While setting up Bacula and following "Brief Tutorial", I see a strange
problem: after the command "run" asking me for labelling the tape, I
give the command "label", and bconsole gets lock for some 2 minutes,
than says:
3910 Unable to open device "DAT72" (/dev/nst0): ERR=dev.c:424 Unable to
open device "DAT72" (/dev/nst0): ERR=Permission denied
The most strange thing is that if I use btape /dev/nst0 and issue a
command "label", it works correctly and the "read" command says the tape
has been correctly labelled.
The Linux Box is a FC4.
bacula-sd.conf file about device is:
Device {
Name = DAT72
Media Type = DSS-3
Device Type = Tape
Archive Device = /dev/nst0
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Label Media = yes;
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
and in the bacula-dir.conf:
Storage {
Name = Tape
Address = backupserver.pippo.local #existing address resolved
SDPort = 9103
Password = "xxxxxxxx"
Device = DAT72
Media Type = DSS-3
}
Any help?
Thanks
Alfonso
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
