Any Help will be greatly appreiciated.
I can do the test backup no problem but when I add a second client and try to
back it up, I get the following error:
Connecting to Director 192.168.3.27:9101
1000 OK: backup-temp-dir Version: 1.38.11 (28 June 2006)
run
Using default Catalog name=MyCatalog DB=bacula
A job name must be specified.
The defined Job resources are:
1: Client1
2: rluong-lp
3: BackupCatalog
4: RestoreFiles
Select Job resource (1-4): 2
Run Backup job
JobName: rluong-lp
FileSet: Full Set
Level: Incremental
Client: rluong-lp-fd
Storage: File
Pool: Default
When: 2006-11-29 11:31:19
Priority: 10
OK to run? (yes/mod/no): yes
Job started. JobId=9
29-Nov 11:31 backup-temp-dir: No prior Full backup Job record found.
29-Nov 11:31 backup-temp-dir: No prior or suitable Full backup found. Doing
FULL backup.
29-Nov 11:31 backup-temp-dir: Start Backup JobId 9,
Job=rluong-lp.2006-11-29_11.31.22
29-Nov 11:32 rluong-lp-fd: rluong-lp.2006-11-29_11.31.22 Warning:
c:\cygwin\home\kern\bacula\k\src\win32\lib\../../lib/bnet.c:853 Could not
connect to Storage daemon on 192.168.3.27:9103. ERR=No error
Retrying ...
29-Nov 11:48 rluong-lp-fd: rluong-lp.2006-11-29_11.31.22 Warning:
c:\cygwin\home\kern\bacula\k\src\win32\lib\../../lib/bnet.c:853 Could not
connect to Storage daemon on 192.168.3.27:9103. ERR=No error
Retrying ...
cancel jobid 9
Automatically selected Job: JobId=9 Job=rluong-lp.2006-11-29_11.31.22
Confirm cancel (yes/no): yes
2001 Job rluong-lp.2006-11-29_11.31.22 marked to be canceled.
3000 Job rluong-lp.2006-11-29_11.31.22 marked to be canceled.
29-Nov 12:00 rluong-lp-fd: rluong-lp.2006-11-29_11.31.22 Fatal error: Failed to
connect to Storage daemon: 192.168.3.27:9103
29-Nov 12:00 backup-temp-dir: rluong-lp.2006-11-29_11.31.22 Fatal error: Socket
error on Storage command: ERR=No data available
29-Nov 12:00 backup-temp-dir: Bacula 1.38.11 (28Jun06): 29-Nov-2006 12:00:13
JobId: 9
Job: rluong-lp.2006-11-29_11.31.22
Backup Level: Full (upgraded from Incremental)
Client: "rluong-lp-fd" Windows XP,MVS,NT 5.1.2600
FileSet: "Full Set" 2006-11-29 11:31:24
Pool: "Default"
Storage: "File"
Scheduled time: 29-Nov-2006 11:31:19
Start time: 29-Nov-2006 11:31:24
End time: 29-Nov-2006 12:00:13
Elapsed time: 28 mins 49 secs
Priority: 10
FD Files Written: 0
SD Files Written: 0
FD Bytes Written: 0 (0 B)
SD Bytes Written: 0 (0 B)
Rate: 0.0 KB/s
Software Compression: None
Volume name(s):
Volume Session Id: 1
Volume Session Time: 1164828666
Last Volume Bytes: 41,606,608 (41.60 MB)
Non-fatal FD errors: 0
SD Errors: 0
FD termination status:
SD termination status: Waiting on FD
Termination: Backup Canceled
The dirctor and storage is running on Fedor 6 bacula 1.38.11. The windows XP
client is running on winbacula-1.38.10.
Here is my bacula-dir.conf
#
# Default Bacula Director Configuration file
#
# The only thing that MUST be changed is to add one or more
# file or directory names in the Include directive of the
# FileSet resource.
#
# For Bacula release 1.38.11 (28 June 2006) -- redhat (Zod)
#
# You might also want to change the default email address
# from root to your address. See the "mail" and "operator"
# directives in the Messages resource.
#
Director { # define myself
Name = backup-temp-dir
DIRport = 9101 # where we listen for UA connections
QueryFile = "/usr/local/bacula/etc/query.sql"
WorkingDirectory = "/usr/local/bacula/working"
PidDirectory = "/usr/local/bacula/var/run"
Maximum Concurrent Jobs = 1
Password = "xxxxx" # Console password
Messages = Daemon
}
JobDefs {
Name = "DefaultJob"
Type = Backup
Level = Incremental
Client = backup-temp-fd
FileSet = "Full Set"
Schedule = "WeeklyCycle"
Storage = File
Messages = Standard
Pool = Default
Priority = 10
}
JobDefs {
Name = "DefaultJob1"
Type = Backup
Level = Incremental
Client = rluong-lp-fd
FileSet = "Full Set1"
Schedule = "WeeklyCycle"
Storage = File
Messages = Standard
Pool = Default
Priority = 10
}
#
# Define the main nightly save backup job
# By default, this job will back up to disk in /tmp
Job {
Name = "Client1"
JobDefs = "DefaultJob"
Write Bootstrap = "/usr/local/bacula/working/Client1.bsr"
}
Job {
Name = "rluong-lp"
Client = rluong-lp-fd
JobDefs = "DefaultJob1"
Write Bootstrap = "/usr/local/bacula/working/Client2.bsr"
}
# Backup the catalog database (after the nightly save)
Job {
Name = "BackupCatalog"
JobDefs = "DefaultJob"
Level = Full
FileSet="Catalog"
Schedule = "WeeklyCycleAfterBackup"
# This creates an ASCII copy of the catalog
RunBeforeJob = "/usr/local/bacula/etc/make_catalog_backup bacula bacula"
# This deletes the copy of the catalog
RunAfterJob = "/usr/local/bacula/etc/delete_catalog_backup"
Write Bootstrap = "/usr/local/bacula/working/BackupCatalog.bsr"
Priority = 11 # run after main backup
}
#
# Standard Restore template, to be changed by Console program
# Only one such job is needed for all Jobs/Clients/Storage ...
#
Job {
Name = "RestoreFiles"
Type = Restore
Client=backup-temp-fd
FileSet="Full Set"
Storage = File
Pool = Default
Messages = Standard
Where = /tmp/bacula-restores
}
# List of files to be backed up
FileSet {
Name = "Full Set"
Include {
Options {
Compression=GZIP
signature = MD5
}
#
# Put your list of files here, preceded by 'File =', one per line
# or include an external list with:
#
# File = <file-name
#
# Note: / backs up everything on the root partition.
# if you have other partitons such as /usr or /home
# you will probably want to add them too.
#
# By default this is defined to point to the Bacula build
# directory to give a reasonable FileSet to backup to
# disk storage during initial testing.
#
File = /usr/local/src/bacula-1.38.11
}
#
# If you backup the root directory, the following two excluded
# files can be useful
#
Exclude {
File = /proc
File = /tmp
File = /.journal
File = /.fsck
}
}
FileSet {
Name = "Full Set1"
Include {
Options {
Compression=GZIP
signature = MD5
}
File = "c:\bacula"
}
}
#
# When to do the backups, full backup on first sunday of the month,
# differential (i.e. incremental since full) every other sunday,
# and incremental backups other days
Schedule {
Name = "WeeklyCycle"
Run = Full 1st sun at 23:05
Run = Differential 2nd-5th sun at 23:05
Run = Incremental mon-sat at 23:05
}
# This schedule does the catalog. It starts after the WeeklyCycle
Schedule {
Name = "WeeklyCycleAfterBackup"
Run = Full sun-sat at 23:10
}
# This is the backup of the catalog
FileSet {
Name = "Catalog"
Include {
Options {
signature = MD5
}
File = /usr/local/bacula/working/bacula.sql
}
}
# Client (File Services) to backup
Client {
Name = backup-temp-fd
Address = backup-temp
FDPort = 9102
Catalog = MyCatalog
Password = "xxxxx" # password for FileDaemon
File Retention = 30 days # 30 days
Job Retention = 6 months # six months
AutoPrune = yes # Prune expired Jobs/Files
}
#
# Second Client (File Services) to backup
# You should change Name, Address, and Password before using
#
Client {
Name = rluong-lp-fd
Address = rluong-lp.mocana.local
FDPort = 9102
Catalog = MyCatalog
Password = "xxxxx" # password for FileDaemon 2
File Retention = 30 days # 30 days
Job Retention = 6 months # six months
AutoPrune = yes # Prune expired Jobs/Files
}
# Definition of file storage device
Storage {
Name = File
# Do not use "localhost" here
Address = 192.168.3.27 # N.B. Use a fully qualified name here
SDPort = 9103
Password = "xxxxx"
Device = FileStorage
Media Type = File
}
# Definition of DDS tape storage device
#Storage {
# Name = DDS-4
# Do not use "localhost" here
# Address = backup-temp # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = "xxxxx" # password for Storage daemon
# Device = DDS-4 # must be same as Device in Storage
daemon
# Media Type = DDS-4 # must be same as MediaType in Storage
daemon
# Autochanger = yes # enable for autochanger device
#}
# Definition of 8mm tape storage device
#Storage {
# Name = "8mmDrive"
# Do not use "localhost" here
# Address = backup-temp # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = "xxxxx"
# Device = "Exabyte 8mm"
# MediaType = "8mm"
#}
# Definition of DVD storage device
#Storage {
# Name = "DVD"
# Do not use "localhost" here
# Address = backup-temp # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = "xxxxx"
# Device = "DVD Writer"
# MediaType = "DVD"
#}
# Generic catalog service
Catalog {
Name = MyCatalog
dbname = bacula; user = root; password = "[EMAIL PROTECTED]"
}
# Reasonable message delivery -- send most everything to email address
# and to the console
Messages {
Name = Standard
#
# NOTE! If you send to two email or more email addresses, you will need
# to replace the %r in the from field (-f part) with a single valid
# email address in both the mailcommand and the operatorcommand.
#
mailcommand = "/usr/local/bacula/sbin/bsmtp -h localhost -f \"\(Bacula\) %r\"
-s \"Bacula: %t %e of %c %l\" %r"
operatorcommand = "/usr/local/bacula/sbin/bsmtp -h localhost -f \"\(Bacula\)
%r\" -s \"Bacula: Intervention needed for %j\" %r"
mail = [EMAIL PROTECTED] = all, !skipped
operator = [EMAIL PROTECTED] = mount
console = all, !skipped, !saved
#
# WARNING! the following will create a file that you must cycle from
# time to time as it will grow indefinitely. However, it will
# also keep all your messages if they scroll off the console.
#
append = "/usr/local/bacula/working/log" = all, !skipped
}
#
# Message delivery for daemon messages (no job).
Messages {
Name = Daemon
mailcommand = "/usr/local/bacula/sbin/bsmtp -h localhost -f \"\(Bacula\) %r\"
-s \"Bacula daemon message\" %r"
mail = [EMAIL PROTECTED] = all, !skipped
console = all, !skipped, !saved
append = "/usr/local/bacula/working/log" = all, !skipped
}
# Default pool definition
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 365 days # one year
Accept Any Volume = yes # write on any volume in the pool
}
#
# Restricted console used by tray-monitor to get the status of the director
#
Console {
Name = backup-temp-mon
Password = "xxxxx"
CommandACL = status, .status
}
Here is my bacula dir-sd:
#
# Default Bacula Storage Daemon Configuration file
#
# For Bacula release 1.38.11 (28 June 2006) -- redhat (Zod)
#
# You may need to change the name of your tape drive
# on the "Archive Device" directive in the Device
# resource. If you change the Name and/or the
# "Media Type" in the Device resource, please ensure
# that dird.conf has corresponding changes.
#
Storage { # definition of myself
Name = backup-temp-sd
SDPort = 9103 # Director's port
WorkingDirectory = "/usr/local/bacula/working"
Pid Directory = "/usr/local/bacula/var/run"
Maximum Concurrent Jobs = 20
}
#
# List Directors who are permitted to contact Storage daemon
#
Director {
Name = backup-temp-dir
Password = "xxxxx"
}
#
# Restricted Director, used by tray-monitor to get the
# status of the storage daemon
#
Director {
Name = backup-temp-mon
Password = "xxxxx"
Monitor = yes
}
#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
# same Name and MediaType.
#
Device {
Name = FileStorage
Media Type = File
Archive Device = /usr/local/bacula/bacula-vol
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = no;
AlwaysOpen = no;
}
#
# An autochanger device with two drives
#
#Autochanger {
# Name = Autochanger
# Device = Drive-1
# Device = Drive-2
# Changer Command = "/home/kern/bacula/bin/mtx-changer %c %o %S %a %d"
# Changer Device = /dev/sg0
#}
#Device {
# Name = Drive-1 #
# Drive Index = 0
# Media Type = DLT-8000
# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
#}
#Device {
# Name = Drive-2 #
# Drive Index = 1
# Media Type = DLT-8000
# Archive Device = /dev/nst1
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
#}
#
# A Linux or Solaris tape drive
#
#Device {
# Name = DDS-4 #
# Media Type = DDS-4
# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
## Changer Command = "/usr/local/bacula/etc/mtx-changer %c %o %S %a %d"
## Changer Device = /dev/sg0
## AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
#}
#
# A FreeBSD tape drive
#
#Device {
# Name = DDS-4
# Description = "DDS-4 for FreeBSD"
# Media Type = DDS-4
# Archive Device = /dev/nsa1
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes
# Offline On Unmount = no
# Hardware End of Medium = no
# BSF at EOM = yes
# Backward Space Record = no
# Fast Forward Space File = no
# TWO EOF = yes
#}
#
# A OnStream tape drive.
# You need the kernel osst driver 0.9.14 or later, and
# do "mt -f /dev/nosst0 defblksize 32768" once as root.
#
#Device {
# Name = OnStream
# Description = "OnStream drive on Linux"
# Media Type = OnStream
# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes
# Offline On Unmount = no
## The min/max blocksizes of 32768 are *required*
# Minimum Block Size = 32768
# Maximum Block Size = 32768
#}
#
# A DVD device
#
#Device {
# Name = "DVD-Writer"
# Media Type = DVD
# Archive Device = /dev/hdc
# LabelMedia = yes; # lets Bacula label unlabeled media
# Random Access = Yes;
# AutomaticMount = yes; # when device opened, read it
# RemovableMedia = yes;
# AlwaysOpen = no;
# MaximumPartSize = 800M;
# RequiresMount = yes;
# MountPoint = /mnt/cdrom;
# MountCommand = "/bin/mount -t iso9660 -o ro %a %m";
# UnmountCommand = "/bin/umount %m";
# SpoolDirectory = /tmp/backup;
# WritePartCommand = "/etc/bacula/dvd-handler %a write %e %v"
# FreeSpaceCommand = "/etc/bacula/dvd-handler %a free"
#}
#
# For OpenBSD OS >= 3.6
#
#Device {
# Name = DDS-3
# Media Type = DDS-3
# Archive Device = /dev/nrst0
# Use MTIOCGET= no
# BSF at EOM = yes
# TWO EOF = no
# AutomaticMount = yes;
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
#}
#
# A very old Exabyte with no end of media detection
#
#Device {
# Name = "Exabyte 8mm"
# Media Type = "8mm"
# Archive Device = /dev/nst0
# Hardware end of medium = No;
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = Yes;
# RemovableMedia = yes;
# RandomAccess = no;
#}
#
# Send all messages to the Director,
# mount messages also are sent to the email address
#
Messages {
Name = Standard
director = backup-temp-dir = all
}
thanks
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
