I have Adic Scalar 24 with dual IBM Ultrium-TD3 (Firmware version 54k1)
(one drive dedicated to our Windows servers and the other dedicated to
our Unix systems running Bacula version 2.0.2) which is an LTO-3
(400/800 GB) drive. I have a 1 (59% used) and a 2 (49% used) Terabyte
file system that I back up to it. I have tested all the tapes to ensure
they are good (was able to write cleanly about 600Gb to each with no
problem outside of bacula) but when I run the backup the first tape goes
thought just fine (I list media and it shows 600GB someodd on that tape)
but subsequent tapes (it seem to swap tapes just fine) get the following
error on them, different size on all the tapes but around 12GB is where
errors out. I have also included an excerpt from my bacula-sd.conf file
just in case I screwed up something there. My OS is freebsd 6.1 stable.
I experienced these same errors with version 1.38, which is why I
upgraded. I need to know if this is a hardware issue or a bacula issue
before I call my hardware vendor frothing at the mouth. Any help would
be appreciated. Let me know if there is any other information you need.
Tom Arseneault
Network Engineer
Voxify, Inc.
19-Mar 09:01 chasm-sd: 3304 Issuing autochanger "load slot 4, drive 0"
command.
19-Mar 09:02 chasm-sd: 3305 Autochanger "load slot 4, drive 0", status
is OK.
19-Mar 09:02 chasm-sd: 3301 Issuing autochanger "loaded? drive 0"
command.
19-Mar 09:02 chasm-sd: 3302 Autochanger "loaded? drive 0", result is
Slot 4.
19-Mar 09:02 chasm-sd: Wrote label to prelabeled Volume "000010" on
device "AdicScalar24" (/dev/nsa0.0)
19-Mar 09:02 chasm-sd: New volume "000010" mounted on device
"AdicScalar24" (/dev/nsa0.0) at 19-Mar-2007 09:02.
19-Mar 10:02 chasm-sd: chasm.2007-03-17_17.41.49 Error: block.c:569
Write error at 12:3826 on device "AdicScalar24" (/dev/nsa0.0).
ERR=Operation not permitted.
19-Mar 10:06 chasm-sd: chasm.2007-03-17_17.41.49 Error: Error writing
final EOF to tape. This Volume may not be readable.
dev.c:1687 ioctl MTWEOF error on "AdicScalar24" (/dev/nsa0.0).
ERR=Input/output error.
19-Mar 10:06 chasm-sd: End of medium on Volume "000010"
Bytes=12,246,054,912 Blocks=189,825 at 19-Mar-2007 10:06.
19-Mar 10:06 chasm-sd: 3307 Issuing autochanger "unload slot 4, drive 0"
command.
Device {
Device Type = Tape
Name = AdicScalar24
Media Type = LTO-3
Archive Device = /dev/nsa0.0
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Changer Command = "/usr/local/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/changer
AutoChanger = yes
Alert Command = "sh -c .tapeinfo -f %c |grep TapeAlert|cat."
# FreeBSD Specific Settings
Offline On Unmount = no
Hardware End of Medium = no
BSF at EOM = yes
Backward Space Record = no
Fast Forward Space File = no
TWO EOF = yes
}
#
# An autochanger device with two drives
#
Autochanger {
Name = Scalar24
Device = AdicScalar24
Changer Command = "/usr/local/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/changer
}
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
