-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Look for errors in that output. The one I saw is the inability to write
to /tmp/btape.state or something like that. I'd say you need to make
this not error before you try to do other things.
=R
[EMAIL PROTECTED] wrote:
> Ok ! done ! :-) this is what I could get from the command prompt ::
> (after some long time)
>
> Wrote blk_block=1045000, dev_blk_num=5500 VolBytes=67,414,975,488
> rate=13848.6 K
> B/s
> Wrote blk_block=1050000, dev_blk_num=10500 VolBytes=67,737,535,488
> rate=13857.9
> KB/s
> Wrote blk_block=1055000, dev_blk_num=15500 VolBytes=68,060,095,488
> rate=13867.2
> KB/s
> 17:54:54 Flush block, write EOF
> Wrote blk_block=1060000, dev_blk_num=4000 VolBytes=68,382,655,488
> rate=13845.4 K
> B/s
> Wrote blk_block=1065000, dev_blk_num=9000 VolBytes=68,705,215,488
> rate=13854.7 K
> B/s
> Wrote blk_block=1070000, dev_blk_num=14000 VolBytes=69,027,775,488
> rate=13863.8
> KB/s
> Wrote blk_block=1075000, dev_blk_num=3500 VolBytes=69,350,335,488
> rate=13845.1 K
> B/s
> Wrote blk_block=1080000, dev_blk_num=8500 VolBytes=69,672,895,488
> rate=13854.2 K
> B/s
> Wrote blk_block=1085000, dev_blk_num=13500 VolBytes=69,995,455,488
> rate=13863.2
> KB/s
> 17:57:23 Flush block, write EOF
> Wrote blk_block=1090000, dev_blk_num=2000 VolBytes=70,318,015,488
> rate=13842.1 K
> B/s
> Wrote blk_block=1095000, dev_blk_num=7000 VolBytes=70,640,575,488
> rate=13851.1 K
> B/s
> Wrote blk_block=1100000, dev_blk_num=12000 VolBytes=70,963,135,488
> rate=13860.0
> KB/s
> Wrote blk_block=1105000, dev_blk_num=1500 VolBytes=71,285,695,488
> rate=13855.3 K
> B/s
> Wrote blk_block=1110000, dev_blk_num=6500 VolBytes=71,608,255,488
> rate=13850.7 K
> B/s
> Wrote blk_block=1115000, dev_blk_num=11500 VolBytes=71,930,815,488
> rate=13859.5
> KB/s
> Wrote blk_block=1120000, dev_blk_num=1000 VolBytes=72,253,375,488
> rate=13854.9 K
> B/s
> 17:59:52 Flush block, write EOF
> Wrote blk_block=1125000, dev_blk_num=5000 VolBytes=72,575,935,488
> rate=13847.7 K
> B/s
> Wrote blk_block=1130000, dev_blk_num=10000 VolBytes=72,898,495,488
> rate=13856.4
> KB/s
> Wrote blk_block=1135000, dev_blk_num=15000 VolBytes=73,221,055,488
> rate=13865.0
> KB/s
> Wrote blk_block=1140000, dev_blk_num=4500 VolBytes=73,543,615,488
> rate=13860.5 K
> B/s
> Wrote blk_block=1145000, dev_blk_num=9500 VolBytes=73,866,175,488
> rate=13856.0 K
> B/s
> Wrote blk_block=1150000, dev_blk_num=14500 VolBytes=74,188,735,488
> rate=13864.5
> KB/s
> 18:02:21 Flush block, write EOF
> Wrote blk_block=1155000, dev_blk_num=3000 VolBytes=74,511,295,488
> rate=13844.5 K
> B/s
> Wrote blk_block=1160000, dev_blk_num=8000 VolBytes=74,833,855,488
> rate=13853.0 K
> B/s
> Wrote blk_block=1165000, dev_blk_num=13000 VolBytes=75,156,415,488
> rate=13861.4
> KB/s
> Wrote blk_block=1170000, dev_blk_num=2500 VolBytes=75,478,975,488
> rate=13857.0 K
> B/s
> Wrote blk_block=1175000, dev_blk_num=7500 VolBytes=75,801,535,488
> rate=13852.6 K
> B/s
> Wrote blk_block=1180000, dev_blk_num=12500 VolBytes=76,124,095,488
> rate=13858.4
> KB/s
> 18:04:51 Flush block, write EOF
> Wrote blk_block=1185000, dev_blk_num=1000 VolBytes=76,446,655,488
> rate=13841.5 K
> B/s
> Wrote blk_block=1190000, dev_blk_num=6000 VolBytes=76,769,215,488
> rate=13849.8 K
> B/s
> Wrote blk_block=1195000, dev_blk_num=11000 VolBytes=77,091,775,488
> rate=13858.0
> KB/s
> Wrote blk_block=1200000, dev_blk_num=500 VolBytes=77,414,335,488
> rate=13861.1 KB
> /s
> Wrote blk_block=1205000, dev_blk_num=5500 VolBytes=77,736,895,488
> rate=13861.8 K
> B/s
> Wrote blk_block=1210000, dev_blk_num=10500 VolBytes=78,059,455,488
> rate=13857.5
> KB/s
> Wrote blk_block=1215000, dev_blk_num=15500 VolBytes=78,382,015,488
> rate=13865.6
> KB/s
> 18:07:20 Flush block, write EOF
> Wrote blk_block=1220000, dev_blk_num=4000 VolBytes=78,704,575,488
> rate=13846.7 K
> B/s
> Wrote blk_block=1225000, dev_blk_num=9000 VolBytes=79,027,135,488
> rate=13854.7 K
> B/s
> Wrote blk_block=1230000, dev_blk_num=14000 VolBytes=79,349,695,488
> rate=13862.6
> KB/s
> Wrote blk_block=1235000, dev_blk_num=3500 VolBytes=79,672,255,488
> rate=13856.0 K
> B/s
> Wrote blk_block=1240000, dev_blk_num=8500 VolBytes=79,994,815,488
> rate=13863.9 K
> B/s
> Wrote blk_block=1245000, dev_blk_num=13500 VolBytes=80,317,375,488
> rate=13859.8
> KB/s
> 18:09:49 Flush block, write EOF
> Wrote blk_block=1250000, dev_blk_num=2000 VolBytes=80,639,935,488
> rate=13843.8 K
> B/s
> Wrote blk_block=1255000, dev_blk_num=7000 VolBytes=80,962,495,488
> rate=13851.6 K
> B/s
> Wrote blk_block=1260000, dev_blk_num=12000 VolBytes=81,285,055,488
> rate=13859.3
> KB/s
> Wrote blk_block=1265000, dev_blk_num=1500 VolBytes=81,607,615,488
> rate=13852.9 K
> B/s
> Wrote blk_block=1270000, dev_blk_num=6500 VolBytes=81,930,175,488
> rate=13860.6 K
> B/s
> Wrote blk_block=1275000, dev_blk_num=11500 VolBytes=82,252,735,488
> rate=13868.3
> KB/s
> Wrote blk_block=1280000, dev_blk_num=1000 VolBytes=82,575,295,488
> rate=13852.6 K
> B/s
> 18:12:18 Flush block, write EOF
> Wrote blk_block=1285000, dev_blk_num=5000 VolBytes=82,897,855,488
> rate=13848.6 K
> B/s
> Wrote blk_block=1290000, dev_blk_num=10000 VolBytes=83,220,415,488
> rate=13856.2
> KB/s
> Wrote blk_block=1295000, dev_blk_num=15000 VolBytes=83,542,975,488
> rate=13863.8
> KB/s
> Wrote blk_block=1300000, dev_blk_num=4500 VolBytes=83,865,535,488
> rate=13857.5 K
> B/s
> Wrote blk_block=1305000, dev_blk_num=9500 VolBytes=84,188,095,488
> rate=13865.0 K
> B/s
> Wrote blk_block=1310000, dev_blk_num=14500 VolBytes=84,510,655,488
> rate=13872.4
> KB/s
> 18:14:42 Flush block, write EOF
> Wrote blk_block=1315000, dev_blk_num=3000 VolBytes=84,833,215,488
> rate=13845.8 K
> B/s
> Wrote blk_block=1320000, dev_blk_num=8000 VolBytes=85,155,775,488
> rate=13853.2 K
> B/s
> Wrote blk_block=1325000, dev_blk_num=13000 VolBytes=85,478,335,488
> rate=13860.6
> KB/s
> Wrote blk_block=1330000, dev_blk_num=2500 VolBytes=85,800,895,488
> rate=13856.7 K
> B/s
> Wrote blk_block=1335000, dev_blk_num=7500 VolBytes=86,123,455,488
> rate=13864.0 K
> B/s
> Wrote blk_block=1340000, dev_blk_num=12500 VolBytes=86,446,015,488
> rate=13871.3
> KB/s
> 18:17:10 Flush block, write EOF
> Wrote blk_block=1345000, dev_blk_num=1000 VolBytes=86,768,575,488
> rate=13854.2 K
> B/s
> Wrote blk_block=1350000, dev_blk_num=6000 VolBytes=87,091,135,488
> rate=13850.4 K
> B/s
> Wrote blk_block=1355000, dev_blk_num=11000 VolBytes=87,413,695,488
> rate=13857.6
> KB/s
> Wrote blk_block=1360000, dev_blk_num=500 VolBytes=87,736,255,488
> rate=13862.6 KB
> /s
> Wrote blk_block=1365000, dev_blk_num=5500 VolBytes=88,058,815,488
> rate=13861.0 K
> B/s
> Wrote blk_block=1370000, dev_blk_num=10500 VolBytes=88,381,375,488
> rate=13868.1
> KB/s
> Wrote blk_block=1375000, dev_blk_num=15500 VolBytes=88,703,935,488
> rate=13875.2
> KB/s
> 18:19:39 Flush block, write EOF
> Wrote blk_block=1380000, dev_blk_num=4000 VolBytes=89,026,495,488
> rate=13858.4 K
> B/s
> Wrote blk_block=1385000, dev_blk_num=9000 VolBytes=89,349,055,488
> rate=13854.7 K
> B/s
> Wrote blk_block=1390000, dev_blk_num=14000 VolBytes=89,671,615,488
> rate=13861.7
> KB/s
> Wrote blk_block=1395000, dev_blk_num=3500 VolBytes=89,994,175,488
> rate=13858.0 K
> B/s
> Wrote blk_block=1400000, dev_blk_num=8500 VolBytes=90,316,735,488
> rate=13865.0 K
> B/s
> Wrote blk_block=1405000, dev_blk_num=13500 VolBytes=90,639,295,488
> rate=13871.9
> KB/s
> 18:22:09 Flush block, write EOF
> Wrote blk_block=1410000, dev_blk_num=2000 VolBytes=90,961,855,488
> rate=13855.6 K
> B/s
> Wrote blk_block=1415000, dev_blk_num=7000 VolBytes=91,284,415,488
> rate=13862.5 K
> B/s
> Wrote blk_block=1420000, dev_blk_num=12000 VolBytes=91,606,975,488
> rate=13858.8
> KB/s
> Wrote blk_block=1425000, dev_blk_num=1500 VolBytes=91,929,535,488
> rate=13855.2 K
> B/s
> Wrote blk_block=1430000, dev_blk_num=6500 VolBytes=92,252,095,488
> rate=13862.1 K
> B/s
> Wrote blk_block=1435000, dev_blk_num=11500 VolBytes=92,574,655,488
> rate=13868.9
> KB/s
> Wrote blk_block=1440000, dev_blk_num=1000 VolBytes=92,897,215,488
> rate=13863.2 K
> B/s
> 18:24:38 Flush block, write EOF
> Wrote blk_block=1445000, dev_blk_num=5000 VolBytes=93,219,775,488
> rate=13859.6 K
> B/s
> Wrote blk_block=1450000, dev_blk_num=10000 VolBytes=93,542,335,488
> rate=13866.3
> KB/s
> Wrote blk_block=1455000, dev_blk_num=15000 VolBytes=93,864,895,488
> rate=13862.8
> KB/s
> Wrote blk_block=1460000, dev_blk_num=4500 VolBytes=94,187,455,488
> rate=13859.2 K
> B/s
> Wrote blk_block=1465000, dev_blk_num=9500 VolBytes=94,510,015,488
> rate=13865.9 K
> B/s
> Wrote blk_block=1470000, dev_blk_num=14500 VolBytes=94,832,575,488
> rate=13872.5
> KB/s
> 18:27:07 Flush block, write EOF
> Wrote blk_block=1475000, dev_blk_num=3000 VolBytes=95,155,135,488
> rate=13856.9 K
> B/s
> Wrote blk_block=1480000, dev_blk_num=8000 VolBytes=95,477,695,488
> rate=13863.5 K
> B/s
> Wrote blk_block=1485000, dev_blk_num=13000 VolBytes=95,800,255,488
> rate=13870.0
> KB/s
> Wrote blk_block=1490000, dev_blk_num=2500 VolBytes=96,122,815,488
> rate=13856.5 K
> B/s
> Wrote blk_block=1495000, dev_blk_num=7500 VolBytes=96,445,375,488
> rate=13863.1 K
> B/s
> Wrote blk_block=1500000, dev_blk_num=12500 VolBytes=96,767,935,488
> rate=13869.6
> KB/s
> 18:29:36 Flush block, write EOF
> Wrote blk_block=1505000, dev_blk_num=1000 VolBytes=97,090,495,488
> rate=13854.2 K
> B/s
> Wrote blk_block=1510000, dev_blk_num=6000 VolBytes=97,413,055,488
> rate=13860.7 K
> B/s
> Wrote blk_block=1515000, dev_blk_num=11000 VolBytes=97,735,615,488
> rate=13867.1
> KB/s
> Wrote blk_block=1520000, dev_blk_num=500 VolBytes=98,058,175,488
> rate=13855.9 KB
> /s
> Wrote blk_block=1525000, dev_blk_num=5500 VolBytes=98,380,735,488
> rate=13856.4 K
> B/s
> Wrote blk_block=1530000, dev_blk_num=10500 VolBytes=98,703,295,488
> rate=13862.8
> KB/s
> Wrote blk_block=1535000, dev_blk_num=15500 VolBytes=99,025,855,488
> rate=13869.2
> KB/s
> 18:32:06 Flush block, write EOF
> Wrote blk_block=1540000, dev_blk_num=4000 VolBytes=99,348,415,488
> rate=13856.1 K
> B/s
> Wrote blk_block=1545000, dev_blk_num=9000 VolBytes=99,670,975,488
> rate=13862.4 K
> B/s
> Wrote blk_block=1550000, dev_blk_num=14000 VolBytes=99,993,535,488
> rate=13868.7
> KB/s
> Wrote blk_block=1555000, dev_blk_num=3500 VolBytes=100,316,095,488
> rate=13855.8
> KB/s
> Wrote blk_block=1560000, dev_blk_num=8500 VolBytes=100,638,655,488
> rate=13862.1
> KB/s
> Wrote blk_block=1565000, dev_blk_num=13500 VolBytes=100,961,215,488
> rate=13868.3
> KB/s
> 18:34:35 Flush block, write EOF
> Wrote blk_block=1570000, dev_blk_num=2000 VolBytes=101,283,775,488
> rate=13853.6
> KB/s
> Wrote blk_block=1575000, dev_blk_num=7000 VolBytes=101,606,335,488
> rate=13859.8
> KB/s
> Wrote blk_block=1580000, dev_blk_num=12000 VolBytes=101,928,895,488
> rate=13866.0
> KB/s
> 26-Mar 18:35 btape: End of Volume "TestVolume1" at 148:13128 on device
> "HPStorag
> eTape0" (Tape0). Write of 64512 bytes got -1.
> 26-Mar 18:35 btape: btape Error: Error writing final EOF to tape. This
> Volume ma
> y not be readable.
> ../../stored/dev.c:1688 ioctl MTWEOF error on "HPStorageTape0" (Tape0).
> ERR=Inpu
> t/output error.
> btape: ../../stored/btape.c:2343 Last block at: 148:13127
> this_dev_block_num=131
> 28
> btape: ../../stored/btape.c:2377 End of tape 148:13128.
> VolumeCapacity=102,001,6
> 65,024. Write rate = 13860.8 KB/s
> 26-Mar 18:35 btape: End of medium on Volume "TestVolume1"
> Bytes=102,001,665,024
> Blocks=1,581,127 at 26-Mar-2007 18:35.
> 26-Mar 18:35 btape: 3301 Issuing autochanger "loaded? drive 0" command.
> 26-Mar 18:35 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
> 26-Mar 18:35 btape: 3307 Issuing autochanger "unload slot 1, drive 0"
> command.
> 26-Mar 18:36 btape: 3304 Issuing autochanger "load slot 2, drive 0" command.
> 26-Mar 18:37 btape: 3305 Autochanger "load slot 2, drive 0", status is OK.
> 26-Mar 18:37 btape: 3301 Issuing autochanger "loaded? drive 0" command.
> 26-Mar 18:37 btape: 3302 Autochanger "loaded? drive 0", result is Slot 2.
> 26-Mar 18:37 btape: Fatal Error at ../../stored/dev.c:1670 because:
> ../../stored/dev.c:1669 Attempt to WEOF on non-appendable Volume
> 26-Mar 18:37 btape: 3301 Issuing autochanger "loaded? drive 0" command.
> 26-Mar 18:37 btape: 3302 Autochanger "loaded? drive 0", result is Slot 2.
> Wrote Volume label for volume "TestVolume2".
> 26-Mar 18:37 btape: Wrote label to prelabeled Volume "TestVolume2" on
> device "HP
> StorageTape0" (Tape0)
> 26-Mar 18:37 btape: New volume "TestVolume2" mounted on device
> "HPStorageTape0"
> (Tape0) at 26-Mar-2007 18:37.
> Done writing 0 records ...
> Wrote End of Session label.
> Could not create state file: /tmp/btape.state ERR=No such file or directory
>
>
> 18:37:51 Done filling tapes at 0:13. Now beginning re-read of first tape ...
> 26-Mar 18:37 btape: 3307 Issuing autochanger "unload slot 2, drive 0"
> command.
> 26-Mar 18:38 btape: 3304 Issuing autochanger "load slot 1, drive 0" command.
> 26-Mar 18:39 btape: 3305 Autochanger "load slot 1, drive 0", status is OK.
> 26-Mar 18:39 btape: 3301 Issuing autochanger "loaded? drive 0" command.
> 26-Mar 18:39 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
> 26-Mar 18:39 btape: Ready to read from volume "TestVolume1" on device
> "HPStorage
> Tape0" (Tape0).
> Rewinding.
> Reading the first 10000 records from 0:0.
> 10000 records read now at 1:5084
> Reposition from 1:5084 to 148:13127
> Reading block 13127.
>
> The last block of the first tape matches.
>
> 26-Mar 21:24 btape: 3307 Issuing autochanger "unload slot 1, drive 0"
> command.
> 26-Mar 21:25 btape: 3304 Issuing autochanger "load slot 2, drive 0" command.
> 26-Mar 21:25 btape: 3305 Autochanger "load slot 2, drive 0", status is OK.
> 26-Mar 21:25 btape: 3301 Issuing autochanger "loaded? drive 0" command.
> 26-Mar 21:25 btape: 3302 Autochanger "loaded? drive 0", result is Slot 2.
> 26-Mar 21:26 btape: Ready to read from volume "TestVolume2" on device
> "HPStorage
> Tape0" (Tape0).
> Reposition from 0:0 to 0:1
> Reading block 1.
>
> The first block on the second tape matches.
>
> Reposition from 0:2 to 0:11
> Reading block 11.
>
> The last block on the second tape matches. Test succeeded.
>
> *
>
>
>
> So.. ? ;-)
>
> ----- Message d'origine ----
> De : Brian Debelius <[EMAIL PROTECTED]>
> À : [EMAIL PROTECTED]
> Cc : bacula-users@lists.sourceforge.net
> Envoyé le : Lundi, 26 Mars 2007, 16h24mn 28s
> Objet : Re: Re : Re : Re : [Bacula-users] Re : Windows::Permission denied
>
> Next run btape again except enter 'fill' at the prompt
>
> [EMAIL PROTECTED] wrote:
>> Great ! It seems like it's working :
>>
>>
>> C:\Program Files\Bacula\bin>mt -f Tape0 setblk 0
>>
>> C:\Program Files\Bacula\bin>btape -c "C:\Documents and Settings\All
>> Users\Applic
>> ation Data\Bacula\bacula-sd.conf" Tape0
>> Tape block granularity is 1024 bytes.
>> btape: ../../stored/butil.c:286 Using device: "Tape0" for writing.
>> 26-Mar 15:51 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>> 26-Mar 15:51 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
>> 26-Mar 15:51 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>> 26-Mar 15:51 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
>> btape: ../../stored/btape.c:368 open device "HPStorageTape0" (Tape0): OK
>> *test
>>
>> === Write, rewind, and re-read test ===
>>
>> I'm going to write 1000 records and an EOF
>> then write 1000 records and an EOF, then rewind,
>> and re-read the data to verify that it is correct.
>>
>> This is an *essential* feature ...
>>
>> btape: ../../stored/btape.c:825 Wrote 1000 blocks of 64412 bytes.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:841 Wrote 1000 blocks of 64412 bytes.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:850 Rewind OK.
>> 1000 blocks re-read correctly.
>> Got EOF on tape.
>> 1000 blocks re-read correctly.
>> === Test Succeeded. End Write, rewind, and re-read test ===
>>
>>
>> === Write, rewind, and position test ===
>>
>> I'm going to write 1000 records and an EOF
>> then write 1000 records and an EOF, then rewind,
>> and position to a few blocks and verify that it is correct.
>>
>> This is an *essential* feature ...
>>
>> btape: ../../stored/btape.c:937 Wrote 1000 blocks of 64412 bytes.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:953 Wrote 1000 blocks of 64412 bytes.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:962 Rewind OK.
>> Reposition to file:block 0:4
>> Block 5 re-read correctly.
>> Reposition to file:block 0:200
>> Block 201 re-read correctly.
>> Reposition to file:block 0:999
>> Block 1000 re-read correctly.
>> Reposition to file:block 1:0
>> Block 1001 re-read correctly.
>> Reposition to file:block 1:600
>> Block 1601 re-read correctly.
>> Reposition to file:block 1:999
>> Block 2000 re-read correctly.
>> === Test Succeeded. End Write, rewind, and re-read test ===
>>
>>
>>
>> === Append files test ===
>>
>> This test is essential to Bacula.
>>
>> I'm going to write one record in file 0,
>> two records in file 1,
>> and three records in file 2
>>
>> btape: ../../stored/btape.c:469 Rewound "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> 26-Mar 15:52 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>> 26-Mar 15:52 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
>> btape: ../../stored/btape.c:368 open device "HPStorageTape0" (Tape0): OK
>> btape: ../../stored/btape.c:469 Rewound "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1091 Now moving to end of medium.
>> btape: ../../stored/btape.c:520 Moved to end of medium.
>> We should be in file 3. I am at file 3. This is correct!
>>
>> Now the important part, I am going to attempt to append to the tape.
>>
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:469 Rewound "HPStorageTape0" (Tape0)
>> Done appending, there should be no I/O errors
>>
>> Doing Bacula scan of blocks:
>> 1 block of 64448 bytes in file 1
>> End of File mark.
>> 2 blocks of 64448 bytes in file 2
>> End of File mark.
>> 3 blocks of 64448 bytes in file 3
>> End of File mark.
>> 1 block of 64448 bytes in file 4
>> End of File mark.
>> Total files=4, blocks=7, bytes = 451,136
>> End scanning the tape.
>> We should be in file 4. I am at file 4. This is correct!
>>
>> The above Bacula scan should have output identical to what follows.
>> Please double check it ...
>> === Sample correct output ===
>> 1 block of 64448 bytes in file 1
>> End of File mark.
>> 2 blocks of 64448 bytes in file 2
>> End of File mark.
>> 3 blocks of 64448 bytes in file 3
>> End of File mark.
>> 1 block of 64448 bytes in file 4
>> End of File mark.
>> Total files=4, blocks=7, bytes = 451,136
>> === End sample correct output ===
>>
>> If the above scan output is not identical to the
>> sample output, you MUST correct the problem
>> or Bacula will not be able to write multiple Jobs to
>> the tape.
>>
>>
>> === Write, backup, and re-read test ===
>>
>> I'm going to write three records and an EOF
>> then backup over the EOF and re-read the last record.
>> Bacula does this after writing the last block on the
>> tape to verify that the block was written correctly.
>>
>> This is not an *essential* feature ...
>>
>> btape: ../../stored/btape.c:469 Rewound "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:704 Wrote first record of 64412 bytes.
>> btape: ../../stored/btape.c:715 Wrote second record of 64412 bytes.
>> btape: ../../stored/btape.c:726 Wrote third record of 64412 bytes.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:742 Backspaced over EOF OK.
>> btape: ../../stored/btape.c:747 Backspace record OK.
>> btape: ../../stored/btape.c:765
>> Block re-read correct. Test succeeded!
>> === End Write, backup, and re-read test ===
>>
>>
>>
>> === Forward space files test ===
>>
>> This test is essential to Bacula.
>>
>> I'm going to write five files then test forward spacing
>>
>> btape: ../../stored/btape.c:469 Rewound "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1571 Wrote one record of 64412 bytes.
>> btape: ../../stored/btape.c:1573 Wrote block to device.
>> btape: ../../stored/btape.c:499 Wrote 1 EOF to "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:469 Rewound "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1305 Now forward spacing 1 file.
>> We should be in file 1. I am at file 1. This is correct!
>> btape: ../../stored/btape.c:1317 Now forward spacing 2 files.
>> We should be in file 3. I am at file 3. This is correct!
>> btape: ../../stored/btape.c:469 Rewound "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1330 Now forward spacing 4 files.
>> We should be in file 4. I am at file 4. This is correct!
>>
>> btape: ../../stored/btape.c:1348 Now forward spacing 1 more file.
>> We should be in file 5. I am at file 5. This is correct!
>>
>> === End Forward space files test ===
>>
>>
>> Ah, I see you have an autochanger configured.
>> To test the autochanger you must have a blank tape
>> that I can write on in Slot 1.
>>
>> Do you wish to continue with the Autochanger test? (y/n): y
>>
>>
>> === Autochanger test ===
>>
>> 3301 Issuing autochanger "loaded" command.
>> Slot 1 loaded. I am going to unload it.
>> 3302 Issuing autochanger "unload 1 0" command.
>> unload status=OK 0
>> 3303 Issuing autochanger "load 1 0" command.
>> 3303 Autochanger "load 1 0" status is OK.
>> 26-Mar 15:55 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>> 26-Mar 15:55 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
>> btape: ../../stored/btape.c:368 open device "HPStorageTape0" (Tape0): OK
>> btape: ../../stored/btape.c:1235 Rewound "HPStorageTape0" (Tape0)
>> btape: ../../stored/btape.c:1242 Wrote EOF to "HPStorageTape0" (Tape0)
>>
>> The test autochanger worked!!
>>
>> *
>>
>> Euuh.. ! What I have to do now.. ?
>>
>> Nawfel
>>
>> ----- Message d'origine ----
>> De : Brian Debelius <[EMAIL PROTECTED]>
>> À : [EMAIL PROTECTED]
>> Cc : bacula-users@lists.sourceforge.net
>> Envoyé le : Lundi, 26 Mars 2007, 15h44mn 34s
>> Objet : Re: Re : Re : [Bacula-users] Re : Windows::Permission denied
>>
>> run this
>> mt -f Tape0 setblk 0
>>
>> then run btape again.
>>
>> [EMAIL PROTECTED] wrote:
>> > I've commented the min and max lines.. ran the btape command but I
>> > think there is a problem :
>> >
>> > C:\Program Files\Bacula\bin>btape -c "C:\Documents and Settings\All
>> > Users\Applic
>> > ation Data\Bacula\bacula-sd.conf" Tape0
>> > Tape block granularity is 1024 bytes.
>> > btape: ../../stored/butil.c:286 Using device: "Tape0" for writing.
>> > 26-Mar 15:33 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>> > 26-Mar 15:33 btape: 3302 Autochanger "loaded? drive 0", result is
>> Slot 1.
>> > 26-Mar 15:33 btape: 3301 Issuing autochanger "loaded? drive 0" command.
>> > 26-Mar 15:33 btape: 3302 Autochanger "loaded? drive 0", result is
>> Slot 1.
>> > btape: ../../stored/btape.c:368 open device "HPStorageTape0" (Tape0): OK
>> > *test
>> >
>> > === Write, rewind, and re-read test ===
>> >
>> > I'm going to write 1000 records and an EOF
>> > then write 1000 records and an EOF, then rewind,
>> > and re-read the data to verify that it is correct.
>> >
>> > This is an *essential* feature ...
>> >
>> > 26-Mar 15:33 btape: btape Error: ../../stored/block.c:569 Write error
>> > at 0:0 on
>> > device "HPStorageTape0" (Tape0). ERR=Input/output error.
>> > 26-Mar 15:33 btape: btape Error: Backspace record at EOT failed.
>> > ERR=Input/outpu
>> > t error
>> > btape: ../../stored/btape.c:821 Error writing block to device.
>> > *
>> >
>> >
>> > ----- Message d'origine ----
>> > De : Brian Debelius <[EMAIL PROTECTED]>
>> > À : [EMAIL PROTECTED]
>> > Cc : bacula-users@lists.sourceforge.net
>> > Envoyé le : Lundi, 26 Mars 2007, 15h23mn 38s
>> > Objet : Re: Re : [Bacula-users] Re : Windows::Permission denied
>> >
>> > Nawfel, you are getting ahead of yourself. Try taking out the min and
>> > max like kern suggested.
>> >
>> > after you make the changes, load a tape into Tape0
>> > goto your bacula program directory and run
>> > btape -c "c:\program files\all users\application
>> > data\bacula\bacula-sd.conf" Tape0
>> > enter 'test' at the prompt
>> >
>> >
>> > [EMAIL PROTECTED] wrote:
>> > > with or without the Min/Max block size params I get the following
>> > > message :
>> > >
>> > > ilemma009-sd Version: 2.0.3 (06 March 2007) Linux Cross-compile Win32
>> > > Daemon started 26-Mar-07 15:08, 1 Job run since started.
>> > > Heap: bytes=18,066 max_bytes=114,757 bufs=80 max_bufs=93
>> > >
>> > > Running Jobs:
>> > > No Jobs running.
>> > > ====
>> > >
>> > > Jobs waiting to reserve a drive:
>> > > ====
>> > >
>> > > Terminated Jobs:
>> > > JobId Level Files Bytes Status Finished Name
>> > > ===================================================================
>> > > 22 Full 0 0 Error 26-Mar-07 15:04 Client1
>> > > 24 Full 0 0 Error 26-Mar-07 15:10 Client1
>> > > ====
>> > >
>> > > Device status:
>> > > Autochanger "HPStorageAutochanger" with devices:
>> > > "HPStorageTape0" (Tape0)
>> > > "HPStorageTape1" (Tape1)
>> > > Device "HPStorageTape0" (Tape0) is not open.
>> > > Slot 1 is loaded in drive 0.
>> > > Device "HPStorageTape1" (Tape1) is not open.
>> > > Drive 1 status unknown.
>> > > ====
>> > >
>> > > In Use Volume status:
>> > > ====
>> > >
>> > >
>> > > when I type "messages " in the bconsole I get the following : (sorry
>> > > for the lenth ! and thank you for your interest)
>> > >
>> > > 23-Mar 03:03 ilemma009-sd: Job Client1.2007-03-23_02.03.00 waiting.
>> > > Cannot find
>> > > any appendable volumes.
>> > > Please use the "label" command to create a new Volume for:
>> > > Storage: "HPStorageTape0" (Tape0)
>> > > Media type: damnedHPUltriumTape
>> > > Pool: Default
>> > > 23-Mar 03:03 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
>> > > ../../lib/message
>> > > .c:713 Operator mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Intervention needed for Client1.2007-03-23_02.03.00"
>> > > Administrato
>> > > r
>> > > ERR=Unknown error
>> > > 23-Mar 05:03 ilemma009-sd: Job Client1.2007-03-23_02.03.00 waiting.
>> > > Cannot find
>> > > any appendable volumes.
>> > > Please use the "label" command to create a new Volume for:
>> > > Storage: "HPStorageTape0" (Tape0)
>> > > Media type: damnedHPUltriumTape
>> > > Pool: Default
>> > > 23-Mar 05:03 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
>> > > ../../lib/message
>> > > .c:713 Operator mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Intervention needed for Client1.2007-03-23_02.03.00"
>> > > Administrato
>> > > r
>> > > ERR=Unknown error
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
>> > > Network err
>> > > or with FD during Backup: ERR=Broken pipe
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
>> > > No Job stat
>> > > us returned from FD.
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
>> > > ../../cats/sql_up
>> > > date.c:194 ../../cats/sql_update.c:194 update UPDATE Job SET
>> > > JobStatus='f',EndTi
>> > > me='2007-03-23
>> > > 18:32:37',ClientId=1,JobBytes=0,JobFiles=0,JobErrors=3,VolSession
>> > >
>> >
>>
> Id=1,VolSessionTime=1174650862,PoolId=1,FileSetId=1,JobTDate=1174674757,RealEndT
>> > > ime='2007-03-23 18:32:37',PriorJobId=0 WHERE JobId=20 failed:
>> > > Can't connect to MySQL server on 'localhost' (10061)
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
>> > > updating
>> > > job record. ../../cats/sql_update.c:194 update UPDATE Job SET
>> > > JobStatus='f',EndT
>> > > ime='2007-03-23
>> > > 18:32:37',ClientId=1,JobBytes=0,JobFiles=0,JobErrors=3,VolSessio
>> > >
>> >
>>
> nId=1,VolSessionTime=1174650862,PoolId=1,FileSetId=1,JobTDate=1174674757,RealEnd
>> > > Time='2007-03-23 18:32:37',PriorJobId=0 WHERE JobId=20 failed:
>> > > Can't connect to MySQL server on 'localhost' (10061)
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
>> > > ../../cats/
>> > > sql_get.c:288 ../../cats/sql_get.c:288 query SELECT
>> > > VolSessionId,VolSessionTime,
>> > >
>> >
>>
> PoolId,StartTime,EndTime,JobFiles,JobBytes,JobTDate,Job,JobStatus,Type,Level,Cli
>> > > entId,Name,PriorJobId,RealEndTime,JobId FROM Job WHERE JobId=20
>> failed:
>> > > Can't connect to MySQL server on 'localhost' (10061)
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
>> > > getting j
>> > > ob record for stats: ../../cats/sql_get.c:288 query SELECT
>> > > VolSessionId,VolSessi
>> > >
>> >
>>
> onTime,PoolId,StartTime,EndTime,JobFiles,JobBytes,JobTDate,Job,JobStatus,Type,Le
>> > > vel,ClientId,Name,PriorJobId,RealEndTime,JobId FROM Job WHERE JobId=20
>> > > failed:
>> > > Can't connect to MySQL server on 'localhost' (10061)
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
>> > > ../../cats/
>> > > sql_get.c:663 ../../cats/sql_get.c:663 query SELECT
>> > > ClientId,Name,Uname,AutoPrun
>> > > e,FileRetention,JobRetention FROM Client WHERE
>> > > Client.Name='ilemma009-fd' failed
>> > > :
>> > > Can't connect to MySQL server on 'localhost' (10061)
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
>> > > getting c
>> > > lient record for stats: Client record not found in Catalog.
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
>> > > ../../cats/
>> > > sql.c:233 ../../cats/sql.c:233 query SELECT count(*) from Media
>> failed:
>> > > Can't connect to MySQL server on 'localhost' (10061)
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
>> > > ../../cats/
>> > > sql_get.c:351 ../../cats/sql_get.c:351 query SELECT
>> > > VolumeName,MAX(VolIndex) FRO
>> > > M JobMedia,Media WHERE JobMedia.JobId=20 AND
>> > > JobMedia.MediaId=Media.MediaId GROU
>> > > P BY VolumeName ORDER BY 2 ASC failed:
>> > > Can't connect to MySQL server on 'localhost' (10061)
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error: Bacula
>> > > 2.0.3 (06M
>> > > ar07): 23-Mar-2007 18:32:37
>> > > JobId: 20
>> > > Job: Client1.2007-03-23_02.03.00
>> > > Backup Level: Full
>> > > Client: "ilemma009-fd"
>> > > FileSet: "Test Set" 2007-03-08 23:05:00
>> > > Pool: "Default" (From Job resource)
>> > > Storage: "HPTape" (From Job resource)
>> > > Scheduled time: 23-Mar-2007 02:03:00
>> > > Start time: 23-Mar-2007 02:03:03
>> > > End time: 23-Mar-2007 18:32:37
>> > > Elapsed time: 16 hours 29 mins 34 secs
>> > > Priority: 10
>> > > FD Files Written: 0
>> > > SD Files Written: 0
>> > > FD Bytes Written: 0 (0 B)
>> > > SD Bytes Written: 0 (0 B)
>> > > Rate: 0.0 KB/s
>> > > Software Compression: None
>> > > VSS: no
>> > > Encryption: no
>> > > Volume name(s):
>> > > Volume Session Id: 1
>> > > Volume Session Time: 1174650862
>> > > Last Volume Bytes: 0 (0 B)
>> > > Non-fatal FD errors: 4
>> > > SD Errors: 0
>> > > FD termination status: Error
>> > > SD termination status: Error
>> > > Termination: *** Backup Error ***
>> > >
>> > > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
>> > > ../../lib/message
>> > > .c:492 Mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
>> > > ERR=Unknown error
>> > > 26-Mar 11:33 ilemma009-dir: Start Backup JobId 21,
>> > > Job=Client1.2007-03-26_11.33.
>> > > 00
>> > > 26-Mar 11:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
>> > > Cannot find
>> > > any appendable volumes.
>> > > Please use the "label" command to create a new Volume for:
>> > > Storage: "HPStorageTape0" (Tape0)
>> > > Media type: damnedHPUltriumTape
>> > > Pool: Default
>> > > 26-Mar 11:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
>> > > ../../lib/message
>> > > .c:713 Operator mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
>> > > Administrato
>> > > r
>> > > ERR=Unknown error
>> > > 26-Mar 12:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
>> > > Cannot find
>> > > any appendable volumes.
>> > > Please use the "label" command to create a new Volume for:
>> > > Storage: "HPStorageTape0" (Tape0)
>> > > Media type: damnedHPUltriumTape
>> > > Pool: Default
>> > > 26-Mar 12:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
>> > > ../../lib/message
>> > > .c:713 Operator mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
>> > > Administrato
>> > > r
>> > > ERR=Unknown error
>> > > 26-Mar 14:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
>> > > Cannot find
>> > > any appendable volumes.
>> > > Please use the "label" command to create a new Volume for:
>> > > Storage: "HPStorageTape0" (Tape0)
>> > > Media type: damnedHPUltriumTape
>> > > Pool: Default
>> > > 26-Mar 14:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
>> > > ../../lib/message
>> > > .c:713 Operator mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
>> > > Administrato
>> > > r
>> > > ERR=Unknown error
>> > > 26-Mar 15:04 ilemma009-dir: Start Backup JobId 22,
>> > > Job=Client1.2007-03-26_15.04.
>> > > 00
>> > > 26-Mar 15:04 ilemma009-sd: Failed command:
>> > > 26-Mar 15:04 ilemma009-sd: Client1.2007-03-26_15.04.00 Fatal error:
>> > > Device "HPStorageAutochanger" with MediaType
>> > > "damnedHPUltriumTape" requeste
>> > > d by DIR not found in SD Device resources.
>> > > 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Fatal error:
>> > > Storage daemon didn't accept Device "HPStorageAutochanger"
>> because:
>> > > 3924 Device "HPStorageAutochanger" not in SD Device resources.
>> > > 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Error: Bacula
>> > > 2.0.3 (06M
>> > > ar07): 26-Mar-2007 15:04:02
>> > > JobId: 22
>> > > Job: Client1.2007-03-26_15.04.00
>> > > Backup Level: Full
>> > > Client: "ilemma009-fd" 2.0.3 (06Mar07)
>> > > Linux,Cross-compile,Win
>> > > 32
>> > > FileSet: "Test Set" 2007-03-08 23:05:00
>> > > Pool: "Default" (From Job resource)
>> > > Storage: "HPTape" (From Job resource)
>> > > Scheduled time: 26-Mar-2007 15:04:00
>> > > Start time: 26-Mar-2007 15:04:02
>> > > End time: 26-Mar-2007 15:04:02
>> > > Elapsed time: 0 secs
>> > > Priority: 10
>> > > FD Files Written: 0
>> > > SD Files Written: 0
>> > > FD Bytes Written: 0 (0 B)
>> > > SD Bytes Written: 0 (0 B)
>> > > Rate: 0.0 KB/s
>> > > Software Compression: None
>> > > VSS: no
>> > > Encryption: no
>> > > Volume name(s):
>> > > Volume Session Id: 1
>> > > Volume Session Time: 1174921327
>> > > Last Volume Bytes: 0 (0 B)
>> > > Non-fatal FD errors: 0
>> > > SD Errors: 0
>> > > FD termination status:
>> > > SD termination status:
>> > > Termination: *** Backup Error ***
>> > >
>> > > 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
>> > > 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:302 Retrying connection using "localhost".
>> > > 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
>> > > 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Error:
>> > > ../../lib/message
>> > > .c:492 Mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
>> > > ERR=Unknown error
>> > > 26-Mar 15:07 ilemma009-dir: Start Backup JobId 23,
>> > > Job=Client1.2007-03-26_15.07.
>> > > 00
>> > > 26-Mar 15:07 ilemma009-sd: Failed command:
>> > > 26-Mar 15:07 ilemma009-sd: Client1.2007-03-26_15.07.00 Fatal error:
>> > > Device "HPStorageAutochanger" with MediaType
>> > > "damnedHPUltriumTape" requeste
>> > > d by DIR not found in SD Device resources.
>> > > 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Fatal error:
>> > > Storage daemon didn't accept Device "HPStorageAutochanger"
>> because:
>> > > 3924 Device "HPStorageAutochanger" not in SD Device resources.
>> > > 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Error: Bacula
>> > > 2.0.3 (06M
>> > > ar07): 26-Mar-2007 15:07:02
>> > > JobId: 23
>> > > Job: Client1.2007-03-26_15.07.00
>> > > Backup Level: Full
>> > > Client: "ilemma009-fd" 2.0.3 (06Mar07)
>> > > Linux,Cross-compile,Win
>> > > 32
>> > > FileSet: "Test Set" 2007-03-08 23:05:00
>> > > Pool: "Default" (From Job resource)
>> > > Storage: "HPTape" (From Job resource)
>> > > Scheduled time: 26-Mar-2007 15:07:00
>> > > Start time: 26-Mar-2007 15:07:02
>> > > End time: 26-Mar-2007 15:07:02
>> > > Elapsed time: 0 secs
>> > > Priority: 10
>> > > FD Files Written: 0
>> > > SD Files Written: 0
>> > > FD Bytes Written: 0 (0 B)
>> > > SD Bytes Written: 0 (0 B)
>> > > Rate: 0.0 KB/s
>> > > Software Compression: None
>> > > VSS: no
>> > > Encryption: no
>> > > Volume name(s):
>> > > Volume Session Id: 1
>> > > Volume Session Time: 1174921579
>> > > Last Volume Bytes: 0 (0 B)
>> > > Non-fatal FD errors: 0
>> > > SD Errors: 0
>> > > FD termination status:
>> > > SD termination status:
>> > > Termination: *** Backup Error ***
>> > >
>> > > 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
>> > > 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:302 Retrying connection using "localhost".
>> > > 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
>> > > 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Error:
>> > > ../../lib/message
>> > > .c:492 Mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
>> > > ERR=Unknown error
>> > > 26-Mar 15:10 ilemma009-dir: Start Backup JobId 24,
>> > > Job=Client1.2007-03-26_15.10.
>> > > 00
>> > > 26-Mar 15:10 ilemma009-sd: Failed command:
>> > > 26-Mar 15:10 ilemma009-sd: Client1.2007-03-26_15.10.00 Fatal error:
>> > > Device "HPStorageAutochanger" with MediaType
>> > > "damnedHPUltriumTape" requeste
>> > > d by DIR not found in SD Device resources.
>> > > 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Fatal error:
>> > > Storage daemon didn't accept Device "HPStorageAutochanger"
>> because:
>> > > 3924 Device "HPStorageAutochanger" not in SD Device resources.
>> > > 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Error: Bacula
>> > > 2.0.3 (06M
>> > > ar07): 26-Mar-2007 15:10:02
>> > > JobId: 24
>> > > Job: Client1.2007-03-26_15.10.00
>> > > Backup Level: Full
>> > > Client: "ilemma009-fd" 2.0.3 (06Mar07)
>> > > Linux,Cross-compile,Win
>> > > 32
>> > > FileSet: "Test Set" 2007-03-08 23:05:00
>> > > Pool: "Default" (From Job resource)
>> > > Storage: "HPTape" (From Job resource)
>> > > Scheduled time: 26-Mar-2007 15:10:00
>> > > Start time: 26-Mar-2007 15:10:02
>> > > End time: 26-Mar-2007 15:10:02
>> > > Elapsed time: 0 secs
>> > > Priority: 10
>> > > FD Files Written: 0
>> > > SD Files Written: 0
>> > > FD Bytes Written: 0 (0 B)
>> > > SD Bytes Written: 0 (0 B)
>> > > Rate: 0.0 KB/s
>> > > Software Compression: None
>> > > VSS: no
>> > > Encryption: no
>> > > Volume name(s):
>> > > Volume Session Id: 1
>> > > Volume Session Time: 1174921699
>> > > Last Volume Bytes: 0 (0 B)
>> > > Non-fatal FD errors: 0
>> > > SD Errors: 0
>> > > FD termination status:
>> > > SD termination status:
>> > > Termination: *** Backup Error ***
>> > >
>> > > 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
>> > > 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:302 Retrying connection using "localhost".
>> > > 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
>> > > ../../tool
>> > > s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
>> > > 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Error:
>> > > ../../lib/message
>> > > .c:492 Mail program terminated in error.
>> > > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
>> > > Administrato
>> > > r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
>> > > ERR=Unknown error
>> > > *
>> > >
>> > > ----- Message d'origine ----
>> > > De : Kern Sibbald <[EMAIL PROTECTED]>
>> > > À : bacula-users@lists.sourceforge.net
>> > > Cc : Brian Debelius <[EMAIL PROTECTED]>; [EMAIL PROTECTED]
>> > > Envoyé le : Lundi, 26 Mars 2007, 14h40mn 00s
>> > > Objet : Re: [Bacula-users] Re : Windows::Permission denied
>> > >
>> > > I don't think that will work. I recommend that you do not put min/max
>> > > block
>> > > size directives unless you are forced to, and almost certainly Bacula
>> > > will
>> > > not work with those values, which are what the drive supports but not
>> > > approprate for Bacula blocks.
>> > >
>> > > On Monday 26 March 2007 15:53, Brian Debelius wrote:
>> > > > Changes below in bold
>> > > >
>> > > >
>> > > > Device {
>> > > > Name = HPStorageTape0
>> > > > Archive Device = Tape0
>> > > > Drive Index = 0
>> > > > Device Type = Tape
>> > > > Changer Device = 4:0:5:1
>> > > > Media Type = "*HPUltriumTape*"
>> > > > Autochanger = yes
>> > > > *LabelMedia = yes
>> > > > AutomaticMount = yes*
>> > > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
>> > > > Autoselect = yes
>> > > > Always Open = *no*
>> > > > Removable media = yes
>> > > > Random access = no
>> > > > Requires Mount = no
>> > > > Minimum block size = *1*
>> > > > Maximum block size = *16777215*
>> > > > }
>> > > >
>> > > > Device {
>> > > > Name = HPStorageTape1
>> > > > Archive Device = Tape1
>> > > > Drive Index = 1
>> > > > Device Type = Tape
>> > > > Changer Device = 4:0:5:1
>> > > > Media Type = "*HPUltriumTape*"
>> > > > Autochanger = yes
>> > > > *LabelMedia = yes
>> > > > AutomaticMount = yes*
>> > > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
>> > > > Autoselect = yes
>> > > > Always Open = *no*
>> > > > Removable media = yes
>> > > > Random access = no
>> > > > Requires Mount = no
>> > > > Minimum block size = *1*
>> > > > Maximum block size = *16777215*
>> > > >
>> > > > }
>> > > >
>> > > > Autochanger {
>> > > > Name = HPStorageAutochanger
>> > > > Device = HPStorageTape0,HPStorageTape1
>> > > > Changer Command = "mtx-changer %c %o %S %a %d"
>> > > > Changer Device = 4:0:5:1
>> > > > # Label media = yes
>> > > > # Automatic mount = yes
>> > > > }
>> > > > [EMAIL PROTECTED] wrote:
>> > > > > C:\Program Files\Bacula\bin>tapeinfo -f Tape0
>> > > > > Product Type: Tape Drive
>> > > > > Vendor ID: 'HP '
>> > > > > Product ID: 'Ultrium 1-SCSI '
>> > > > > Revision: 'P54W'
>> > > > > Attached Changer API: No
>> > > > > SerialNumber: 'HU10628AN8'
>> > > > > MinBlock:1
>> > > > > MaxBlock:16777215
>> > > > > SCSI ID: 0
>> > > > > SCSI LUN: 0
>> > > > > Ready: no
>> > > > >
>> > > > > Device {
>> > > > > Name = HPStorageTape0Archive Device = Tape0
>> > > > > Device Type = Tape
>> > > > > Media Type = "*HPUltriumTape*"
>> > > > > Autochanger = yes
>> > > > > Changer Device = 4:0:5:1
>> > > > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
>> > > > >
>> > > > > Autoselect = yes
>> > > > > Always Open = yes
>> > > > > Removable media = yes
>> > > > > Random access = no
>> > > > > Requires Mount = no
>> > > > > Minimum block size = 100
>> > > > > Maximum block size = 100
>> > > > > }
>> > > > >
>> > > > > Device {
>> > > > > Name = HPStorageTape1
>> > > > > Archive Device = Tape1
>> > > > > Device Type = Tape
>> > > > > Media Type = "damnedHPUltriumTape"
>> > > > > Autochanger = yes
>> > > > > Changer Device = 4:0:5:1
>> > > > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
>> > > > > Drive Index = 1
>> > > > > Autoselect = yes
>> > > > > Always Open = yes
>> > > > > Removable media = yes
>> > > > > Random access = no
>> > > > > Requires Mount = no
>> > > > > Minimum block size = 100
>> > > > > Maximum block size = 100
>> > > > > }
>> > > > >
>> > > > > Autochanger {
>> > > > > Name = HPStorageAutochanger
>> > > > > Device = HPStorageTape0,HPStorageTape1
>> > > > > Changer Command = "mtx-changer %c %o %S %a %d"
>> > > > > Changer Device = 4:0:5:1
>> > > > > # Label media = yes
>> > > > > # Automatic mount = yes
>> > > > > }
>> > > >
>> > > >
>> > >
>> > >
>> > >
>> ------------------------------------------------------------------------
>> > > Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
>> > > questions ! Profitez des connaissances, des opinions et des
>> > > expériences des internautes sur Yahoo! Questions/Réponses
>> > > <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
>> >
>> >
>> >
>> > ------------------------------------------------------------------------
>> > Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
>> > questions ! Profitez des connaissances, des opinions et des
>> > expériences des internautes sur Yahoo! Questions/Réponses
>> > <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
>>
>>
>>
>> ------------------------------------------------------------------------
>> Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
>> questions ! Profitez des connaissances, des opinions et des
>> expériences des internautes sur Yahoo! Questions/Réponses
>> <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
>
>
>
> ------------------------------------------------------------------------
> Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
> questions ! Profitez des connaissances, des opinions et des expériences
> des internautes sur Yahoo! Questions/Réponses
> <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
>
>
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
- --
---- _ _ _ _ ___ _ _ _
|Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer III
|$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922)
\__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFGCTVKmb+gadEcsb4RAuSPAJ9lbu23tTdxnJhU70+qSXfJUI1cZQCgshf4
mDUkuRlAqSuawN+Y2AXH1ow=
=7auE
-----END PGP SIGNATURE-----
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
