I have a Sun v20z AMD running Bacula on Solaris 10, using a Certance Ultrium LTO 2 scsi tape device.
Sometimes I receive the following error during the nightly backup, after the first machine-job is correctly finished and bacula is trying to run the second machine-job.
Then, I tried to reuse the tape during the day, to check if the error would repeat.
So I purged the volume and restarted the jobs by hands through bconsole: everything goes fine.

Anyone have ideas about what may be the problem?

Here's the error on bacula logs:

09-Mar 23:48 iserver-sd: Enterprise_Backup_SMARTLINK.2006-03-09_21.40.00 Error: Unable to position to end of data on device "/dev/rst20". ERR=
dev.c:494 ioctl MTEOM error on /dev/rst20. ERR=I/O error.

and here's the error on /var/adm/messages

Mar  9 23:47:00 iserver scsi: [ID 107833 kern.warning] WARNING: /[EMAIL PROTECTED],0/pci1022,[EMAIL PROTECTED]/pci1000,[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (st4):
Mar  9 23:47:00 iserver         Error for Command: space                   Error Level: Fatal
Mar  9 23:47:00 iserver scsi: [ID 107833 kern.notice]   Requested Block: 0                         Error Block: 0
Mar  9 23:47:00 iserver scsi: [ID 107833 kern.notice]   Vendor: CERTANCE                           Serial Number: 0353-200
Mar  9 23:47:00 iserver scsi: [ID 107833 kern.notice]   Sense Key: Media Error
Mar  9 23:47:00 iserver scsi: [ID 107833 kern.notice]   ASC: 0x3b (sequential positioning error), ASCQ: 0x0, FRU: 0x0


Thanx for any help.
Gabriele.


Gabriele Bulfon - Sonicle S.r.l.
Tel +39 028246016 Int. 30 - Fax +39 028243880
Via Felice Cavallotti 16 - 20089, Rozzano - Milano - ITALY
http://www.sonicle.com

Reply via email to