Hello, On 9/14/2006 12:33 AM, Michael Brennen wrote: > On Wednesday 13 September 2006 05:16 pm, Arno Lehmann wrote: > >>Hi, >> >>On 9/13/2006 11:59 PM, Michael Brennen wrote: >> >>>A quick followup on the mount request mail I just sent... >>> >>>Using the console I unmounted and remounted that volume, and it still >>>asks for a mount. Current status is below. >> >>Could you give the outout from the unmount and mount commands, and from >>'sta sd=Q47'? > > > The current status command output was already below. :)
But not what I wanted to see :-) See below. > I will add the full set of messages at the end of this mail. > > A question: how can I verify the volume label on this tape, FNI0016? Perhaps > that is not correct? > It looks like that... either follow Kerns suggestion (debug output) or unmount the device and use btape to access the volume. After unmounting, load the tape from slot 20 manually or using mtx, then run btape against that tape drive. Use the command 'readlabel' to see what Bacula finds. ... > In an earlier mail I noted that I had run 'update slots' from a fresh bacula > start, so that should match. Right... > >>Might be a bug, too, and then you'd need more details for the report >>anyway :-) > > > Fair enough. :) ... on we go... > Device status: > Autochanger "Q47" with devices: > "Drive-0" (/dev/nst0) > "Drive-1" (/dev/nst1) > "Drive-2" (/dev/nst2) > "Drive-3" (/dev/nst3) > Device "FileStorage" (/backup/bacula) is not open. > Device "Drive-0" (/dev/nst0) open but no Bacula volume is mounted. > Device is BLOCKED waiting for mount of volume "FNI0016". > Slot 20 is loaded in drive 0. > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > Positioned at File=0 Block=0 > Device "Drive-1" (/dev/nst1) is not open. > Drive 1 status unknown. > Device "Drive-2" (/dev/nst2) is not open. > Drive 2 status unknown. > Device "Drive-3" (/dev/nst3) is not open. > Drive 3 status unknown. > ==== > > In Use Volume status: > FNI0016 on device "Drive-0" (/dev/nst0) > ==== > By the way, this does not tell that his volume is loaded, only that Bacula already reserved it for use. I believe. > umount > The defined Storage resources are: > 1: LocalDisk > 2: Q47 > Select Storage resource (1-2): 2 > Enter autochanger drive[0]: 0 > 3307 Issuing autochanger "unload slot 20, drive 0" command. > 3001 Device "Drive-0" (/dev/nst0) unmounted. > > mount > The defined Storage resources are: > 1: LocalDisk > 2: Q47 > Select Storage resource (1-2): 2 > Enter autochanger drive[0]: 0 > Enter autochanger slot: 20 > 3301 Issuing autochanger "loaded? drive 0" command. > 3302 Autochanger "loaded? drive 0", result: nothing loaded. > 3304 Issuing autochanger "load slot 20, drive 0" command. > > 3305 Autochanger "load slot 20, drive 0", status is OK. > 3301 Issuing autochanger "loaded? drive 0" command. > 3302 Autochanger "loaded? drive 0", result is Slot 20. > 3905 Device "Drive-0" (/dev/nst0) open but no Bacula volume is mounted. > If this is not a blank tape, try unmounting and remounting the Volume. There! Obviously, a volume label could not be read. Try the btape test I suggested. If that shows that the tape has the correct volume it might be a problem with mtx-changer, most probably a too short wait time after laoding a tape. Hope this gets you going, Arno > 13-Sep 17:29 archive-sd: 3301 Issuing autochanger "loaded? drive 0" command. > 13-Sep 17:29 archive-sd: 3302 Autochanger "loaded? drive 0", result is Slot > 20. > 13-Sep 17:29 archive-sd: 3301 Issuing autochanger "loaded? drive 0" command. > 13-Sep 17:29 archive-sd: 3302 Autochanger "loaded? drive 0", result is Slot > 20. > 13-Sep 17:30 archive-sd: Please mount Volume "FNI0016" on Storage Device > "Drive-0" (/dev/nst0) for Job Labdepotinc-Archive.2006-09-13_16.33.14 > > >>stat storage=Q47 > > > Device status: > Autochanger "Q47" with devices: > "Drive-0" (/dev/nst0) > "Drive-1" (/dev/nst1) > "Drive-2" (/dev/nst2) > "Drive-3" (/dev/nst3) > Device "FileStorage" (/backup/bacula) is not open. > Device "Drive-0" (/dev/nst0) open but no Bacula volume is mounted. > Device is BLOCKED waiting for mount of volume "FNI0016". > Slot 20 is loaded in drive 0. > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > Positioned at File=0 Block=0 > Device "Drive-1" (/dev/nst1) is not open. > Drive 1 status unknown. > Device "Drive-2" (/dev/nst2) is not open. > Drive 2 status unknown. > Device "Drive-3" (/dev/nst3) is not open. > Drive 3 status unknown. > ==== > > In Use Volume status: > FNI0016 on device "Drive-0" (/dev/nst0) > ==== > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users -- IT-Service Lehmann [EMAIL PROTECTED] Arno Lehmann http://www.its-lehmann.de ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
