Hello, I'm getting troubles to have an IBM Ultrium 3851 LTO working on Debian.
Probably I'm missing something about it, but all the autochanger I used just worked fine using the right /dev/sgN. In this case I cannot find any device associated with the changer; I found just one device (ID 5) for the tape, that can't be used to issue command with mtx. I tried anyway but mtx does not work, I can just have the tapes switched using mt offline, having put the autochanger in sequential mode. Because Bacula it is reported to work with this changer I would like to know what kind of configuration was used, and if in that case there was a separate scsi device ID to access the autochanger. Thanks in advance. Simone -- Simone Piccardi Truelite Srl [EMAIL PROTECTED] (email/jabber) Via Monferrato, 6 Tel. +39-347-1032433 50142 Firenze http://www.truelite.it Tel. +39-055-7879597 Fax. +39-055-7333336 ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
