[Kristian Rink <[EMAIL PROTECTED]> @ Fri, 23 Mar 2007 09:49:15 +0100]
...
> backer:/etc/bacula# btape -c /etc/bacula/bacula-sd.conf /dev/nst0
> Tape block granularity is 1024 bytes.
> btape: butil.c:272 Using device: "/dev/nst0" for writing.
> 23-Mar 09:44 btape: 3301 Issuing autochanger "loaded drive 0" command.
> 23-Mar 09:44 btape: 3302 Autochanger "loaded drive 0", result: nothing
> loaded.
...
Something else on that on which I do not know whether it relates to it:
Having set up the device (as pointed out earlier, in bacula-sd.conf) and
the Storage in bacula-dir.conf, I tried running "update slots scan"
from within the bacula console:
...
*update slots
Automatically selected Storage: Tape
Connecting to Storage daemon Tape at backer:9103 ...
3995 Device "LTO-2" (/dev/nst0) is not an autochanger.
Enter autochanger drive[0]:
...
Why? :o What did I miss so far? Both the Device and Storage
configuration does have Autochanger=yes set, and I don't see any
options missing here... Any ideas?
Thanks in advance and bye,
Kristian
- storage configuration:
Storage {
Name = Tape
Address = backer # N.B. Use a fully qualified name here
SDPort = 9103
Password = "..."
Device = LTO-2
Media Type = LTO-2
Autochanger=yes
}
Dipl.-Ing.(BA) Kristian Rink * Software- und Systemingenieur
planConnect GmbH * Strehlener Str. 12 - 14 * 01069 Dresden
fon: 0351 4657770 * mail: [EMAIL PROTECTED] * http://www.pm-planc.de
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
