Marcus Hallberg wrote: > HI! > > I have come across the same problem... I am to on a gentoo system and I > am running 1.38.9 on a amd64. > > My bacula configuration has been working almost perfectly for a long > time and today realized that all of my jobs that would have been run > last night had status error and the description was: > > Storage daemon didn't accept Device "computerDir" command. > and the SD has died. > > I can still restore from the SD. I restored and compared configfiles > from before and there is no difference... I have been running 1.38.9 > since july whith no significant problems. > > The problem arouses every time I try to run a job from console. > > Any input would be greatly apprecciated. > > /marcus > > Claudinei Matos wrote: > >> Hi, >> >> I have a bacula setup on my network with a director, some clients and >> a storage machine. Everything works fine (except for some troubles >> with automatic labels), but now I want to add another storage with a >> DVD recorder. >> Well, I did setup the DVD storage like the examples found over the >> site documentation but always when I do try to run the backup job I >> get an error that which says "Storage daemon didn't accept Device >> "FileStorage" command." and then bacula-sd dies with signal 11 >> (SEGMENTATION FAULT) >> Since even trying some different configurations did not solve the >> problem I'd tried to copy the working storage configuration just >> changing the necessary parameters (like name, etc) but even with a >> configuration that works on the other storage, I can't get my new >> storage to work. >> I'd started to think that maybe I have some problem with my >> installation and since I do use gentoo I'd completely removed bacula >> installation and "compiled/installed" a new one, but again, the same >> problems. >> >> Since my configuration files are corrects I do not past they here but >> just the daemon debug messages when I run the job from director: >> >> ti01-sd: cram-md5.c:52 send: auth cram-md5 >> <[EMAIL PROTECTED]> ssl=0 >> ti01-sd: cram-md5.c:68 Authenticate OK vF/KDV+sMw8u6z+5y7/vBB >> ti01-sd: cram-md5.c:97 cram-get: auth cram-md5 >> <[EMAIL PROTECTED]> ssl=0 >> ti01-sd: cram-md5.c:114 sending resp to challenge: tW+/jF+BJ9+u/k/Pl7/V6C >> ti01-sd: dircmd.c:187 Message channel init completed. >> ti01-sd: job.c:72 <dird: JobId=152 job=teste.2006-10-13_15.49.41 >> job_name=teste client_name=alpha-fd type=66 level=70 FileSet=DoConfigs >> NoAttr=0 SpoolAttr=0 FileSetMD5=4D+rUSIfDx/Fb+APhzcMEB SpoolData=0 >> WritePartAfterJob=0 PreferMountedVols=1 >> ti01-sd: job.c:125 >dird: 3000 OK Job SDid=1 SDtime=1160764425 >> Authorization=NFMG-EMJK-LKBI-MMJO-EBOG-LJAG-FGDK-FFLN >> ti01-sd: pythonlib.c:224 No startup module. >> ti01-sd: reserve.c:353 <dird: use storage=Ti01Dir media_type=File >> pool_name=Full-Splited-Pool pool_type=Backup append=1 copy=0 stripe=0 >> ti01-sd: reserve.c:376 <dird device: use device=FileStorage >> ti01-sd: askdir.c:245 >dird: CatReq Job=teste.2006-10-13_15.49.41 >> FindMedia=1 pool_name=Full-Splited-Pool media_type=File >> ti01-sd: reserve.c:146 New Vol=DVD_0002 dev="FileStorage" (/tmp) >> ti01-sd: reserve.c:700 JobId=152 looking for Volume=DVD_0002 >> ti01-sd: reserve.c:245 free_unused_olume DVD_0002 >> Kaboom! bacula-sd, ti01-sd got signal 11. Attempting traceback. >> Kaboom! exepath=/usr/sbin/ >> Calling: /usr/sbin/btraceback /usr/sbin/bacula-sd 22181 >> bsmtp: bsmtp.c:286 Fatal connect error to localhost: ERR=Connection >> refused >> Traceback complete, attempting cleanup ... >> ti01-sd: jcr.c:154 write_last_jobs seek to 192 >> ti01-sd: stored.c:550 Term device /tmp >> ti01-sd: reserve.c:200 free_volume: no vol on dev "FileStorage" (/tmp) >> ti01-sd: dev.c:1804 term_dev: "FileStorage" (/tmp) >> ti01-sd: dev.c:1691 really close_dev "FileStorage" (/tmp) >> ti01-sd: dvd.c:93 Enter unmount_dev >> ti01-sd: reserve.c:200 free_volume: no vol on dev "FileStorage" (/tmp) >> Pool Maxsize Maxused Inuse >> NoPool 256 6 0 >> NAME 130 9 9 >> FNAME 256 2 1 >> MSG 512 4 3 >> EMSG 1024 1 0 >> >> >> Thanks in any help, >> >> >> Claudinei Matos >> ------------------------------------------------------------------------ >> >> ------------------------------------------------------------------------- >> Using Tomcat but need to do more? Need to support web services, security? >> Get stuff done quickly with pre-integrated technology to make your job easier >> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Bacula-users mailing list >> Bacula-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/bacula-users >> >> > > > After a few more hours of seraching I think I have found the answer. The problem has aroused after I upgraded gcc. I found an answer in the bacula-users archive:
http://www.mail-archive.com/bacula-users@lists.sourceforge.net/msg10009.html saying that I should try to recompile bacula with O0(ohzero) instead of my O2. So I did and it seems to have worked. /marcus -- /Marcus Hallberg Wimlet Consulting AB Djurgårdsgatan 10 414 62 Göteborg mobil: 0707-141716 e-post: [EMAIL PROTECTED] hemsida: www.wimlet.se ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
