Wolfgang Denk wrote:
In message <[EMAIL PROTECTED]> you wrote:I am infrequently getting tape full conditions at times when I did not expect it. My tapes are DDS-4 tapes and they are considered "Full" by bacula at various capacities, for exampel:Do you see any error messages in your logs - either something like this in the bacula messages: Error: block.c:538 Write error at 15:15469 on device "SLR60" (/dev/nst0). ERR=Input/output error. Error: Error writing final EOF to tape. This Volume may not be readable. dev.c:1536 ioctl MTWEOF error on "SLR60" (/dev/nst0). ERR=Input/output error.
Yes, I received following messages:04-Apr 00:48 epohost-sd: epo-xp.2006-04-03_23.14.09 Error: block.c:538 Write error at 7:1119 on device "DDS-4" (/dev/nst0). ERR=Input/output error. 04-Apr 00:48 epohost-sd: epo-xp.2006-04-03_23.14.09 Error: Error writing final EOF to tape. This Volume may not be readable.
dev.c:1536 ioctl MTWEOF error on "DDS-4" (/dev/nst0). ERR=Input/output error.04-Apr 00:48 epohost-sd: End of medium on Volume "EPOdata03" Bytes=6,445,884,582 Blocks=99,918 at 04-Apr-2006 00:48. 04-Apr 00:49 epohost-sd: Please mount Volume "EPOdata04" on Storage Device "DDS-4" (/dev/nst0) for Job epo-xp.2006-04-03_23.14.09
and/or something like this in the syslog messages:
????: unexpected disconnect
st0: Error 700ff (sugg. bt 0x0, driver bt 0x0, host bt 0x7).
????: unexpected disconnect
st0: Error 700ff (sugg. bt 0x0, driver bt 0x0, host bt 0x7).
st0: Error with sense data: <6>st0: Current: sense key: Unit Attention
Additional sense: Power on, reset, or bus device reset occurred
No, I didn't find any of these messages. However, at the time of the tape full message the attached messages showed up in the syslog. Unfortunately I am not able to digest them into any correctional activity. But at least I understand that some hardware error may be involved.
-- Regards, Erik P. Olsen.
TapeError.log.gz
Description: GNU Zip compressed data
