from the doc:
Please note that it is important to include the Autochanger = yes
directive in each Device definition that belongs to an Autochanger.
Justin Wainwright schrieb:
> New Bacula user here- I've gone over the config documentation a number
> of times and I hope I'm missing something small...but I'm having issues
> with 2-Sun L25s linked together with a Quantum StackLink on Debian etch
> (2.6.x) with MySQL 5.0.30.
>
> I've had the same issues with both the prepackaged Debian packages and
> building from source, which suggests a config file problem...
>
> I can load/unload tapes just fine and do all mtx commands with no
> problems. All bacula services start fine (running as root). All
> devices exist under /dev and permissions are correct for root. Each L25
> has 2 drives available, giving me 4 drives able to write
> simultaneously. However, bconsole won't run 'update slots scan' for the
> autochanger (since it tries to access the drive's archive device instead
> of the changer device), and I can successfully run 'btape test' and
> 'btape fill', but autochanger does NOTHING- just gives me another * prompt.
>
> ----------------------------------------------------------------
> results from dmesg:
> ch 2:0:0:0: Attached scsi changer ch0
> ch 2:0:0:0: Attached scsi generic sg0 type 8
> st 2:0:1:0: Attached scsi tape st0
> st 2:0:1:0: Attached scsi generic sg1 type 1
> st 2:0:2:0: Attached scsi tape st1
> st 2:0:2:0: Attached scsi generic sg2 type 1
> st 2:0:3:0: Attached scsi tape st2
> st 2:0:3:0: Attached scsi generic sg3 type 1
> st 2:0:4:0: Attached scsi tape st3
> st 2:0:4:0: Attached scsi generic sg4 type 1
> ----------------------------------------------------------------
> from bacula-dir:
> Storage {
> Name = StackLink
> Address = myhost
> SDPort = 9103
> Password = ""
> Device = StackLink
> Autochanger = yes
> Media Type = LTO-2
> }
> -----------------------------------------------------------------
> from bacula-sd:
> Autochanger {
> Name = StackLink
> Device = L25-1-1, L25-1-2, L25-2-1, L25-2-2
> Changer Device = /dev/sg0
> Changer Command = "/etc/bacula/mtx-changer %c %o %d %S" # I've
> modified mtx-changer to use drive before slot
> }
>
> Device {
> Name = L25-1-1
> Media Type = LTO-2
> Archive Device = /dev/nst0
> AutomaticMount = yes;
> Device Type = Tape
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Autoselect = yes
> Drive Index = 0;
> }
>
> Device {
> Name = L25-1-2
> Media Type = LTO-2
> Archive Device = /dev/nst1
> AutomaticMount = yes;
> Device Type = Tape
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Autoselect = yes
> Drive Index = 1;
> }
>
> Device {
> Name = L25-2-1
> Media Type = LTO-2
> Archive Device = /dev/nst2
> AutomaticMount = yes;
> Device Type = Tape
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Autoselect = yes
> Drive Index = 2;
> }
>
> Device {
> Name = L25-2-2
> Media Type = LTO-2
> Archive Device = /dev/nst3
> AutomaticMount = yes;
> Device Type = Tape
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Autoselect = yes
> Drive Index = 3;
> }
> ----------------------------------------------------
> result from bconsole 'update slots scan':
> *update slots scan
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> Automatically selected Storage: StackLink
> Connecting to Storage daemon StackLink at myhost:9103 ...
> 3993 Device "L25-1-1" (/dev/nst0) not an autochanger device.
> Device "StackLink" has 0 slots.
> No slots in changer to scan.
> ----------------------------------------------------
>
> Thanks in advance for any help you can offer.
> -Justin
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
--
IC3S Information, Computer und Solartechnik AG
Bäckerbarg 6, 22889 Tangstedt, Germany
Telefon +49.4109.555.121
Telefax +49.4109.555.57
E-Mail [EMAIL PROTECTED]
Web http://www.ic3s.de/
Vorstand: Jan Behrmann (Vorsitzender), Stefan Fehlauer
Aufsichtsrat: Sven Niklasson (Vorsitzender)
Dresdner Bank (200 800 00), Kto. 0123 9582 00
Commerzbank (200 400 00), Kto. 8540 288
Amtsgericht Kiel HRB 7590
UST.IdNr. DE184532766
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
