Hi there
I have bacula-1.37.40 running on an Adic Scalar100 (72 slot autochanger,
12 of which are mailbox slots) with two tape drives, and I seem to only
be able to use one of the drives at a time - am I right in thinking I
should be able to run two jobs simultaneously, one on each drive,
provided of course they are on different volumes?
Please find below the relevent configuration sections:
---------------
bacula-sd.conf:
# Scalar100 Autochanger
Autochanger {
Name = Scalar100-Autochanger
Device = Scalar100-1
Device = Scalar100-2
Changer Command = "/usr/local/bacula-1.37.40/etc/mtx-changer %c %o %S
%a %d"
Changer Device = /dev/sg1
}
# Scalar100 first drive
#
Device {
Name = Scalar100-1 #
Media Type = Ultrium-LTO-2
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Drive Index = 0
Changer Command = "/usr/local/bacula-1.37.40/etc/mtx-changer %c %o %S
%a %d"
Changer Device = /dev/sg1
AutoChanger = yes
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c '/usr/local/mtx/sbin/tapeinfo -f %c |grep
TapeAlert|cat'"
}
#
# Scalar100 second drive
#
Device {
Name = Scalar100-2 #
Media Type = Ultrium-LTO-2
Archive Device = /dev/nst1
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Drive Index = 1
Changer Command = "/usr/local/bacula-1.37.38/etc/mtx-changer %c %o %S
%a %d"
Changer Device = /dev/sg1
AutoChanger = yes
Alert Command = "sh -c '/usr/local/mtx/sbin/tapeinfo -f %c |grep
TapeAlert|cat'"
}
------------
bacula-dir.conf:
Director { # define myself
Name = breed-dir
DIRport = 9101 # where we listen for UA connections
QueryFile = "/usr/local/bacula-1.37.40/etc/query.sql"
WorkingDirectory = "/usr/local/bacula-1.37.40/var/bacula/working"
PidDirectory = "/var/run"
Maximum Concurrent Jobs = 2
Password = "asdf" # Console password
Messages = Daemon
}
...
# Definition of tape storage device
Storage {
Name = Scalar100
# Do not use "localhost" here
Address = breed # N.B. Use a fully qualified name here
SDPort = 9103
Password = "asdf" # password for Storage daemon
Device = Scalar100-Autochanger # must be same as Device in
Storage daemon
Media Type = Ultrium-LTO-2 # must be same as MediaType in
Storage daemon
Autochanger = yes # enable for autochanger device
}
-----------
When I schedule two jobs to run, which are both on different volumes,
the second job will wait till the first job has finished using the first
drive - it doesn't use the second drive:
Running Jobs:
JobId Level Name Status
======================================================================
1633 Increme Breed.2005-11-01_15.51.58 is running
1634 Increme RMAN.2005-11-01_15.52.03 is waiting on max Storage jobs
====
Any pointers on this would be greatly appreciated.
Regards
Andrew
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be entered to win a 42" plasma tv or your very own
Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
