----- Original Message ----- From: "Josh Fisher" <[EMAIL PROTECTED]> To: "Michael Fung" <[EMAIL PROTECTED]> Cc: "bacula-users" <bacula-users@lists.sourceforge.net> Sent: Thursday, November 30, 2006 9:46 PM Subject: Re: [Bacula-users] Removable Disk HOWTO
>> Also, before and after changed the script to not gives error, I still got >> the error after issue the "label barcodes" command: >> Connecting to Storage daemon USBChanger1 at 192.168.1.1:9103 ... >> 3306 Issuing autochanger "slots" command. >> Device "usb-changer-1" has 0 slots. >> No slots in changer to scan. >> >> I run the script by hand to test output: >> [EMAIL PROTECTED] bacula]# ./vchanger /etc/bacula/vchanger1.conf slots >> 7 >> >> It reports 7 slots correctly. Could you give me some hints? I am using >> Bacula 1.38.11 on RHEL 4 clone. >> > Did you run the test by hand as root? If so, then it is likely a > permissions problem. Normally, vchanger will run as the user and group > that bacula-sd runs as (usually bacula.disk if installed from RPMs). Make > sure /etc/bacula/vchanger1.conf can be read by the bacula-sd user and/or > group. Likewise, make sure the bacula-sd user and/or group has read/write > permissions for the vchanger state directory (probably at > /var/bacula/vchanger1). Also, the bacula-sd user/group must have > read/write permissions for the mounted USB disk partition. Hello Josh, You are right! It is a permission problem. I fixed it and things seem to work perfectly now. Thanks again, Michael ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
