Hi, try this comand "update slots scan" and see if help you.
[EMAIL PROTECTED] escreveu: > Send Bacula-users mailing list submissions to > bacula-users@lists.sourceforge.net > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.sourceforge.net/lists/listinfo/bacula-users > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Bacula-users digest..." > > > Today's Topics: > > 1. Re: Autochanger with bacula 2.x (Jonathan B Bayer) > 2. Re: Premature full tape indication. (Erik P. Olsen) > 3. Re: Autochanger with bacula 2.x (Jonathan B Bayer) > 4. Re: Bacula Web (Leonardo Goldim) > 5. bacula 2.0.2 on Mac OS X (Jacques Foucry) > 6. Re: Problems appending on FreeBSD (Andrea Venturoli) > 7. Boostrap file, substitution and alternate Pools... > (Brice Figureau) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 15 Feb 2007 17:10:02 -0500 > From: Jonathan B Bayer <[EMAIL PROTECTED]> > Subject: Re: [Bacula-users] Autochanger with bacula 2.x > To: "Magnus Ahl" <[EMAIL PROTECTED]>, > bacula-users@lists.sourceforge.net > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii > > Hello Magnus, > > I just installed a Dell 124T with autochanger for 16 tapes. However, > when I use bconsole to do the "update" command, it only sees 8 tapes, > in fact it only thinks it is an 8 tape changer. > > What do I have to do to make it see all 16 tapes? > > thanks in advance. > > > JBB > > Tuesday, February 13, 2007, 5:09:35 AM, you wrote: > > >>> Hi, >>> I have an Dell 124T with Autochanger for 8 tapes. My >>> configuration is as follows. So, a few questions: >>> . Is the archive device incremental (/dev/nst0, /dev/nst1, ..) ? >>> > > >> We use the exact same hardware, but with 16 tapes. /dev/nst0 works like a >> charm. >> > > >> Just to be sure: you have detected the SCSI device in the OS? Initialy the >> DELL PV 124T has a high enough SCSI id not to be detected automaticly at >> startup by a few OS:es. We've manualy had to add to /etc/rc.d/rc.local: >> > > >> echo "scsi-add-single-device 0 0 6 1" > /proc/scsi/scsi >> > > >> on our CentOS 3.8 server. YMMMV, of course. >> > > > >>> . When using this configuration, I have in bconsole a message >>> to label the tape but the tape is already labelled (by btape) >>> and I cannot force a new label. So, how to label my eight tapes ? >>> > > >> Our server came with blank tapes so there were no problem with labeling. How >> about unmounting them from bacula, feed them to the drive manualy using mtx >> and erasing them with "/bin/mt -f /dev/nst0 erase"? >> > > > >> regards, >> > > >> -- >> Infogate AB [EMAIL PROTECTED] >> Storgatan 29 tel: 035-171970 >> Box 345 fax: 035-171979 >> 301 08 Halmstad www.infogate.se >> > > > >> ------------------------------------------------------------------------- >> Using Tomcat but need to do more? Need to support web services, security? >> Get stuff done quickly with pre-integrated technology to make your job >> easier. >> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> _______________________________________________ >> Bacula-users mailing list >> Bacula-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/bacula-users >> > > > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
