I dont think thats the problem, I even increased the sleep time to 120
sek, just to rule it out.
Roger
Arno Lehmann wrote:
Hello,
On 02.12.2005 19:22, rkvam wrote:
Aditional information:
...
When trying to run a backup-job, bacula loads the correct tape, but
fail to use it.
If I manualy load correct tape, and in the console mount the drive
before starting the job, the job runs correct, the changer seams to
work well to, as it unload a tape, and inserting the correct tape. I
have tried to add a "sleep 10" in the load command in the
chio-changer script, without luck.
One suggestion: Have a look into your changer script - the typical linux
one, mtx-changer, has a function to wait for a drive to become ready.
You might have to do some minor modifications in the changer script you
use, but I can't tell you much as I#m using linux, not a BSD system.
Depending on the drive (and tapes) you use, it might take much longer
than 10 seconds for your drive to finish loading a tape. DLT, for
example, can take many minutes to become ready.
Arno
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
