I use the stable version 1.36.3
So that's it.. I should limit the size of each job and not setting 1 job per file...
Thanks a lot!
2005/10/25, Arno Lehmann <[EMAIL PROTECTED]>:
Hello,
On 25.10.2005 20:55, Diogo Melo wrote:
>
> I'm trying to backup using the parameter "Maximum Volume Jobs=1" and I
> get this error when I try to start more than once backup per time. At
> the end of message there is part of my bacula-sd.conf and
> bacula-dir.conf. Does anyone have any idea ? Is there an restriction
> about writting simultaneously to different files using the same device ?
You need to think not in file terms but in device terms... remember,
Bacula is (originally) a tape backup program. So, each device can access
only one volume at any given time. No exceptions.
By the way: Which version do you use?
The development version *should* at least hold the jobs and not fail
them, but for me it doesn't always do this...
Arno
> Thanks!
>
>
>
> ------------------------------------------------------------------------
> 25-Oct 16:32 en2-dir: Created new Volume "Backup0011" in catalog.
> 25-Oct 16:32 en2-sd: 1357512-lw-Backup-Full.2005-10-25_16.32.41 Fatal
> error: Device /restore/backup_disco is busy writing on another Volume.
> 25-Oct 16:34 1357512-lw-fd: 1357512-lw-Backup-Full.2005-10-25_16.32.41
> Fatal error: job.c:1665 Bad response to Append Data command. Wanted 3000
> OK data
> , got 3903 Error append data
>
> 25-Oct 16:32 en2-dir: 1357512-lw-Backup-Full.2005-10-25_16.32.41 Error:
> Bacula 1.36.3 (22Apr05): 25-Oct-2005 16:32:49
> JobId: 141
> Job: 1357512-lw-Backup-Full.2005-10-25_16.32.41
> Backup Level: Full
> Client: 1357512-lw-fd
> FileSet: "1357512-lw-lista-arquivos" 2005-10-13 13:09:31
> Pool: "PoolDisco"
> Storage: "Storage-Disco"
> Start time: 25-Oct-2005 16:32:43
> End time: 25-Oct-2005 16:32:49
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0
> SD Bytes Written: 0
> Rate: 0.0 KB/s
> Software Compression: None
> Volume name(s):
> Volume Session Id: 7
> Volume Session Time: 1130257582
> Last Volume Bytes: 0
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status: Error
> SD termination status: Error
> Termination: *** Backup Error ***
>
>
> -*-*-*-*-*-*-*-
>
> This device config at bacula-sd.conf:
>
> Device {
> Name = Disco #
> Media Type = Files
> Archive Device = /restore/backup_disco
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = no;
> RemovableMedia = no;
> RandomAccess = yes;
> LabelMedia = yes;
> }
>
>
> Part of my bacula-dir.conf:
>
> Storage {
> Name = Storage-Disco
> Address = 10.14.1.56 <http://10.14.1.56> # N.B. Use a
> fully qualified name her
> SDPort = 9103
> Password = "baculadir" # password for Storage daemon
> Device = Disco # must be same as Device in Storage daemon
> Media Type = Files # must be same as MediaType in
> Storage daemon
> Maximum Concurrent Jobs = 10
> }
>
> Pool {
> Name = PoolDisco
> Pool Type = Backup
> Recycle = yes # Bacula can automatically recycle
> Volumes
> AutoPrune = yes # Prune expired volumes
> Volume Retention = 20 days # one year
> Accept Any Volume = yes # write on any volume in the pool
> Maximum Volume Jobs = 1
> LabelFormat = "Backup"
> }
>
>
>
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
