Hello,
I'm having some problems with a HP SureStore418 autochanger. The btape
autochanger test fails
[EMAIL PROTECTED] bacula]# btape -c /etc/bacula/bacula-sd.conf
SureStore1 -d 4 -v
Tape block granularity is 1024 bytes.
btape: butil.c:272 Using device: "SureStore1" for writing.
05-Jul 13:57 btape: 3301 Issuing autochanger "loaded drive 0" command.
05-Jul 13:57 btape: 3302 Autochanger "loaded drive 0", result: nothing
loaded.
05-Jul 13:57 btape: 3301 Issuing autochanger "loaded drive 0" command.
05-Jul 13:57 btape: 3302 Autochanger "loaded drive 0", result: nothing
loaded.
btape: btape.c:338 open device "SureStore1" (/dev/nst0): OK
Copyright (C) 2000-2005 Kern Sibbald.
Version: 1.38.11 (28 June 2006)
*autochanger
Ah, I see you have an autochanger configured.
To test the autochanger you must have a blank tape
that I can write on in Slot 1.
Do you wish to continue with the Autochanger test? (y/n): y
=== Autochanger test ===
3301 Issuing autochanger "loaded" command.
Nothing loaded in the drive. OK.
3303 Issuing autochanger "load 1 0" command.
3303 Autochanger "load 1 0" status is OK.
05-Jul 13:57 btape: 3301 Issuing autochanger "loaded drive 0" command.
05-Jul 13:57 btape: 3302 Autochanger "loaded drive 0", result is Slot 1.
btape: btape.c:338 open device "SureStore1" (/dev/nst0): OK
05-Jul 13:57 btape: 3301 Issuing autochanger "loaded drive 0" command.
05-Jul 13:57 btape: 3302 Autochanger "loaded drive 0", result is Slot 1.
btape: btape.c:1198 Bad status from rewind. ERR=dev.c:678 Rewind error
on "SureStore1" (/dev/nst0). ERR=Input/output error.
The test failed, probably because you need to put
a longer sleep time in the mtx-script in the load) case.
Adding a 30 second sleep and trying again ...
3301 Issuing autochanger "loaded" command.
Slot 1 loaded. I am going to unload it.
The test failed, probably because you need to put
a longer sleep time in the mtx-script in the load) case.
Adding a 30 second sleep and trying again ...
3301 Issuing autochanger "loaded" command.
Slot 1 loaded. I am going to unload it.
3302 Issuing autochanger "unload 1 0" command.
unload status=OK 0
3303 Issuing autochanger "load 1 0" command.
3303 Autochanger "load 1 0" status is OK.
05-Jul 14:09 btape: 3301 Issuing autochanger "loaded drive 0" command.
05-Jul 14:09 btape: 3302 Autochanger "loaded drive 0", result is Slot 1.
btape: btape.c:338 open device "SureStore1" (/dev/nst0): OK
05-Jul 14:10 btape: 3301 Issuing autochanger "loaded drive 0" command.
05-Jul 14:10 btape: 3302 Autochanger "loaded drive 0", result is Slot 1.
05-Jul 14:10 btape: Fatal Error at dev.c:1525 because:
dev.c:1524 Attempt to WEOF on non-appendable Volume
btape: btape.c:1198 Bad status from rewind. ERR=dev.c:1524 Attempt to
WEOF on non-appendable Volume
--> It takes more than 10 minutes before it unloads Slot 1 then reloads
Slot 1..
--> From now on, it keeps doing that until I force stop it.
bacula-sd.conf
======================================
Director {
Name = kl-lx-bacula
Password = "xMYA5IG9wyAf7+VTTsmhYoTG5hFxxTsLcFoWZlUHN+9n"
}
Autochanger {
Name = "C6280"
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg1
}
Device {
Name = SureStore1
Media Type = DLT4000
Archive Device = /dev/nst0
Random Access = no;
AlwaysOpen = yes;
RemovableMedia = yes;
AutoChanger = yes;
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Hardware End of Medium = no
BSF at EOM = no
Backward Space Record = no
Backward Space File = no
Fast Forward Space File = no
TWO EOF = no
}
Messages {
Name = Standard
director = kl-lx-bacula = all
}
=================================================
Excerpts from bacula-dir.conf
=================================================
Client {
Name = kl-lx-bacula
Address = localhost
Catalog = mySQL
Password = "4lSo+eTgOtftol4lbqRJhRr+WR4SqY4cq6g92JaJOi99"
}
Storage {
Name = SureStore1
Address = kl-lx-bacula
SDPort = 9103
Password = "xMYA5IG9wyAf7+VTTsmhYoTG5hFxxTsLcFoWZlUHN+9n"
Maximum Concurrent Jobs = 20
AutoChanger = yes
Media Type = DLT4000
}
=================================================
Logs from /var/bacula/mtx.log
20060628-17:53:51 Doing mtx -f /dev/sg1 unload 1 0
20060628-17:54:22 Parms: /dev/sg1 loaded 0 /dev/nst0 0
20060628-17:54:22 Doing mtx -f /dev/sg1 0 -- to find what is loaded
20060628-17:54:22 Parms: /dev/sg1 loaded 0 /dev/nst0 0
20060628-17:54:22 Doing mtx -f /dev/sg1 0 -- to find what is loaded
20060628-17:54:22 Parms: /dev/sg1 loaded 0 /dev/nst0 0
20060628-17:54:22 Doing mtx -f /dev/sg1 0 -- to find what is loaded
20060628-18:03:59 Parms: /dev/sg1 loaded 0 /dev/nst0 0
20060628-18:03:59 Doing mtx -f /dev/sg1 0 -- to find what is loaded
20060628-18:03:59 Parms: /dev/sg1 loaded 0 /dev/nst0 0
20060628-18:03:59 Doing mtx -f /dev/sg1 0 -- to find what is loaded
20060628-18:03:59 Parms: /dev/sg1 loaded 0 /dev/nst0 0
20060628-18:03:59 Doing mtx -f /dev/sg1 0 -- to find what is loaded
20060628-18:05:30 Parms: /dev/sg1 loaded 0 /dev/nst0 1
20060628-18:05:30 Doing mtx -f /dev/sg1 1 -- to find what is loaded
20060628-18:05:31 Parms: /dev/sg1 loaded 0 /dev/nst0 1
20060628-18:05:31 Doing mtx -f /dev/sg1 1 -- to find what is loaded
20060628-18:05:31 Parms: /dev/sg1 loaded 0 /dev/nst0 1
20060628-18:05:31 Doing mtx -f /dev/sg1 1 -- to find what is loaded
20060704-20:48:47 Parms: /dev/sg2 loaded 0 /dev/nst0 0
20060704-20:48:47 Doing mtx -f /dev/sg2 0 -- to find what is loaded
--> I read earlier that Keith Hopkins (Bacula)" <[EMAIL PROTECTED]>
--> Had similar problems. Anyone solved it?
I running on FC5 (latest kernel) previously used 1.38.10 rpm then
upgraded to 1.38.11 rpm. I posted some questions but no one replied so I
tried compiling from source 1.38.11 and I'm getting the same problem...
tapeinfo -f /dev/sg1
Product Type: Medium Changer
Vendor ID: 'HP '
Product ID: 'C6280-4000 '
Revision: '2.07'
Attached Changer: No
SerialNumber: '
TapeAlert[25]:Undefined.
SCSI ID: 1
SCSI LUN: 0
Ready: yes
tapeinfo -f /dev/sg2
Product Type: Tape Drive
Vendor ID: 'Quantum '
Product ID: 'DLT4000 '
Revision: 'D67E'
Attached Changer: No
SerialNumber: 'CXA32R3864'
MinBlock:1
MaxBlock:16777215
SCSI ID: 2
SCSI LUN: 0
Ready: no
Can anyone give me some pointers on where to even attempt to
trouble-shoot this problem?
Regards,
Anwar
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
