Console*.2007-03-26_17.42.12.bsr
Where: /tmp/bacula-restores
Replace: always
FileSet: CatalogSet
Client: www-fd
Storage: HP
When: 2007-03-26 17:45:37
Catalog: MyCatalog
Priority: 10
OK to run? (yes/mod/no): mod
Parameters to modify:
1: Level
2: Storage
3: Job
4: FileSet
5: Client
6: When
7: Priority
8: Bootstrap
9: Where
10: Replace
11: JobId
Select parameter to modify (1-11): 9
Please enter path prefix for restore (/ for none): K:/
Run Restore job
JobName: RestoreFiles
Bootstrap:
/var/bacula/working/lis-backup-dir.restore.*Console*.2007-03-26_17.42.12.bsr
Where: K:/
Replace: always
FileSet: CatalogSet
Client: www-fd
Storage: HP
When: 2007-03-26 17:45:37
Catalog: MyCatalog
Priority: 10
OK to run? (yes/mod/no): yes
Job started. JobId=7342
*
You have messages.
*messages
26-Mar 17:47 lis-backup-dir: Start Restore Job RestoreFiles.2007-03-26_17.47.15
26-Mar 17:47 lis-backup-sd: 3301 Issuing autochanger "loaded drive 0" command.
26-Mar 17:47 lis-backup-sd: 3302 Autochanger "loaded drive 0", result: nothing
loaded.
26-Mar 17:47 lis-backup-sd: RestoreFiles.2007-03-26_17.47.15 Warning:
acquire.c:230 Couldn't rewind device "Drive-1" (/dev/nst0): ERR=dev.c:689
Rewind error on "Drive-1" (/dev/nst0). ERR=No medium found.
26-Mar 17:47 lis-backup-sd: 3301 Issuing autochanger "loaded drive 0" command.
26-Mar 17:47 lis-backup-sd: 3302 Autochanger "loaded drive 0", result: nothing
loaded.
26-Mar 17:47 lis-backup-sd: 3304 Issuing autochanger "load slot 1, drive 0"
command.
You have messages.
*messages
26-Mar 17:48 lis-backup-sd: 3305 Autochanger "load slot 1, drive 0", status is
OK.
26-Mar 17:48 lis-backup-sd: RestoreFiles.2007-03-26_17.47.15 Warning:
acquire.c:230 Couldn't rewind device "Drive-1" (/dev/nst0): ERR=dev.c:689
Rewind error on "Drive-1" (/dev/nst0). ERR=No medium found.
26-Mar 17:48 lis-backup-sd: Please mount Volume "UG2027L1" on Storage Device
"Drive-1" (/dev/nst0) for Job RestoreFiles.2007-03-26_17.47.15
*mount storage=HP
3001 OK mount. Device="Drive-1" (/dev/nst0)
You have messages.
*messages
26-Mar 17:49 lis-backup-sd: RestoreFiles.2007-03-26_17.47.15 Warning:
acquire.c:230 Couldn't rewind device "Drive-1" (/dev/nst0): ERR=dev.c:689
Rewind error on "Drive-1" (/dev/nst0). ERR=No medium found.
26-Mar 17:49 lis-backup-sd: 3301 Issuing autochanger "loaded drive 0" command.
26-Mar 17:49 lis-backup-sd: 3302 Autochanger "loaded drive 0", result is Slot 1.
26-Mar 17:49 lis-backup-sd: RestoreFiles.2007-03-26_17.47.15 Warning:
acquire.c:230 Couldn't rewind device "Drive-1" (/dev/nst0): ERR=dev.c:689
Rewind error on "Drive-1" (/dev/nst0). ERR=No medium found.
26-Mar 17:49 lis-backup-sd: Please mount Volume "UG2027L1" on Storage Device
"Drive-1" (/dev/nst0) for Job RestoreFiles.2007-03-26_17.47.15
================================STATUS STORAGE
*status
Status available for:
1: Director
2: Storage
3: Client
4: All
Select daemon type for status (1-4): 2
Automatically selected Storage: HP
Connecting to Storage daemon HP at lis-backup:9103
lis-backup-sd Version: 1.38.2 (20 November 2005) i686-pc-linux-gnu redhat
Daemon started 23-Mar-07 18:39, 20 Jobs run since started.
Running Jobs:
Full Restore job RestoreFiles JobId=7342 Volume="UG2027L1"
pool="Default" device=""Drive-1" (/dev/nst0)"
Files=0 Bytes=0 Bytes/sec=0
FDReadSeqNo=16 in_msg=15 out_msg=5 fd=7
====
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
======================================================================
7334 Incr 64 209,940,691 OK 25-Mar-07 18:00 cluster2
7332 Full 2,460,455 509,814,599,281 OK 25-Mar-07 18:24 clp-0915
7333 Full 1 1,846,453,253 OK 25-Mar-07 18:43 BackupCatalog
7335 Incr 39 232,405,418 OK 25-Mar-07 19:00 cluster1
7336 Full 1 1,846,381,557 OK 25-Mar-07 23:28 BackupCatalog
7337 Full 380 12,048,513,640 OK 26-Mar-07 04:22 cluster2
7338 Full 237 40,309,524,482 OK 26-Mar-07 05:58 cluster1
7339 0 0 Error 26-Mar-07 15:29 RestoreFiles
7340 0 0 Error 26-Mar-07 16:24 RestoreFiles
7341 0 0 Error 26-Mar-07 16:56 RestoreFiles
====
Device status:
Autochanger "Autochanger" with devices:
"Drive-1" (/dev/nst0)
Device "FileStorage" (/tmp) is not open or does not exist.
Device "Drive-1" (/dev/nst0) open but no Bacula volume is mounted.
Device is BLOCKED waiting for media.
Slot 1 is loaded in drive 0.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
====
In Use Volume status:
=========================END STATUS
*mount storage=HP
3001 OK mount. Device="Drive-1" (/dev/nst0)
You have messages.
*messages
26-Mar 17:53 lis-backup-sd: RestoreFiles.2007-03-26_17.47.15 Warning:
acquire.c:230 Couldn't rewind device "Drive-1" (/dev/nst0): ERR=dev.c:689
Rewind error on "Drive-1" (/dev/nst0). ERR=No medium found.
26-Mar 17:53 lis-backup-sd: 3301 Issuing autochanger "loaded drive 0" command.
26-Mar 17:53 lis-backup-sd: 3302 Autochanger "loaded drive 0", result is Slot 1.
26-Mar 17:53 lis-backup-sd: RestoreFiles.2007-03-26_17.47.15 Fatal error:
acquire.c:264 Too many errors trying to mount device "Drive-1" (/dev/nst0).
26-Mar 18:00 www-fd: RestoreFiles.2007-03-26_17.47.15 Fatal error:
../../filed/job.c:1752 Bad response to Read Data command. Wanted 3000 OK data
, got 3000 error
26-Mar 17:53 lis-backup-dir: RestoreFiles.2007-03-26_17.47.15 Error: Bacula
1.38.2 (20Nov05): 26-Mar-2007 17:53:27
JobId: 7342
Job: RestoreFiles.2007-03-26_17.47.15
Client: www-fd
Start time: 26-Mar-2007 17:47:17
End time: 26-Mar-2007 17:53:27
Files Expected: 3
Files Restored: 0
Bytes Restored: 0
Rate: 0.0 KB/s
FD Errors: 0
FD termination status: Error
SD termination status: Error
Termination: *** Restore Error ***
26-Mar 17:53 lis-backup-dir: Begin pruning Jobs.
26-Mar 17:53 lis-backup-dir: No Jobs found to prune.
26-Mar 17:53 lis-backup-dir: Begin pruning Files.
26-Mar 17:53 lis-backup-dir: No Files found to prune.
26-Mar 17:53 lis-backup-dir: End auto prune.
Rui Gonçalves
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
