Arno Lehmann wrote:
sg does not exist for me.Hi, On 9/27/2006 3:52 PM, Hristo Benev wrote: ...I'm aware of all this, but in my case I think SW compression is better, because I have 10MB network between servers (and that is enough for my setup - except backup there is no high bandwidth demand application).Also I've tested the HW compression (on similar drive in 1999) and the backup was much slower??? and compression really bad!!!That's something I can't comment on, but I'm quite sure that with all tape drives I know compressed backups are faster as long as the uncompressed data throughput of the SCSI bus is fast enough to avoid shoeshining the tape drive.Thats why I typed the command that should disable compression, but how I can check??? mt -f /dev/tape compression offtapeinfo gives me an error tapeinfo -f /dev/tapeTry tapeinfo -f /dev/sgX tapeinfo needs to be pointed to the generig SCSI device representing your tape drive. ArnoI have st0 as device, but it gives me the same resultUse sg? not st?. st is Sscsi Tape. nst is Non-Rewinding SCSI Tape, ans sg is SCSI Generic. Arnomtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=0 (Unknown?!) mtx: Request Sense: Sense Key=Hardware Error mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx: Request Sense: ILI=no mtx: Request Sense: Additional Sense Code = C1 mtx: Request Sense: Additional Sense Qualifier = 85 mtx: Request Sense: BPV=yes mtx: Request Sense: Error in CDB=no mtx: Request Sense: SKSV=no mtx: Request Sense: Field Pointer = 00 00 INQUIRY Command Failed and mt status gives: mt status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 512 bytes. Density code 0x25 (DDS-3). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN Thank you,By the way I use RedHat based OS (CentOS 4.4) Thanks, -- Hristo Benev IT Manager WAVEROAD Partners in Telecommunications 514-935-2020 x225 T 514-935-1001 F www.waveroad.ca <http://www.waveroad.ca> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ------------------------------------------------------------------------ ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users So I cannot use it, I have only /dev/st0 and /dev/tape is link to nst0 Thank you anyway. -- Hristo Benev IT Manager WAVEROAD Partners in Telecommunications 514-935-2020 x225 T 514-935-1001 F www.waveroad.ca [EMAIL PROTECTED] |
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users