On Monday 22 January 2007 06:45, Ralf Winkler wrote:
> Hello all,
>
> i am a bit confused now.
>
> I use Bacula Versioin 1.38.11 on 2 different systems.
> On both systems Bacula write to a hard drive and shall use the file for a
> period of 24 hours (23 hours 50 mins excactly).
> If i understand the docu in the right way, i have to define this in the
> Pool definition.
> So i did.
>
> # Default pool definition
> Pool {
> Name = Default
> Pool Type = Backup
> Recycle = yes # Bacula can automatically recycle
> Volumes
> LabelFormat = "File-Name"
> AutoPrune = yes # Prune expired volumes
> Volume Retention = 10 days # changed to 10 days instead of 1
> year Maximum Volumes = 10 # set too 12 tapes (with 2 spares)
> Volume Use Duration = 1430m # set to 23h 50m
> Accept Any Volume = yes # write on any volume in the pool
>
>
> And now my problem, on one system, Bacula change and write to a new file
> every day. On the other system Bacula always want to write to the same
> file. I have to set the file to used in the bconsole then Bacula will use
> the next file, but don't switch to the next file after 24 hours, i have to
> do it again by hand.
>
> The definition is except the Label the same on both machines.
> Did i miss something?
You need to do "update volume" or one of the several variations.
>
> TIA
> Ralf
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
