Sadly this has not helped.
Any other ideas?
Ian
| Michael Brennen <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED] 15/09/2006 02:53 PM |
|
On Fri, 15 Sep 2006, Ian Leithhead wrote:
> I am getting a 3999 error, I've checked my .conf files, the doco,
> the mailing list archives, and the net. and I am stumped. Is there
> any obvious errors below? I simply can not get the damn thing to
> mount, btape runs fine with both auto and test.
> ...
> *mount
> The defined Storage resources are:
> 1: File
> 2: Drive-1
> 3: Drive-2
> Select Storage resource (1-3): 2
> Connecting to Storage daemon Drive-1 at ABS00STAHQU001:9103 ...
> 3999 Device "Drive-1" not found or could not be opened.
I don't know what the 3999 error is. Is ABS00STAHQU001 a valid host
name on which a storage daemon is listening?
> Autochanger {
> Name = Autochanger
> Device = Drive-1
> Device = Drive-2
> Changer Command = "/opt/csw/etc/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/scsi/changer/c2t0d0
> }
>
>
> Device {
> Name = Drive-1
> Drive Index = 0
> Media Type = LTO-2
> Archive Device = /dev/rmt/0cbn
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Changer Command = "/opt/csw/etc/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/scsi/changer/c2t0d0
> AutoChanger = Yes
> # Enable the Alert command only if you have the mtx package loaded
> Alert Command = "sh -c '/opt/csw/sbin/tapeinfo -f %c |grep
> TapeAlert|cat'"
> }
In my autochanger definition, "Changer Command", "Changer Device"
and "AutoChanger" are only in the Autochanger {} definition,
examples below.
-- Michael
Autochanger {
Name = Q47
Device = Drive-0, Drive-1, Drive-2, Drive-3
Changer Command = "/path/to/bacula/mtx-changer %c %o %S %a %d"
Changer Device = "/dev/sg2"
}
Device {
Name = Drive-0
Drive Index = 0
Media Type = DLT-7000
Archive Device = /dev/nst0
AutomaticMount = yes;
AlwaysOpen = no;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
LabelMedia = yes
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
SpoolDirectory = /path/to/bacula/spool
}
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
