Hello Kern,
Hello Group

Kern Sibbald wrote:

Hello Matjaz,

On Tuesday 15 November 2005 11:37, Matjaz Slibar wrote:
Dear Kern,
Dear Group

I am using bacula 1.36.2-2 on Debian Sarge with HP StorageWorks DAT72
internal tape drive. Everything is working fine, except when one backup
job spans over two tapes. In this situation Bacula destroys second
cartridge. The cartridge is not usable any more even with tar. When I
insert destroyed cartridge in the cartridge door the tape LED is
flashing and after a while it switches off. When I insert good cartridge
the tape LED is flashing and after a while it stays on.

I also tested my tape drive with btape with multiple tape option (It
works fine with simple single tape option.) and bacula again destroyed
cartridges (in this example both). I am attaching log file of this test
(btape-err.txt).

Can anybody help me? I was reading manual and searching the mailing
lists without success.

I doubt very much that Bacula can destroy a tape. It uses only normal system calls.

However, from the ouput listing you included, it *appears* that you are using "Offline on Unmount = yes". This directive is most likely causing your tape drive to "lock up" after the tape is ejected. It requres either a power off or a "load" to get it going again. The exact behavior depends a lot on the drive. If you remove this directive from your Device resource, you will probably have more luck.


Thank you for your fast answer. I tried new btape test without "Offline on Unmount = yes" in bacula-sd.conf and I destroyed another two DAT72 cartridges.

After the test I can't execute "tar cvf /dev/st0 /etc" command. (Before the test I can.) It looks like the tape drive does not recognize cartridge anymore (the tape LED is not on when the cartridge is inserted - like when no cartridge is in the tape drive). After that I insert new cartridge and the drive recognized it and I can execute "tar cvf /dev/st0 /etc" command. It does not help to power off the machine and to unplug the power cord. After reboot the tape drive still does not recognize destroyed cartridges.

I already destroyed 6 cartridges. Can I send you destroyed cartridge by mail to prove you that the cartridges are really damaged?

Can anybody report successful btape with multiple tape option test or successfully executed job which spans over two DAT72 cartridges?

Would it help to use the newest Bacula 1.38?

Best regards,
Matjaz Slibar




-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.  Get Certified Today
Register for a JBoss Training Course.  Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to