Thank You for Your answer!
But i don't think what the problem is with hardware, because 95% of
computers won't backup with concurrent job and spooling settings and
they are sun, ibm machines with good cables connected. As i said before
- when i haven't configuration with these settings all was fine. But
now i have more computers and i need such settings, because night is not
enough for backup process and i though concurrent jobs will help, but i
got this problem.
Director and Storage daemons are on different machines, but in the same
network subnet. All computers are in internal network. Tonight i will
try to backup without these settings as before i did and check maybe i
will got a new idea why it is happening.
Victoria
On Mon, 2006-08-14 at 08:54 -0500, Erich Prinz wrote:
> Hope a few others chime in here besides me.
>
> Reset by peer indicates network issues. These issues can sometimes be
> attributed to faulty hardware (NIC, Patch cable, router/switch.) The
> heartbeat gives the interaction a greater tolerance for delays due to
> slow links but won't correct underlying hardware problems.
>
> Is the Director and Storage daemon on the same machine?
>
> Is the client on your LAN or remote?
>
> Erich
>
> On Aug 10, 2006, at 3:01 AM, Victoria wrote:
>
> > Thank You for Your suggestions, but i still have the same problems.
> > And heartbeat seems doesn't help to prevent such situation.
> >
> > What else i should check?
> > I just want mentioned these problems started when i added spooling and
> > concurrent jobs.
> >
> > Thanks.
> >
> > Victoria
> >
> > On Tue, 2006-08-08 at 13:29 -0500, Erich Prinz wrote:
> >> For a start, add the 'heartbeat' directive to keep the connection
> >> alive on the FD. This is done in the FD .conf file.
> >>
> >> From the Bacula manual:
> >> Heartbeat Interval = <time-interval>
> >> This record defines an interval of time. For each heartbeat that the
> >> File daemon receives from the
> >> Storage daemon, it will forward it to the Director. In addition,
> >> if no
> >> heartbeat has been received from the Storage daemon and thus for-
> >> warded the File daemon will send a heartbeat signal to the Director
> >> and to the Storage daemon to keep the channels active. The default
> >> interval is zero which disables the heartbeat. This feature is
> >> partic-
> >> ularly useful if you have a router such as 3Com that does not follow
> >> Internet standards and times out a valid connection after a short du-
> >> ration despite the fact that keepalive is set.
> >>
> >> Erich
> >>
> >>
> >> On Aug 8, 2006, at 3:48 AM, victoria wrote:
> >>
> >>> Hello to everyone!
> >>>
> >>> I have following situation on my backup servers. First, my backup
> >>> structure is like this:
> >>> Backup server and Storage server with MySQL database.
> >>> Backup director configuration on backup server looks following:
> >>> Director {
> >>> Name = backup-dir
> >>> DIRport = 9101
> >>> QueryFile = "/opt/bacula/scripts/query.sql"
> >>> WorkingDirectory = "/var/bacula/working"
> >>> PidDirectory = "/var/run"
> >>> Password = "password"
> >>> Maximum Concurrent Jobs = 10
> >>> Messages = Standard
> >>> FD Connect Timeout = 1
> >>> }
> >>> As you can see, i am using concurrent jobs.
> >>> And SD daemon on storage server.
> >>> When i'm trying backup something i got file on storage server:
> >>> [EMAIL PROTECTED] du -h /baculabk/robber0001
> >>> 2.0G /baculabk/robber0001
> >>> But backup message is:
> >>> 07-Aug 21:15 backup-dir: No prior Full backup Job record found.
> >>> 07-Aug 21:15 backup-dir: No prior or suitable Full backup found.
> >>> Doing
> >>> FULL backup.
> >>> 07-Aug 21:15 backup-dir: Start Backup JobId 18,
> >>> Job=robber.2006-08-07_21.05.16
> >>> 07-Aug 21:15 backup-dir: Created new Volume "robber0001" in catalog.
> >>> 07-Aug 17:53 backup-sd: Labeled new Volume "robber0001" on device
> >>> "robber" (/baculabk).
> >>> 07-Aug 17:53 backup-sd: Wrote label to prelabeled Volume
> >>> "robber0001" on
> >>> device "robber" (/baculabk)
> >>> 07-Aug 17:53 backup-sd: Spooling data ...
> >>> 07-Aug 20:31 backup-sd: Committing spooled data to Volume
> >>> "robber0001".
> >>> Despooling 2,104,893,735 bytes ...
> >>> 07-Aug 20:33 backup-sd: Sending spooled attrs to the Director.
> >>> Despooling 108,212,728 bytes ...
> >>> 08-Aug 01:15 backup-dir: robber.2006-08-07_21.05.16 Fatal error:
> >>> Network
> >>> error with FD during Backup: ERR=Connection reset by peer
> >>> 08-Aug 01:15 backup-dir: robber.2006-08-07_21.05.16 Fatal error: No
> >>> Job
> >>> status returned from FD.
> >>> 08-Aug 01:15 backup-dir: robber.2006-08-07_21.05.16 Error: Bacula
> >>> 1.38.5
> >>> (18Jan06): 08-Aug-2006 01:15:58
> >>> JobId: 18
> >>> Job: robber.2006-08-07_21.05.16
> >>> Backup Level: Full (upgraded from Incremental)
> >>> Client: "robber-fd" sparc-sun-
> >>> solaris2.8,solaris,5.8
> >>> FileSet: "robber" 2006-08-07 21:15:40
> >>> Pool: "robber"
> >>> Storage: "robber"
> >>> Scheduled time: 07-Aug-2006 21:05:15
> >>> Start time: 07-Aug-2006 21:15:40
> >>> End time: 08-Aug-2006 01:15:58
> >>> Priority: 10
> >>> FD Files Written: 0
> >>> SD Files Written: 345,527
> >>> FD Bytes Written: 0
> >>> SD Bytes Written: 2,095,004,109
> >>> Rate: 0.0 KB/s
> >>> Software Compression: None
> >>> Volume name(s): robber0001
> >>> Volume Session Id: 16
> >>> Volume Session Time: 1154961001
> >>> Last Volume Bytes: 2,104,502,272
> >>> Non-fatal FD errors: 0
> >>> SD Errors: 0
> >>> FD termination status: Error
> >>> SD termination status: OK
> >>> Termination: *** Backup Error ***
> >>>
> >>> I can't restore nothing from this file.
> >>> Why it sends reset by peer? Please point me what is wrong.
> >>>
> >>>
> >>> Best Regards,
> >>> Victoria
> >>>
> >>>
> >>>
> >>> --------------------------------------------------------------------
> >>> --
> >>> ---
> >>> Using Tomcat but need to do more? Need to support web services,
> >>> security?
> >>> Get stuff done quickly with pre-integrated technology to make your
> >>> job easier
> >>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> >>> Geronimo
> >>> http://sel.as-us.falkag.net/sel?
> >>> cmd=lnk&kid=120709&bid=263057&dat=121642
> >>> _______________________________________________
> >>> Bacula-users mailing list
> >>> Bacula-users@lists.sourceforge.net
> >>> https://lists.sourceforge.net/lists/listinfo/bacula-users
> >>>
> >>
> >>
> >> ---------------------------------------------------------------------
> >> ----
> >> Using Tomcat but need to do more? Need to support web services,
> >> security?
> >> Get stuff done quickly with pre-integrated technology to make your
> >> job easier
> >> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> >> Geronimo
> >> http://sel.as-us.falkag.net/sel?
> >> cmd=lnk&kid=120709&bid=263057&dat=121642
> >> _______________________________________________
> >> Bacula-users mailing list
> >> Bacula-users@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/bacula-users
> >
> >
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
