im having a problem getting bacula to work properly. Its a fresh
install, i think its properly configured, when ever i run the job to
test the backup i get:
Device status:
Device "/dev/nst0" open but no Bacula volume is mounted.
Device is BLOCKED waiting for appendable media.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
i even tried putting the "real" device name in the config file "st0"
and that doesnt work either.
also when i try to label the tape i get:
Enter new Volume name: BackupSet1
Automatically selected Pool: Default
Connecting to Storage daemon DDS-3 at mail:9103 ...
Sending relabel command from "BackupSet01" to "BackupSet1" ...
block.c:782 Read error at file:blk 0:0 on device /dev/nst0.
ERR=Input/output error.
3000 OK label. Volume=BackupSet1 Device=/dev/nst0
Catalog record for Volume "BackupSet1", Slot 0 successfully created.
Old volume "BackupSet01" deleted from catalog.
Requesting to mount DDS-3 ...
3001 OK mount. Device=/dev/nst0
this has happened on two brand new tapes. it has an error, but then
goes along to actually complete the label, is this ok? is it just that
the tape doesnt spin up fast enough or something?
ive googled about this and came up with a couple things related to
labeling the tape but none of them seemed to work. do any of you have
any other suggestions on how to track down this problem?
thanks
Nick
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
