On 7 Oct 2005 at 12:11, Mason Fischer wrote: > I keep getting tape errors from bacula. > > 19-Aug 15:04 vni-sd: backup.gaoler.2005-08-19_14.55.50 Error: Unable > to position to end of data on device "/dev/nsa0.0". ERR=dev.c:920 > ioctl MTFSF error on /dev/nsa0.0. ERR=Input/output error. > > 22-Sep 04:09 vni-sd: backup.gaoler.2005-09-22_04.05.02 Error: Unable > to position to end of data on device "/dev/nsa0.0". ERR=dev.c:920 > ioctl MTFSF error on /dev/nsa0.0. ERR=Input/output error. > > 05-Oct 09:11 vni-sd: backup.gaoler.2005-10-05_09.07.26 Error: Unable > to position to end of data on device "/dev/nsa0.0". ERR=dev.c:888 read > error on /dev/nsa0.0. ERR=Input/output error. > > I am running FreeBSD 5.3-RELEASE-p1with a sony sdx 500c > > I was wondering if the pthreads library was fixed in this release > platforms/freebsd/pthreads-fix.txt says 5.3 might have it. Also any > other ideas on what could be causeing these errors.
Did the btape tests run OK? Run the two tape test. If that works, you'll be fine. If it doesn't, then we need to look closer. -- Dan Langille : http://www.langille.org/ BSDCan - The Technical BSD Conference - http://www.bsdcan.org/ ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
