Did you restart the storage daemon and director after making those changes? Also run an update slots on the ExabytePacketloader itself as opposed to the VXA-320. I'm about out of ideas...
Marius Dorlöchter wrote: > Thank you for your reply. I have recorded the changes in my > configuration files. The failure is the same. But it appears only when > I try to write on a new (prelabeled) volume. Can this be the problem? > > Best Regards! > > Marius > > > Aaron Knister schrieb: >> The problem is that your jobs are configured to use the tape drive as >> the storage as opposed to the loader. >> >> The following line in your dir config - >> >> Storage = VXA-320 >> >> >> Should be changed to >> >> Storage = ExabytePacketloader1Ux10 >> >> Also add this line to your sd config in the VXA-320 section- >> >> Changer Device = /dev/sg1 >> >> >> >> You have to tell your jobs to use the Autochanger device instead of >> the actual tape drive. If you use the actual tape drive then its not >> aware of the autochanging capabilities of your loader. >> >> I hope that makes sense. >> >> -Aaron >> >> Marius Dorlöchter wrote: >>> Hello, >>> >>> it's my fist post. Please exused my worse english. I have already >>> entered a bug report: http://bugs.bacula.org/view.php?id=774. But i >>> am not sure that it is a bug. >>> So that is my problem. >>> >>> I have an autochanger Exabyte Packetloader 10. When a Job starts it >>> load the Tape but it is not able to mount the Volume. >>> >>> Device status: >>> Autochanger "ExabytePacketloader1Ux10" with devices: >>> "VXA-320" (/dev/st0) >>> Device "FileStorage" (/var/bacula) is not open. >>> Device "VXA-320" (/dev/st0) open but no Bacula volume is currently >>> mounted. >>> Device is BLOCKED waiting for mount of volume "A0000007". >>> Slot 7 is loaded in drive 0. >>> Total Bytes Read=0 Blocks Read=0 Bytes/block=0 >>> Positioned at File=0 Block=0 >>> ==== >>> >>> In Use Volume status: >>> A0000007 on device "VXA-320" (/dev/st0) >>> >>> A mount of the device don't help. I have to unmount and then to >>> mount it. Then the job runs. But the failure returns every night. >>> >>> >>> bacula-sd.conf >>> -------------- >>> ... >>> Autochanger { >>> Name = Exabyte Packetloader 1Ux10 >>> Device = VXA-320 >>> Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d" >>> Changer Device = /dev/sg1 >>> } >>> >>> Device { >>> Name = VXA-320 >>> Drive Index = 0 >>> Media Type = X-23 >>> Archive Device = /dev/st0 >>> AutomaticMount = yes; >>> AlwaysOpen = yes; >>> RemovableMedia = yes; >>> RandomAccess = no; >>> AutoChanger = yes >>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" >>> } >>> ... >>> >>> bacuala.dir.conf >>> ---------------- >>> ... >>> Job { >>> Name = "NightlySave-server02" >>> Type = Backup >>> Level = Full >>> Client = server02-fd >>> FileSet = "Full Set" >>> Messages = Standard >>> Storage = VXA-320 >>> Pool = Default >>> Schedule = "NightlySave" >>> Run Before Job = "/etc/bacula/before_job" >>> } >>> >>> Schedule { >>> Name = "NightlySave" >>> Run = Level=Full Pool=MonatsLibraryPool 1st sun at 23:05 >>> Run = Level=Full Pool=WochenLibraryPool 2nd-5th sun at 23:05 >>> Run = Level=Differential Pool=MontagPool Monday at 23:05 >>> Run = Level=Differential Pool=DienstagPool Tuesday at 23:05 >>> Run = Level=Differential Pool=MittwochPool Wednesday at 23:05 >>> Run = Level=Differential Pool=DonnerstagPool Thursday at 23:05 >>> Run = Level=Differential Pool=FreitagPool Friday at 23:05 >>> Run = Level=Full Pool=MonatsCyclePool 1st sun at 22:55 >>> Run = Level=Full Pool=WochenCyclePool 2nd-5th sun at 22:55 >>> } >>> >>> Pool { >>> Name = MontagPool >>> Pool Type = Backup >>> Recycle = yes >>> AutoPrune = yes >>> Volume Retention = 6d >>> } >>> ... >>> >>> before_job >>> ---------- >>> bconsole <<EOF >>> update slots VXA-320 >>> EOF >>> >>> >>> Thanks for your help. >>> >>> Regards! >>> >>> mortice >>> >>> ------------------------------------------------------------------------- >>> >>> Using Tomcat but need to do more? Need to support web services, >>> security? >>> Get stuff done quickly with pre-integrated technology to make your >>> job easier. >>> Download IBM WebSphere Application Server v.1.0.1 based on Apache >>> Geronimo >>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>> >>> _______________________________________________ >>> Bacula-users mailing list >>> Bacula-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/bacula-users >>> >>> >> > > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
