On 17 Apr 2006 at 9:28, pedro moreno wrote:
> Can someone show his settings on FreeBSD i will apreciated, thanks
> all for your time.
http://www.freebsddiary.org/bacula.php
http://www.freebsddiary.org/bacula-sony-sdt-10000.php
http://www.freebsddiary.org/digital-tl891.php
That should get you started.
--
Dan Langille : Software Developer looking for work
my resume: http://www.freebsddiary.org/dan_langille.php
After reading those docs, i setup my device like this:
Device {
Name = Surestore-230
Media Type = "Ultrium 1"
Archive Device = /dev/nsa0
AutomaticMount = yes;
AlwaysOpen = yes
Offline On Unmount = no
Hardware End of Medium = no
BSF at EOM = yes
Maximum Spool Size = 5G
Spool Directory = /opt/backup/spool
Backward Space Record = no
Fast Forward Space File = no
TWO EOF = yes
}
I test the device with the btape program, fill command simple test, everything start very good but after some minutes of testing, my device error LEDs start flashing saying:
*Tape Error
*Use Clean Cartridge
And start receving on my console a lot of this messages:
ahc0: target 6 synchronous at 40.0MHz, offset = 0xf
(ahc0:A:6:0): Sending WDTR 1
(ahc0:A:6:0): Received WDTR 1 filtered to 1
ahc0: target 6 using 16bit transfers
(ahc0:A:6:0): Sending SDTR period a, offset f
(ahc0:A:6:0): Received SDTR period a, offset f
Filtered to period a, offset f
ahc0: target 6 synchronous at 40.0MHz , offset = 0xf
(ahc0:A:6:0): Sending WDTR 1
(ahc0:A:6:0): Received WDTR 1 filtered to 1
ahc0: target 6 using 16bit transfers
(ahc0:A:6:0): Sending SDTR period a, offset f
(ahc0:A:6:0): Received SDTR period a, offset f
Filtered to period a, offset f
ahc0: target 6 synchronous at 40.0MHz, offset = 0xf
(ahc0:A:6:0): Sending WDTR 1
(ahc0:A:6:0): Received WDTR 1 filtered to 1
ahc0: target 6 using 16bit transfers
(ahc0:A:6:0): Sending SDTR period a, offset f
(ahc0:A:6:0): Received SDTR period a, offset f
Filtered to period a, offset f
ahc0: target 6 synchronous at 40.0MHz, offset = 0xf
(ahc0:A:6:0): Sending WDTR 1
(ahc0:A:6:0): Received WDTR 1 filtered to 1
ahc0: target 6 using 16bit transfers
(ahc0:A:6:0): Sending SDTR period a, offset f
(ahc0:A:6:0): Received SDTR period a, offset f
Filtered to period a, offset f
ahc0: target 6 synchronous at 40.0MHz , offset = 0xf
(ahc0:A:6:0): Sending WDTR 1
(ahc0:A:6:0): Received WDTR 1 filtered to 1
ahc0: target 6 using 16bit transfers
(ahc0:A:6:0): Sending SDTR period a, offset f
(ahc0:A:6:0): Received SDTR period a, offset f
Filtered to period a, offset f
ahc0: target 6 synchronous at 40.0MHz, offset = 0xf
(ahc0:A:6:0): Sending WDTR 1
(ahc0:A:6:0): Received WDTR 1 filtered to 1
ahc0: target 6 using 16bit transfers
(ahc0:A:6:0): Sending SDTR period a, offset f
(ahc0:A:6:0): Received SDTR period a, offset f
Filtered to period a, offset f
Them i turn off my tape device and turn on, them the message dissapear.
I want to add something more, each time i restart my freebsd box, i get this error:
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
(ahc0:A:6:0): Sending WDTR 1
(ahc0:A:6:0): Received WDTR 1 filtered to 1
ahc0: target 6 using 16bit transfers
(ahc0:A:6:0): Sending SDTR period a, offset 7f
(ahc0:A:6:0): Received SDTR period a, offset f
Filtered to period a, offset f
ahc0: target 6 synchronous at 40.0MHz, offset = 0xf
(ahc0:A:6:0): Sending WDTR 1
(ahc0:A:6:0): Received WDTR 1 filtered to 1
ahc0: target 6 using 16bit transfers
(ahc0:A:6:0): Sending SDTR period a, offset f
(ahc0:A:6:0): Received SDTR period a, offset f
Filtered to period a, offset f
ahc0: target 6 synchronous at 40.0MHz, offset = 0xf
pass0 at ahc0 bus 0 target 6 lun 0
pass0: <HP Ultrium 1-SCSI E22D> Removable Sequential Access SCSI-3 device
pass0: Serial Number IE72D07695
pass0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <HP Ultrium 1-SCSI E22D> Removable Sequential Access SCSI-3 device
sa0: Serial Number IE72D07695
sa0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
Right now i already use my tape cleaner is ready to do another test, i have two new tapes, i will use one of them because my first test was with one USED tape.
But before i continue, my device settings are correct...?
Greeatings!!!
