On Fri, 3 Feb 2006 09:42:44 -0500 Frank Sweetser <[EMAIL PROTECTED]> wrote:
> On Fri, Feb 03, 2006 at 03:40:10PM +0100, Christoph Brunner wrote: > > Hi, > > > > this week i updated to 1.38.5 (Debian 3.1) and overhauled my > > config. Now i have an Autochanger resource and some device > > resources. > > > > 20 jobs are running simultaneously, but all on the first > > device /dev/nst0. > > > > Do you have any ideas how to force Bacula to use all available > > drives? > > Check the Prefer Mounted Volumes option in the manual at OK, now Bacula tries to use more than one drive. Unfortunately it tries to load the same volume into several drives ... I suspect to do some locking with volumes, right?! In the examples i found only some library locking. How do you cause Bacula to load only unused volumes? Best regards, Christoph Brunner > > http://www.bacula.org/rel-manual/Configuring_Director.html#SECTION000143000000000000000 > > -- > Frank Sweetser fs at wpi.edu | For every problem, there is a > solution that WPI Network Engineer | is simple, elegant, > and wrong. - HL Mencken GPG fingerprint = 6174 1257 129E 0D21 D8D4 > E8A3 8E39 29E3 E2E8 8CEC > ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
