[EMAIL PROTECTED] schrieb: > Hi ! > > I'm unable to label my DVD. (bacula 1.38.5) > > Here is what I do : > > homer bacula # bconsole > > Connecting to Director homer:9101 > > 1000 OK: homer-dir Version: 1.38.5 (18 January 2006) > > Enter a period to cancel a command. > > *label > > Using default Catalog name=MyCatalog DB=bacula > > The defined Storage resources are: > > 1: File > > 2: DVD > > Select Storage resource (1-2): 2 > > Enter new Volume name: DVD-FULL-0001 > > Automatically selected Pool: Default > > Connecting to Storage daemon DVD at homer:9103 ... > > Sending label command for Volume "DVD-FULL-0001" Slot 0 ... > > 3910 Unable to open device "DVD-Writer" (/dev/hda): ERR=There is no > valid media in the device "DVD-Writer" (/dev/hda). > > Label command failed for Volume DVD-FULL-0001. > > Do not forget to mount the drive!!! > > *q > > However, if I run the "mediainfo" command, I have good results : > > homer bacula # "/usr/bin/dvd+rw-mediainfo" /dev/hda > > INQUIRY: [LITE-ON ][DVDRW SOHW-1673S][JS02] > > GET [CURRENT] CONFIGURATION: > > Mounted Media: 1Bh, DVD+R > > Media ID: RICOHJPN/R00 > > Current Write Speed: 2.4x1385=3324KB/s > > Write Speed #0: 2.0x1385=2770KB/s > > GET [CURRENT] PERFORMANCE: > > Write Performance: 2.4x1385=3324KB/[EMAIL PROTECTED] -> 0] > > Speed Descriptor#0: 00/0 [EMAIL PROTECTED]/s [EMAIL PROTECTED]/s > > READ DVD STRUCTURE[#0h]: > > Media Book Type: A1h, DVD+R book [revision 1] > > Legacy lead-out at: 2295104*2KB=4700372992 > > READ DISC INFORMATION: > > Disc status: blank > > Number of Sessions: 1 > > State of Last Session: empty > > Number of Tracks: 1 > > READ TRACK INFORMATION[#1]: > > Track State: blank > > Track Start Address: 0*2KB > > Next Writable Address: 0*2KB > > Free Blocks: 2295104*2KB > > Track Size: 2295104*2KB > > ROM Compatibility LBA: 262144 > > READ CAPACITY: 1*2048=2048 > > The logs are showing strange things : > > homer bacula # tail /var/log/messages > > Mar 12 18:41:37 homer isofs_fill_super: bread failed, dev=hda, > iso_blknum=16, block=16 > > Mar 12 18:41:38 homer attempt to access beyond end of device > > Mar 12 18:41:38 homer hda: rw=0, want=68, limit=4 > > Mar 12 18:41:38 homer isofs_fill_super: bread failed, dev=hda, > iso_blknum=16, block=16 > > Mar 12 18:41:38 homer attempt to access beyond end of device > > Mar 12 18:41:38 homer hda: rw=0, want=68, limit=4 > > Mar 12 18:41:38 homer isofs_fill_super: bread failed, dev=hda, > iso_blknum=16, block=16 > > Mar 12 18:41:40 homer attempt to access beyond end of device > > Mar 12 18:41:40 homer hda: rw=0, want=68, limit=4 > > Mar 12 18:41:40 homer isofs_fill_super: bread failed, dev=hda, > iso_blknum=16, block=16 > > homer bacula # > > So, I tried to burn a DVD with growisofs, and it worked : > > homer bacula # growisofs -Z /dev/dvd -R -J > /mnt/files/celine/Documents.tar.gz > > Executing 'mkisofs -R -J /mnt/files/celine/Documents.tar.gz | > builtin_dd of=/dev/dvd obs=32k seek=0' > > /dev/dvd: "Current Write Speed" is 2.5x1385KBps. > > 1.09% done, estimate finish Sun Mar 12 19:38:02 2006 > > 2.17% done, estimate finish Sun Mar 12 19:21:55 2006 > > 3.25% done, estimate finish Sun Mar 12 19:16:03 2006 > > ...... > > 98.67% done, estimate finish Sun Mar 12 19:04:48 2006 > > 99.76% done, estimate finish Sun Mar 12 19:04:47 2006 > > Total translation table size: 0 > > Total rockridge attributes bytes: 257 > > Total directory bytes: 0 > > Path table size(bytes): 10 > > Max brk space used 21000 > > 461128 extents written (900 MB) > > builtin_dd: 461136*2KB out @ average 2.2x1385KBps > > /dev/dvd: flushing cache > > /dev/dvd: closing track > > /dev/dvd: closing session > > homer bacula # > > What could be my problem ? > > Regards, > hello,
i am not sure if it helps, but check the following: 1. make sure your spool-dir exists and is writeable, we got into trouble because we had spool below /tmp which was cleared regulary 2. make sure you use the ide-scsi emulation layer for your dvd as there are problems with iso9660 sessions beyond the 2G layer 3. we needed to uncomment the -notray option in dvd-handler when using ide-scsi layer i hope this helps. cheers , Sebastian Hültenschmidt ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
